Parts for Lg LFX28968ST/05: Freezer Parts

Replacement mounting screw for refrigerator assembly. Secures components and panels inside your fridge. Order a new screw if yours is stripped or missing.

Replacement mounting screw for refrigerator panels, brackets, and internal assemblies. Restores secure fastening when original screw is missing, stripped, or damaged.

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Mounting screw for bottom-mount refrigerators. Secures internal components and panels. Replace if stripped, missing, or damaged during repair work.

Replacement mounting screw for refrigerator panels, brackets, and assemblies. Needed when original fastener is stripped, worn, or missing.

Taptite screw for securing components inside your refrigerator. Replaces lost, stripped, or corroded fasteners during repairs or reassembly.

Replacement holder bracket for refrigerators. Secures internal components in place. Order a new bracket if yours is cracked, broken, or missing.

This rear door handle replaces a worn or damaged handle on compatible LG appliances, restoring a secure grip and smooth opening. It's a direct-fit exterior handle that keeps the appliance door operating and looking right. What it does

• Provides a secure gripping point to open and close the appliance door
• Replaces cracked, loose, or broken rear handle hardware
• Restores correct alignment and feel when the door is operated
• Helps prevent further damage to the door edge from makeshift handles

• Power off and unplug the appliance before starting work; remove food or shelves as needed for access
• Keep fasteners and mounting clips; transfer original hardware unless new hardware is explicitly included
• Test door operation and alignment after installation; tighten fasteners evenly to avoid stress

Replacement freezer door handle for bottom-mount refrigerators. Installs on the freezer compartment door. Order if your handle is cracked or broken.

Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.

Adjustable leveling leg that threads into the refrigerator base frame to support and stabilize the unit. Replace worn, broken, or missing legs.

Fix uneven cooling or excess noise in your refrigerator. This air duct assembly restores proper airflow between compartments for consistent temperatures.

Freezer drawer roller assembly enables smooth gliding of your refrigerator's lower drawer. Replace if drawer sticks, wobbles, or is hard to open. Confirm fit with your model number before ordering.

Dual roller wheel assembly that mounts to the rear wall of the freezer drawer. Replace when wheels are missing, broken, or cracked for smooth sliding.

Replaces a cracked, warped, or broken drawer tray in your refrigerator. Restores level storage and smooth operation for food and items in the drawer.

Fix a cracked or broken freezer drawer basket with this lower freezer drawer tray assembly. Simple snap-in installation takes minutes to restore storage.

Replace your broken refrigerator drawer tray assembly to restore proper alignment and support for stored items. Includes complete tray structure. Verify fit with your model number before ordering.

Replace a cracked, broken, or missing refrigerator shelf. This glass shelf assembly installs on standard supports to restore organized storage space.

Replaces a cracked, bowed, or missing refrigerator shelf. Restores sturdy, level storage surface in the fresh food compartment for organized food.

Replaces a cracked, bowed, or missing refrigerator shelf. Restores sturdy, level storage surface in the fresh food compartment for organized food.

Replaces a cracked, bowed, or missing refrigerator shelf. Restores sturdy, level storage surface in the fresh food compartment for organized food.

Replace your broken or cracked refrigerator glass shelf. This tempered glass shelf installs in the fresh food compartment to organize food items.

Replace a cracked, broken, or missing refrigerator shelf. This glass shelf assembly installs on standard supports to restore organized storage space.

Secures and supports shelves inside your refrigerator. Replace if cracked, broken, or missing to properly hold shelves in place and restore stability.

Drawer slide rail guide assembly for refrigerator shelves and bins. Replaces worn, broken, or damaged rails that cause sticking or misalignment.

Right-side Fresh Room tray assembly for refrigerator pantry drawers. Replace if cracked, broken, or warped. Restores level storage in deli section.

Air duct connector for refrigerators. Channels airflow between compartments. Replace if cracked, broken, or missing to restore proper air circulation.

