Jenn-Air Range Heating Element

This broil heating element provides the upper-oven heat for broiling and high-temperature cooking. Replaces a failed or damaged upper element to restore broil performance and even top-heat browning. What it does:

• Produces direct top-oven heat used for broiling and finishing dishes
• Restores broil function when the upper element no longer heats
• Helps eliminate uneven browning or food that won't crisp on top
• Shows visible signs of failure such as burning, breakage, or no heat

• One broil (upper oven) heating element

• Disconnect power (unplug or switch off breaker) before starting any work
• Handle element carefully to avoid bending or damaging terminals
• Electrical connections are secure and routed clear of interior surfaces
• After installation, restore power and test broil function; replace oven light cover or insulation as needed

This surface cooktop element provides the heating source for electric ranges and replaces a damaged or non-working burner to restore normal cooking heat. Designed to match OEM fit and function for compatible Whirlpool ranges. What it does:

• Heats cookware for stovetop cooking when the burner control is turned on
• Replaces a burned-out or broken surface element that no longer heats
• Can resolve symptoms like no heat from the burner, intermittent heating, or visible damage to the element
• Restores even heating when the original element has hot spots or partial failure

• Disconnect power at the breaker or unplug the range before servicing to avoid shock
• Allow the element and cooktop to cool completely before removing or installing
• Remove the old element by unplugging the connector or detaching mounting hardware, then connect the new element securely

This oven broil element replaces a failed upper heating element to restore direct top-heat broiling for searing and browning. It provides a straight, OEM-style replacement that fits into the oven cavity and reconnects to the existing terminals. What it does:

• Heats when the oven is set to Broil, delivering direct radiant heat from the top of the oven
• Restores proper browning, searing and finishing of foods when the original element fails
• Common symptom fix: element does not glow, no broil heat, or uneven top heating
• Works as a direct replacement when the original element is visibly burned, broken, or open

• Disconnect power at the breaker or unplug the range before beginning any work
• Remove the oven racks and access screws, then carefully pull the old element forward from its terminal block
• Match terminal type and orientation before reconnecting; handle terminals gently to avoid bending

This surface heating element restores dependable heat to a burner on your range or cooktop. Also called a surface burner or top burner element, it delivers the cooking temperature for that zone when the control sends power. What it does:

• Generates heat for one cooking zone on the cooktop
• Common symptoms: burner won't heat, heats unevenly or only partway, takes too long to heat, or shows visible damage
• Helps isolate a single-burner failure when other surface elements still work
• Replaces a damaged or open element to restore consistent heating

• 1 surface element

• Disconnect power at the breaker and allow the cooktop to cool completely
• Access the element per your model (remove burner pan or lift the glass top)
• Note/photograph wiring and transfer any brackets or clips; move wires one at a time to matching terminals
• Ensure the element sits flat and all connections are secure before reassembly and testing

This surface radiant element sits beneath the glass cooktop and generates heat for one cooking zone. Replacing a failed element restores proper heating performance and dependable temperature response on the affected burner.

• Supplies electric heat to the selected surface burner under the glass top
• Common symptoms: burner won't heat, heats weakly or inconsistently, or only part of the ring glows
• Visual damage (burn spots/breaks) or an open reading on a continuity test indicate replacement
• Similar symptoms can also result from a faulty surface switch or wiring—diagnose before replacing

• Disconnect power at the breaker and allow the cooktop to cool completely
• Lift/remove the glass top per your service manual to access the element
• Note wire positions and bracket orientation; move wires one at a time to matching terminals
• Support the glass and avoid stressing the element; test operation before final reassembly

This radiant surface element restores proper heat to a glass-ceramic cooktop burner. When the original element burns out or develops hot spots, replacing it brings back steady, controllable heat for everyday cooking. What it does:

• Generates heat for the selected cooking zone beneath the glass top
• Works with the surface control to cycle on/off and regulate temperature
• Helps deliver even heating across cookware
• Common fix for: burner won't heat, heats slowly or unevenly, only part of the burner heats, visible damage on the element

• 1 radiant surface element

• Disconnect power at the breaker and allow the cooktop to cool completely
• Support and handle the glass top carefully to avoid damage
• Note wire locations and transfer any mounting hardware from the old element
• After reassembly, test the burner on low and high settings

This surface heating element replaces a damaged or nonworking stovetop burner to restore even heat for cooking. It fits most compatible electric ranges and gives you a direct replacement for a faulty top burner element. What it does

• Provides the heating element that transfers heat to cookware on the cooktop
• Restores proper burner heat when an element no longer warms or cycles correctly
• Helps eliminate uneven cooking or intermittent on/off heating from a failed element
• Works as a direct replacement for the corresponding top/burner element on compatible ranges

• Disconnect power to the range before removing or installing the element to avoid electrical shock
• Pull the element straight out of the terminal block; avoid bending terminals or damaging the receptacle
• Inspect the burner receptacle for damage and replace if corroded or loose
• After installation, test the element on low and high settings and watch for proper operation

This is a replacement warming-zone element for electric ranges that restores the low-heat surface used to keep food warm or slow-heat dishes. It fits into the dedicated warming area and reconnects the circuit for normal operation. What it does:

• Heats the warming zone so dishes stay warm without using a full cooktop burner
• Replaces a cracked, non-heating, or intermittently heating warming element
• Restores proper low-temperature performance when the warming area no longer warms evenly
• Works with the range's control and thermostat to maintain low heat

• Disconnect power at the breaker or unplug the range before starting any repairs
• Typical install requires removing the cooktop or warming cover to access and secure the element
• Handle element carefully to avoid bending or damaging terminals; verify electrical connections are tight

This warming element is the heating element for a range or oven warming drawer that keeps food at serving temperature. It restores gentle, consistent heat so dishes stay warm until ready to serve. What it does:

• Heats the warming drawer cavity to maintain food temperature
• Common symptom: warming drawer fails to get or stay warm
• Works with the drawer's thermostat and control circuitry to regulate temperature

• One warming element

• Disconnect power to the appliance before starting any repair
• Access typically requires removing the warming drawer and trim; handle the element carefully to avoid damage
• Inspect connectors and wiring for heat damage and replace any compromised components