Inglis Parts

The Thermal Fuse is an OEM replacement part for Whirlpool dryers. It is a safety component installed within the dryer's control circuit. The fuse monitors current levels and helps prevent overheating by interrupting power flow should excessive amperage pass through the wires.

Causes of a bad fuse can include electrical surges, a malfunctioning heating element drawing too much current over time, or continual overloading of circuits.

Symptoms of a blown thermal fuse include:

• The dryer not powering on at all
• Powering on but failing to start or progress through cycles
• Buzzing or humming noises from the control area
• Repeatedly tripping of circuit breakers

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore dryer models.

This replacement screen filters out debris before it reaches critical components, helping maintain proper flow and overall performance. Replacing a damaged or clogged screen protects the system from blockages that can lead to poor operation. What it does:

• Traps particles to prevent clogs in passages, pumps, or valves
• Helps maintain proper water or air flow through the system
• Protects internal components from damage caused by debris
• Common signs it may need replacement: visible tears or warping, heavy buildup, recurring clogs, restricted flow, or related error codes

• 1 screen

• Disconnect power; shut off the water supply. Wear gloves and eye protection.
• Access the screen. Note orientation before removal and clean the area of any debris.
• Seat the new screen fully and evenly; do not force or bend it.
• Reassemble, restore power/water, and run a brief test to confirm proper operation and flow.

The Agitator Base is an OEM part for Whirlpool washing machines. This component is located at the bottom of the agitator assembly and is responsible for supporting the agitator while it moves clothes during the wash cycle. This is the bottom half of the agitator. For a complete agitator search by your model. If your model does not list one you can order 285565

Over time, the agitator base can wear out or become damaged due to constant use, heavy loads, or exposure to harsh detergents. A compromised agitator base can lead to inefficient washing and potential damage to other parts of the washer.

Symptoms of a bad agitator base include:

• The agitator not moving properly or becoming loose
• Unusual noises during the wash cycle
• Clothes not being cleaned effectively
• The washer shaking or vibrating excessively

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Washer Gear Case is an OEM part for Whirlpool washing machines. It is a critical component that houses the gears responsible for the rotation and agitation of the washer drum. This gear case ensures that the washer performs its washing cycles effectively by providing the necessary mechanical movements.

Causes of a bad gear case can include wear and tear from prolonged use, lubrication breakdown leading to increased friction, or damage from overloading the washer. Additionally, exposure to water leaks can lead to corrosion and deterioration of the internal components.

Symptoms of a bad gear case include:

• Unusual grinding or clunking noises during the wash cycle
• The drum not spinning or agitating properly
• Leaks of oil or grease underneath the washer
• The washer failing to complete its cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Inlet Valve is an OEM part for Whirlpool washing machines. It controls the flow of water into the washing machine during the wash and rinse cycles. This valve ensures that the correct amount of water is delivered to the tub, enabling optimal washing performance and efficiency.

You should replace the water inlet valve if it becomes faulty or damaged. Common causes of a bad water inlet valve can include mineral deposits or debris clogging the valve, wear and tear from regular use, or electrical issues affecting the valve's operation. A malfunctioning valve can lead to improper water levels and poor washing results.

Symptoms of a bad water inlet valve include:

• Washing machine not filling with water
• Washer filling slowly or with low water pressure
• Leaks around the valve area
• Washer not advancing to the wash or rinse cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Hose is an OEM replacement part for Whirlpool washing machines. It is a flexible tube responsible for draining and expelling the used water from the washer tub after each wash cycle.

Symptoms of a faulty drain hose include:

• Water leaks around the hose connections or along its length
• Slow draining or improper drainage of the tub
• Visible cracks, bulges, or damage to the hose material

Causes of a bad washer drain hose can include normal wear and tear over time, exposure to high water pressure or temperatures, physical damage from kinks or pinches, or improper installation or connections.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models. 

The Water Inlet Valve is an OEM part for Whirlpool washing machines. This part controls the flow of water into the washer during the filling cycles. This valve ensures that the correct amount of water is delivered to the tub, allowing for optimal washing performance.

Causes of a bad water inlet valve can include mineral buildup, electrical issues, or wear and tear from regular use.

Symptoms of a bad water inlet valve include:

• The washer not filling with water
• Slow filling or incorrect water temperature
• Water leaking from the valve
• The washer filling continuously or not at all

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Washer Pump Assembly, Drain, is an OEM part for Whirlpool washing machines. This component is essential for removing water from the washer tub during the drain cycle, ensuring that clothes are properly rinsed and spun dry.

Common causes of a bad drain pump include blockages from lint, debris, or foreign objects, wear and tear from regular use, and electrical issues such as a burned-out motor. These problems can prevent the pump from effectively draining water.

Symptoms of a bad drain pump assembly include:

• Washer not draining properly or at all
• Unusual noises during the drain cycle
• Water left in the washer after the cycle completes
• Error codes related to drainage issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Agitator is an OEM replacement part for Whirlpool top-loading washing machines. Situated vertically at the center of the wash basket, this post facilitates rotation and cyclonic movement of clothes during cycles.