Replacement decor panel assembly for bottom-mount refrigerators. Covers and conceals the exterior housing. Needed when original panel is cracked, chipped, or missing.

Fix erratic operation or cycling issues in your refrigerator with this DC drive motor. Restores proper rotation and performance when the original motor fails.

Dim or uneven refrigerator lighting? This LED light cover protects the bulb assembly and diffuses light evenly. Direct-fit lens restores visibility.

Keeps refrigerator air fresh by filtering odors and contaminants. Replace every 6 months or when indicator alerts. Confirm fit with your model number.

Right-side vegetable crisper drawer for bottom-mount refrigerators. Replace if cracked, broken, or missing to restore produce storage functionality.

Left side vegetable drawer assembly for bottom-mount refrigerators. Includes wheels and track system. Replace if cracked, broken, or missing.

Replaces damaged, cracked, or missing rear cabinet panel on your television. Restores enclosure integrity and protects internal components from dust.

Chassis support piece that aligns and secures internal TV components. Replace if cracked, broken, or missing to restore secure mounting and reduce movement.

Replaces worn or broken slide rail that supports refrigerator drawer movement. Restores proper alignment for smooth, quiet gliding along the track.

Guide assembly mounts and aligns internal refrigerator components. Replace if cracked, broken, or missing to restore proper positioning and support.

Rail guide assembly for refrigerator or freezer drawers. Guides and supports the slide rail for smooth drawer movement. Replace if worn, cracked, or broken.

This rail guide assembly supports and guides a refrigerator drawer as it opens and closes. Replacing a worn or damaged rail restores smooth sliding, proper alignment, and reliable closure to help maintain a consistent seal and temperature.

• Provides the sliding track that supports the drawer under load
• Keeps the drawer level and aligned within the cabinet
• Helps the drawer close fully for a proper gasket/door seal
• Common symptoms: drawer sticks or binds, tilts or sags, won't close completely, noisy/grinding movement, visible cracks or wear

• Disconnect power and empty the drawer before starting
• Remove the drawer/bin and front panel to access the rail
• Unfasten and remove the damaged rail; transfer any reusable clips/brackets from the original if applicable
• Secure the new rail, reinstall the drawer, and verify smooth travel and full closure

Foam insulation assembly that fits inside the freezer door panel. Replace if foam is compressed, cracked, deteriorating, or missing to restore door seal.

Replace your worn freezer door gasket to restore an airtight seal. Keeps cold air in, reduces frost buildup, and maintains stable temperatures. Confirm fit with your model number before ordering.

Decorative cover for refrigerator door handle. Installs over the handle assembly to provide a finished appearance. Replace if cracked, discolored, or missing.

Cosmetic door handle trim for refrigerator doors. Replaces cracked, broken, or worn handles to restore a secure grip and finished appearance.

Covers and protects the refrigerator door hinge assembly. Replace if cracked, broken, or missing to restore a clean finished look and shield hinge parts.

Covers and protects the door hinge area on your refrigerator. Replace if cracked, broken, or missing to restore a finished look and shield wiring.

Exterior emblem nameplate that mounts to your refrigerator's front panel. Replaces missing, cracked, or faded badges to restore a clean look.

Handle assembly for bottom-mount refrigerator freezer drawers. Includes handle and operating mechanism. Replace if cracked, broken, or loose from wear.

Refrigerator door gasket seals the door to maintain temperature and prevent air leaks. Replace when worn, cracked, or not sealing properly. Confirm fit.

Door gasket creates an airtight seal to keep cold air in and warm air out. Replace if torn, cracked, or no longer sealing properly. Confirm fit by model.

Connects French doors on refrigerators. Replace if cracked, broken, or spring-damaged. Installs between doors to maintain proper seal alignment.

Replace a cracked, broken, or missing door bin on your refrigerator. Mounts inside the door for convenient storage of condiments and beverages.

Replacement door bin for refrigerator storage. Installs on the door to organize bottles, jars, and condiments. Replace if cracked, broken, or damaged.

