Kenmore / Sears Dryer Bearing Parts

Best Seller

Genuine Ge part

Kenmore Dryer Front Bearing Drum Slide Green 2-Pack

By: Ge

Part Number: WE03X37317

The Dryer Front Bearing Drum Slide (Green, 2-Pack) is an OEM replacement part for GE dryers. These slides are located on the front panel of the dryer and work to support the drum as it rotates. The green slides are designed to reduce friction between the drum and the panel, ensuring smooth operation and helping to prolong the life of the appliance.

Over time, these slides can wear out due to constant movement, heat, and friction. When worn or damaged, the drum may not rotate as intended, leading to noise and reduced efficiency.

Symptoms of bad dryer front bearing drum slides include:

Squeaking or grinding noises during operation
The drum appearing loose or sagging at the front
Clothes not drying evenly or taking longer to dry
Visible wear or thinning on the existing drum slides

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer began to take much longer to dry clothing what once took 30 minutes now took 2 hours Steven M. • Monett , MO • July 10, 2015

We cleaned out all ducts carefully and did other basic troubleshooting but it did not help. Began to research the problem on-line and discovered that this dryer has two heating elements. One can fail while the other continues to provide heat - but with a large impact on drying time. Watched youtube videos and how to take apart the dryer to reach the heating coils. Tested the heating elements for continuity with tester and the outer loop had no continuity indicating it was broken somewhere. ... Read more

$28.95

Compare At:: $34.45
You Save:: $5.50

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore Dryer Drum Front Support Bearing

4.9 (280)

By: Ge

Part Number: WE3M26

The Dryer Drum Front Support Bearing is an OEM part for GE dryers, designed to support the front of the dryer drum as it rotates. This crucial component ensures smooth and quiet operation by reducing friction and providing a stable surface for the drum to spin on.

Causes of a bad Dryer Drum Front Support Bearing include excessive wear due to age or overuse, a buildup of lint and debris causing additional friction, or improper loading of the dryer, which can lead to uneven wear.

Symptoms of a bad Dryer Drum Front Support Bearing include:

Unusual noises, such as squeaking or grinding, during operation
Excessive vibration or shaking of the dryer
The drum may have difficulty turning, or it may seem to be stuck
Increased drying times if the drum is not spinning efficiently

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms

Marks left on clothes
Noisy

Do-It-Yourself Stories from Customers like You The drum front support bearing was breaking Stuart E. • Rochester , NY • December 14, 2024

I followed the directions I found on YouTube for removing the front of the dryer. It was fairly easy, with two screws to remove the top and another two to remove the front. Just use a hand Phillips screwdriver, you will have difficulty using a typical power screwdriver due to space limitations. Watch the tabs on the top that engage with the control panel. Push the top to the left to disengage. I broke one of the three. One connector and two fastons needed to be disconnected on the front. ... Read more

$34.25

Compare At:: $52.23
You Save:: $17.98

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Kenmore Rear Drum Bearing Kit

4.9 (874)

By: Frigidaire

Part Number: 5303281153

The Rear Drum Bearing Kit is an OEM replacement part for Frigidaire dryers. It contains a set of parts responsible for supporting the rear end of the dryer drum, allowing it to rotate smoothly and efficiently during the drying cycle.

Symptoms of a faulty Rear Drum Bearing Kit include:

Excessive noise or grinding sounds coming from the rear of the dryer
Difficulty in rotating the drum or drum not turning at all
Visible signs of wear or damage on the existing bearings
Increased vibrations or shaking during the drying cycle

Causes of needing to replace the rear drum bearing kit can include normal wear and tear over time, exposure to excessive heat or lint buildup, or physical damage due to impact or overloading.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryer models.

NOTE: The metal plate holes are not threaded. Use the self-tapping screws provided in the kit to thread the plate.