Causes of an impaired agitator include cracking at mounting points allowing excessive wobble or detachment from the central drive shaft over multiple years of use. Mineral buildup can also scale components making smooth operation difficult.

Symptoms involve:

• Uneven wetting and inadequate oscillations leave clothes soiled
• Excessive vibrations and noise from an off-center agitator
• Inability to properly distribute detergent throughout the load

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.

The Latch is an OEM replacement part for Whirlpool washing machines. This component ensures the washer's door or lid is securely closed during operation, preventing water spillage and ensuring the safety of the user by halting operation when opened.

Causes for a malfunctioning Latch can include mechanical wear from frequent use, damage from forceful closing or opening, or electrical issues affecting its signaling capability to the washer's control system.

Symptoms of a bad Latch include:

• The washing machine's door or lid not closing securely
• The appliance not starting or pausing mid-cycle due to latch issues
• Error codes or indicators signaling latch or door problems
• The need for excessive force to open or close the door or lid

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Switch is an OEM part for Whirlpool dryers, designed to ensure the appliance operates safely by detecting whether the dryer door is open or closed. This switch plays a crucial role in the dryer's operation, as it prevents the dryer from running when the door is not securely latched, thereby ensuring safety during its use. 

The primary reasons for replacing the Door Switch often involve wear and tear from regular use, damage from an overloaded door, or accidental impacts that compromise the switch's integrity. 

Symptoms for a replacement Door Switch include:

• The dryer not starting or operating when the door is closed
• The dryer continuing to run when the door is opened
• Unusual noises or the appliance starting and stopping abruptly, which may indicate a faulty connection

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Cut-Off Terminal is an OEM part for Whirlpool dryers. This component acts as a safety device that cuts off the electrical circuit to prevent overheating. It is crucial for maintaining the dryer's safe operation and ensuring that the appliance does not overheat, which could lead to potential fire hazards. The kit contains a 325°F thermal fuse and a 250°F high limit thermostat. Use a multimeter to test the old fuse for continuity at room temperature; it should read zero ohms.

Causes of a bad cut-off terminal can include excessive lint buildup leading to overheating, electrical issues, or wear and tear from regular use. These factors can cause the terminal to fail, preventing the dryer from operating safely.

Symptoms of a bad cut-off terminal include:

• Dryer not starting
• Dryer overheating
• Dryer shutting off mid-cycle
• No heat during the drying cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Lint Screen Housing Assembly is an OEM part for Whirlpool dryers. It houses the lint screen, which captures lint and debris from the drying cycle, preventing it from clogging the dryer vent and ensuring efficient airflow.

Causes of a bad housing assembly can include cracks or breaks due to frequent handling, wear and tear over time, or accidental impact. A faulty housing can compromise the lint screen's ability to trap lint effectively, leading to potential ventilation issues.

Symptoms of a bad lint screen housing assembly include:

• Lint screen not fitting properly
• Visible cracks or damage to the housing
• Increased lint buildup inside the dryer
• Longer drying times due to restricted airflow

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Agitator is an OEM part for Whirlpool washing machines. It is a crucial component that provides the mechanical action necessary for effective cleaning during the wash cycle. The agitator spins, agitating the water and clothes, creating the friction and motion required to remove dirt and stains.

Causes of a bad agitator can include wear and tear from prolonged use, damage due to impact or foreign objects getting caught in the agitator, or issues with the agitator's coupling or connection to the transmission system.

Symptoms of a bad agitator include:

• Inadequate or ineffective washing performance
• Excessive noise or grinding sounds during the wash cycle
• Leaks or water spillage due to a damaged agitator seal
• Visible cracks or damage to the agitator structure

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Push-to-Start Switch is an OEM replacement part for Whirlpool dryers. This component is the button you press to initiate the drying cycle. Once pressed, the switch sends an electrical signal to the dryer's motor, activating the machine and beginning the drying process.

Causes for a malfunctioning Push-to-Start Switch can include electrical issues, wear and tear from frequent use, or damage due to mishandling or accidental impact.

Symptoms of a bad Push-to-Start Switch include:

• Dryer not starting despite pressing the button
• The need to press the button multiple times for activation
• Intermittent starting and stopping of the dryer
• Unusual sounds when pressing the switch

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Fabric Softener Dispenser is an OEM replacement part specific to  Whirlpool washing machines. It is responsible for accurately dispensing the appropriate amount of liquid fabric softener during the rinse cycle to soften and protect clothes. 

Causes of a bad fabric softener dispenser can include clogging of the dispenser or dispensing mechanisms from residue buildup, cracks or openings in the plastic housing allowing for leaks, broken or malfunctioning electronic components controlling the dispensing process.

Symptoms of a bad fabric softener dispenser include:

• Improper dispensing of fabric softener resulting in excess or insufficient softener  
• Leaking or dripping of softener from the dispenser housing
• The dispenser door or lid not opening or closing properly
• Liquids dispensing at the wrong times during cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.