Replacement door basket assembly for refrigerator doors. Holds condiments, bottles, and small items. Order when your bin is cracked, broken, or damaged.

Door basket assembly installs in refrigerator door to organize condiments, jars, and bottles. Replace if cracked, broken, or missing for proper storage.

Door stopper assembly for refrigerators. Installs on the door to limit opening angle and prevent wall damage. Replace if cracked, broken, or missing.

Door stop assembly for bottom-mount refrigerators. Mounts inside the door to control door closing and sealing. Replace if broken, cracked, or missing.

Fix clicking doors or misaligned refrigerator doors with a new hinge cam. Restores smooth open/close action and proper door alignment. DIY-friendly repair.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Plastic door stop that limits refrigerator door swing range. Replaces broken, cracked, or missing stoppers causing doors to swing too wide or close improperly.

Complete door handle assembly for bottom-mount and French door refrigerators. Replace cracked, bent, or loose handles to restore secure grip and door function.

Drawer rail holder for bottom-mount refrigerators. Secures drawer slide rails to the cabinet. Replace if cracked, broken, or missing to restore drawer support.

Plastic rail holder that secures shelf rails inside your refrigerator. Replace this holder if it's cracked, broken, or missing to restore proper shelf support.

Replacement drawer slide rail for refrigerator freezer compartments. Restores smooth drawer gliding when original rail is cracked, broken, or worn out.

Supports and guides refrigerator drawers for smooth gliding. Replace when worn, broken, or causing binding. Confirm fit with your model number.

Replace a worn or broken freezer drawer bar connector assembly to restore smooth gliding and proper alignment. Confirm fit with your model number.

Secures and pivots the center refrigerator door for proper alignment and sealing. Replace if your door sags, won't close fully, or pivots roughly. Verify fit by model number before ordering.

Secures and pivots the upper refrigerator door for proper alignment and smooth opening. Replace if your door sags, won't close properly, or hinge is damaged. Verify fit by model number before ordering.

Specialized spanner tool for turning slotted nuts and collars on refrigerator components. Replace if lost, worn, or damaged to safely adjust fittings.

Replacement ring for your refrigerator. Installs on internal components to secure or seal parts. Order a new ring if yours is cracked or missing.

Refrigerator mullion door won't close or seal properly? This spring operates the center divider flapper door. DIY-friendly installation in 5 minutes.

Upper door hinge assembly for bottom-mount refrigerators. Mounts at the top of the cabinet to support the door. Replace if cracked, broken, or lost.

Upper door hinge for refrigerators. Mounts on the right side to secure the door. Replace if cracked, broken, or missing to restore proper door support.

Ice freezing in holder or chute not opening fully? This ice dispenser door seals the chute to prevent frost buildup and air leaks. Easy DIY repair.

Microwave door won't latch or release properly? This lever holder bracket secures the door lever assembly to restore smooth door operation. Easy DIY fix.

Ice chute door not opening fully? This dispenser door link connects the actuator to the door for smooth operation. Simple DIY fix for binding doors.

This holder bracket secures internal refrigerator components in place. Replace if your original bracket is cracked, broken, or missing to restore stability.

Spring for the ice door lever mechanism in your refrigerator's dispenser. Replace if the spring is stretched, broken, or missing and the ice door won't stay closed.

Fix water pooling or leaks inside your refrigerator with this water funnel. Directs water flow to prevent drainage issues. Easy DIY repair in minutes.

If your refrigerator dispenser paddle is cracked, loose, or won't spring back, this lever restores reliable push-button operation and user control.

Fix a refrigerator door that won't latch or a control that doesn't respond. This lever button restores push-button function in 15 minutes or less.

Display cover assembly for refrigerator control panel. Replace if cracked, broken, or damaged. Includes control housing. Check model compatibility.

Fix a cracked or broken dispenser cover on your refrigerator. This frame protects internal components from spills and debris. Easy DIY fix.

Ice or water dispenser not responding? This lever button transfers your press to the internal switch. Moderate difficulty—requires removing drip tray.