This part fixes the following symptoms

Noisy
No heat or not enough heat
Marks left on clothes

Do-It-Yourself Stories from Customers like You After 7 years of quiet service the dryer drum started squeaking very loud! Douglas D. • Columbia , MO • March 08, 2016

I found a video on Youtube which described dryer drum squeaks as most likely caused by a worn rear drum bearing. I located the model number on the inside lip of the dryer door: Frigidaire Affinity LEQ6000ES2. I googled "frigidaire affinity dryer squeak". I got a link for my friends at AppliancePartsPros.com! I've used Appliance PartsPros 3 times before, so I figured I was in a "one-stop-solution" situation. I ordered a rear drum bearing kit as well as a dryer drum belt (after nearly 7 years... Read more

$44.95

Compare At:: $53.49
You Save:: $8.54

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore Rear Drum Bearing Kit

4.8 (407)

By: Ge

Part Number: WE25M40

The Rear Drum Bearing Kit is an OEM replacement part for GE dryers. It is a comprehensive kit that includes both rear drum bearings and necessary mounting hardware. These bearings play a vital role in smoothly rotating the dryer drum during cycles, reducing vibrations and noise.

Symptoms of bad bearings include:

Excessive shaking or vibrating during cycles
Loud grinding or scraping noises emanating from the rear drum area
Difficulty turning or rotating the dryer drum by hand
Increased wear and early failure of other components

Causes of bad bearings can include normal wear and tear over time, exposure to excessive loads or unbalanced loads that strained the bearings, or damage from extended use without proper lubrication.

This OEM replacement is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Noisy

Do-It-Yourself Stories from Customers like You Very loud squeal noise Thomas P. • Dundalk , MD • June 05, 2018

Repair went well, replaced the pulley wheel, belt, rear drum bearing. Had an issue after replacement with the dryer stopping after ~5mins or so when running with heat. Fluff cycle would run fine. Details: The lock nut on the pulley wheel didn't feel tight enough so i tried to crimp it back on the pulley arm. It then became way too lose. I had to replace it with a plastic washer I had in my toolkit. That fit snug and seems to work fine. I also added some grease to the pulley shaft under... Read more

$73.95

Compare At:: $88.74
You Save:: $14.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore Dryer Bearing Slide 2-Pack

4.9 (46)

By: Ge

Part Number: WE03X37320

The Bearing Slide Assembly is an OEM component for GE electric clothes dryers. As an integral part of the dryer tumbler system, this assembly includes the bearing slides that allow smooth rotation of the tumbler drum during drying cycles.

Symptoms of faulty bearing slides include:

Abnormal vibrations or shaking of the dryer cabinet
Noisy operation that gets louder over time
Rubbing or grinding sounds coming from inside the machine
Reduced tumbler movement or inability to manually turn the drum

Causes involve general wear of plastic bearing surfaces from years of drum rotation as well as potential damage or misalignment from excess stress on the slides.

This GE OEM replacement helps maintain balanced tumbler movement. Compatible with Hotpoint, RCA, and some Kenmore dryers using the bearing slide assembly design.

Do-It-Yourself Stories from Customers like You Dryer drum problem Tonya B. • Ithaca , NY • December 24, 2022

A thumping sound (like sneakers in the dryer) started happening. We stopped using it so that it wouldn't get worse and potentially break more parts. Online research suggested rear drive shaft would be the problem. But also suggested while we have the dryer apart, would be smart to replace the belt and the slides/glides (green and white plastic tabs in front, attached to the door). We ordered all the parts from AppliancePartsPros.com and they arrived FAST. It helps to have two people for this... Read more

$23.95

Compare At:: $28.50
You Save:: $4.55

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore Dryer Bearing Slide 2-Pack

4.9 (43)

By: Ge

Part Number: WE03X37319

The Dryer Bearing Slide (2-Pack) is an OEM replacement part for GE dryers. These slides are installed on the front panel of the dryer and support the drum as it rotates. They help reduce friction and wear, ensuring smooth and quiet operation during drying cycles. This pack includes two bearing slides, which are commonly used together in the dryer assembly.

Over time, bearing slides can wear down due to regular use, heat, and friction. When they become worn or damaged, the drum may no longer rotate smoothly, which can affect the dryer's performance and increase noise levels.

Symptoms of bad dryer bearing slides include:

A loud squeaking or scraping noise during operation
Difficulty rotating the drum manually
Clothes taking longer to dry due to improper drum movement
Visible wear or thinning on the existing slides

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer drum problem Tonya B. • Ithaca , NY • December 24, 2022

$15.95

Compare At:: $18.98
You Save:: $3.03

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore Bearing Ring For Front Support

4.8 (92)

By: Whirlpool

Part Number: 279441

The Bearing Ring for Front Support is an OEM part for Whirlpool dryers. It provides support and stability to the dryer's front drum. The bearing ring helps to reduce friction and ensure smooth rotation of the drum during the drying cycle. It helps to maintain proper alignment and balance, preventing excessive noise and vibration during operation.