Water pooling under your refrigerator? The drain tray collects defrost water and prevents leaks. Straightforward replacement for most bottom-mount models.

Decorative cover for your refrigerator's drain area. Replaces cracked, broken, or missing drain decor pieces. Installs in the bottom compartment.

Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.

Fix refrigerator not cooling or freezing issues with this evaporator coil assembly. Restores proper temperature control. Moderate DIY repair, 1-2 hours.

Fix a refrigerator that won't cool or start with this compressor start device. Works with the PTC thermistor to help your compressor run properly.

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Protective cover for the PTC start relay on your refrigerator compressor. Replace if cracked, broken, or missing to shield relay components from damage.

Refrigerator not cooling or making unusual noises? This compressor sealing pipe restores proper refrigerant flow. Moderate difficulty repair part.

Front cover panel for your refrigerator door. Snaps into place to restore appearance and protect controls. Replace if cracked, broken, or missing clips.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Fridge door baffle won't stay flat when opening? This door restrainer spring keeps the baffle panel sealed. Common fix for French door models.

Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.

Replacement drip tray for refrigerators. Installs under evaporator coils to catch condensation and defrost water. Replace if cracked, warped, or missing.

Refrigerator not cooling properly? This wire condenser assembly helps dissipate heat for efficient cooling. Common fix for warm fridge issues.

Refrigerator not cooling evenly or making loud fan noise? This fan grill assembly protects the fan blade and directs airflow for consistent cooling.

Frost buildup affecting cooling? This refrigerator defrost heater melts ice from evaporator coils to restore efficiency. Moderate DIY repair.

Refrigerator light stays on or door alarm won't work? This magnet switch senses door position to control interior lighting and alerts. Quick DIY fix.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Refrigerator not cooling evenly or freezer warm? The evaporator fan motor circulates cold air throughout both compartments. Direct replacement part.

Powers the dispenser cover door mechanism on your refrigerator. Replace if the motor has worn out, failed, or no longer operates the cover smoothly.

Uneven cooling or noisy damper? This damper motor support bracket secures the air control assembly for proper airflow between compartments. DIY fix.

Refrigerator not cooling properly? This damper motor support secures the air damper assembly that controls airflow between compartments. Simple DIY fix.

Controls ice dispenser door opening and closing. Replace if door won't open, stays open, or motor makes no sound when dispensing. Mounts behind dispenser trim.

Fix unresponsive controls or features that won't activate with this refrigerator push button switch. Simple replacement restores button functionality.

Supports and stabilizes your refrigerator door for proper alignment. Replace if bracket is cracked, broken, or causing door misalignment issues.

Fix uneven cooling or warm spots in your fridge with this evaporator fan motor assembly. Circulates cold air throughout refrigerator compartments.

Replaces cracked or yellowed interior light lens. Protects bulb from moisture and impact while ensuring even illumination. Verify fit by model number.

Compressor humming but not starting? This start capacitor provides stable starting power to your refrigerator compressor. DIY-friendly repair.

Refrigerator won't start or compressor struggles to run? The run capacitor provides the power boost needed to start and maintain compressor operation.

Fixes refrigerator power loss, sparking, or intermittent operation. This power cord assembly restores safe electrical connection from wall outlet to appliance.

Fix a refrigerator that won't cool, has no display, or won't power on. This power control board assembly restores electrical function and system control.

Fix refrigerator not cooling, lights not working, or dispenser failure with this main control board. Controls cooling cycles, defrost, and functions.

Protective cover assembly that shields the printed circuit board (PCB) in your refrigerator. Replace if cracked, broken, or missing to protect electronics.

Dim or uneven refrigerator lighting? This interior light cover assembly shields the bulb and diffuses light evenly. Simple 5-minute snap-in repair.

The Ice Maker Assembly Kit is an OEM part for LG refrigerators. This kit includes all the necessary components to produce ice efficiently, ensuring your refrigerator maintains a steady supply of ice for your household. The kit also features a 20-pin and 3-pin wiring harness.