A bad bearing ring can occur due to wear and tear over time, high usage, or damage from foreign objects getting caught in the drum. If the bearing ring becomes worn, cracked, or damaged, it can lead to loud squeaking or grinding noises coming from the dryer.

Symptoms of a bad bearing ring for front support include:

Loud squeaking or grinding noises during operation.
Excessive vibration or shaking of the dryer.
Difficulty in rotating the drum manually.
Visible damage or wear on the bearing ring.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Marks left on clothes

Do-It-Yourself Stories from Customers like You Gas dryer did not heat and excessive lint inside the unit James C. • New Boston , MI • July 20, 2017

Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered... Read more

$53.95

Compare At:: $64.20
You Save:: $10.25

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore Rear Drum Bearing Sleeve

4.8 (105)

By: Ge

Part Number: WE1M462

The Rear Drum Bearing Sleeve is an OEM part for GE dryers. It is designed to support the rear of the dryer drum, ensuring smooth rotation during the drying cycle. This sleeve reduces friction between the drum and the bearing, contributing to efficient and quiet operation of the dryer. This is the dryer rear drum bearing sleeve only. For the rear drum bearing kit order WE25M40.

You should replace the rear drum bearing sleeve if it becomes worn out or damaged. Causes of a bad bearing sleeve can include regular wear and tear, lack of lubrication, or excessive loads that cause undue stress on the component. A malfunctioning bearing sleeve can lead to increased friction, noise, and potential damage to other parts of the dryer.

Symptoms of a bad rear drum bearing sleeve include:

Squeaking, grinding, or rumbling noises during the drying cycle
The dryer drum not rotating smoothly or being off-balance
Increased drying times due to inefficient drum movement
Visible wear or damage to the sleeve

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Noisy dryer drum vibrating and squeaking then screeching! Dan N. • Wytheville , VA • December 14, 2015

First symptoms were squeaking drum. This is probably when new glide strips might have been all that we needed. But I put off fixing it... and I put it off some more. Noises got louder, squeaking became screeching, then it started to vibrate loudly. The front drum bearing (really just a plastic arch that the drum rides on) had broken, and with the drum in a canted position, the rear bearing sleeve got messed up too. I ordered the front drum support bearing, and also a rear drum bearing... Read more

$15.95

Compare At:: $19.72
You Save:: $3.77

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Kenmore Drum Bearing

4.9 (80)

By: Frigidaire

Part Number: 131825900

The Dryer Drum Bearing is an OEM part for Frigidaire dryers. It supports the dryer drum, ensuring smooth rotation during the drying cycle. This part attaches to the inside of the rear panel of the cabinet, offering support to the dryer drum.

You should replace the drum bearing if it becomes worn out or damaged. Causes of a bad drum bearing can include normal wear and tear, overloading the dryer, or lack of lubrication.

Symptoms of a bad drum bearing include:

Loud squeaking or grinding noises during operation
The drum not turning smoothly or becoming misaligned
Increased friction causing overheating or burning smells
The dryer not tumbling clothes properly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Marks left on clothes
Noisy

Do-It-Yourself Stories from Customers like You Dryer would not turn on Kathie R. • Burlington , WI • January 15, 2016

The dryer is a Kenmore Laundry Center, model 417-99570150. Bought in 1998, so it is an older model. Not wanting to buy the newer ones that are out now. We opted to fix the Kenmore. Just believe the older models are worth fixing, if at all possible. Frist we had to figure out what parts we would need and if the cost would be worth our time. I went on YouTube: and type in Kenmore dryer not turning on. Watched several videos to narrow down the possible problem. Next step was to... Read more

$9.95

Compare At:: $11.94
You Save:: $1.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Kenmore Drum Glide

4.8 (71)

By: Frigidaire

Part Number: 137513300

The Drum Glide is an OEM part for Frigidaire dryers. It is designed to support the front of the dryer drum as it rotates, allowing the drum to turn smoothly with minimal friction and noise. This is a single glide. Your dryer uses two so it is recommended to replace both at the same time.