Causes of a bad ice maker assembly can include wear and tear over time, mineral buildup from hard water, or electrical malfunctions. Additionally, damage can occur due to improper handling or issues with other components in the ice-making system.

Symptoms of a bad ice maker assembly include:

• No ice production
• Slow ice production or smaller ice cubes
• Ice cubes that are misshapen or irregular
• Leaking water around the ice maker
•  Unusual noises during the ice-making process

This OEM LG part is also compatible with Sears/Kenmore.

Refrigerator not cooling properly? A failed evaporator fan motor stops cold air circulation. This motor replacement restores airflow across the coils.

Fix inaccurate temperature readings or sensor errors with this refrigerator sensor control board. Restores proper sensor communication and feedback.

Freezer not cooling below 24°F or refrigerator running too warm? This defrost thermostat sensor monitors temperature and signals the control board.

Ice maker not producing ice or auger not dispensing? This ice maker and auger motor assembly restores automatic ice production and dispensing function.

Stores and supplies water to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged from mineral buildup or freezing.

Leaking water line connections? This inline tube connector joins two sections of tubing for a secure, leak-resistant seal. Quick 10-minute fix.

Fix water leaks from your refrigerator with this water line tube assembly. Stops leaks caused by brittle or kinked tubing and restores normal flow.

Fix water leaks from your refrigerator with this water line tube assembly. Stops leaks caused by brittle or kinked tubing and restores normal flow.

If your refrigerator's water dispenser or ice maker stopped working, the water tank assembly may need replacement. Restores proper water flow and ice production.

Leaking water from your refrigerator or no water/ice from dispenser? This water inlet valve controls flow to ice maker and dispenser. DIY repair in 30 min.

Plastic cover cap for refrigerators. Snaps onto hinges, handles, or shelving brackets to conceal mounting hardware. Replace when cracked or missing.

This water filter head assembly holds the water filter and connects the water lines to the filter.

Fix loud jackhammer sounds or weak water flow from your refrigerator dispenser. This filter head assembly houses the water filter inside the fridge.

Allows water to flow directly to your dispenser and ice maker without filtration. Install when choosing not to use a water filter. Confirm fit by model.

Removes impurities and contaminants from water and ice. Replace every 6 months or 200 gallons for clean, fresh-tasting water. Verify fit by model.

Covers and protects refrigerator tubing inside the cabinet. Replace this tube cover if the original is cracked, broken, or missing to restore proper appearance.

Refrigerator pipe holder bracket secures water lines and tubing in place. Replace if cracked, broken, or missing to properly support pipes inside your fridge.

This replacement pipe holder secures a small appliance pipe or tube in place, reducing movement and vibration to help prevent noise, wear, or accidental disconnection. It restores proper routing and support for the pipe. What it does:

• Secures a pipe or tubing to the appliance frame or chassis to keep it from shifting
• Reduces rattling or vibration caused by loose plumbing or tubing
• Helps maintain proper alignment to avoid chafing or contact with other components
• Useful when a cracked, broken, or missing clip allows pipe movement

• Turn off and unplug the appliance before accessing internal components
• Remove any panels or covers to reach the pipe clip location
• Snap the clip over the pipe into the existing mounting tab; replace any damaged mounting hardware

Home bar cover panel for bottom-mount refrigerators. Replaces cracked, broken, or missing exterior home bar covers. Restores appearance and finish.

Secures and pivots the ice bank door for smooth opening and proper sealing. Replace if door sags, won't close, or ice dispenser misaligns. Confirm fit.

Seals your refrigerator door to keep cold air in and warm air out. Replace if torn, cracked, or not sealing properly. Confirm fit with your model number.

Seals the ice bin compartment to prevent warm air and moisture intrusion. Replace when worn or torn to reduce frost buildup and ice clumping.

Molded trim cover that fits over the ice maker door lever on bottom-mount refrigerators. Replace if cracked, broken, or missing to restore appearance.