Causes of a bad drum glide can include wear and tear from regular use, excessive loads that put undue strain on the drum and its components, or accumulation of lint and debris that can interfere with the glide's movement.

Symptoms of a bad Drum Glide can include:

Unusual noises, such as screeching or squealing, during operation
Increased difficulty in turning the drum, leading to longer drying times or incomplete cycles
Visible wear or damage to the glide itself, indicating it is time for a replacement

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Do-It-Yourself Stories from Customers like You Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018

The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts. Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum... Read more

$24.95

Compare At:: $29.69
You Save:: $4.74

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore Bearing

4.8 (83)

By: Whirlpool

Part Number: WP22003441

The OEM Replacement is a bearing designed to function as the rear bearing in Whirlpool front-load washers. It also works as the upper brake bearing in top-load washers. Positioned near the tub's brake assembly, this component plays a significant role in the operation of the washer. In top-load washers, it resides above the brake assembly.

Causes of a bad bearing can include prolonged wear and tear, exposure to excessive loads, or water intrusion that leads to rust and corrosion. A compromised bearing can lead to more significant issues if not addressed promptly.

Symptoms of a bad bearing include:

Loud, unusual noises during the wash or spin cycles
Excessive vibration or movement of the washer
The drum not rotating smoothly or becoming stuck
Leaks around the drum area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Noisy spin cycle Gregory E. • Halifax , PA • April 17, 2017

I just wanted to put my experience here for all to see. I have a Maytag Neptune, MAH5500BWW, one of the original ones. I bought it back in 2002 and it has done many many loads of wash faithfully. So when the bearings started to get loud I thought it best to replace them, the seal kit and the belt. I did my research as best I could and decided to order the OEM parts from an appliance supplier. If you are replacing the bearings, watch on line videos prior to performing the job. It will... Read more

$17.95

Compare At:: $21.18
You Save:: $3.23

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Kenmore Rear Drum Support Shaft

4.9 (23)

By: Frigidaire

Part Number: 131777700

The Rear Drum Support Shaft is an OEM part for Frigidaire dryers, specifically designed to ensure the stability and smooth rotation of the dryer drum. This component plays a pivotal role in the dryer's operation by supporting the rear of the drum, allowing it to turn evenly and quietly during cycles. Note: The rear drum bearing kit is 5303281153.

The causes behind these issues often stem from normal wear and tear, excessive loads that strain the dryer's components, or lack of regular maintenance. Over time, the support shaft can wear down, become loose, or even corrode, leading to operational inefficiencies and potential damage to the dryer.

Symptoms of a failing Rear Drum Support Shaft include:

Unusual noises, such as thumping or squeaking, during operation
The dryer drum struggling to rotate or not rotating at all
Increased wear on other components, such as the belt or motor, due to improper drum alignment

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer would not turn on Kathie R. • Burlington , WI • January 15, 2016

$113.73

Compare At:: $136.48
You Save:: $22.75

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore Front Bearing And Seal Kit

4.8 (14)

By: Whirlpool

Part Number: 279264

The Front Bearing and Seal Kit is an OEM replacement part for Whirlpool dryers. This kit includes the front bearing and seal for the dryer drum, which work together to provide smooth operation and prevent premature wear.

Causes of a bad front bearing and seal can include regular wear and tear from normal use, heavy loads that place extra strain on the bearings, or debris accumulation causing increased friction.

Symptoms of issues include:

Noisy or grinding sounds coming from the drum area
Vibration noticed during the operation
Difficulty turning or rotating the dryer drum by hand
Reduced efficiency and longer drying times

This OEM replacement kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Noisy

Do-It-Yourself Stories from Customers like You Noisy & inefficient Richard M. • Indianapolis , IN • December 06, 2016

After having replaced the drum support rollers twice in a roughly 3yr period, I realized something wasn't quite right, and indeed it wasn't. I had been ordering the wrong parts - I did use the online parts locator after checking, & double checking my model number. Apparently my older Whirlpool dryer has a somewhat ambiguous model number because the rollers that were shipped each time looked nothing like the originals. I realize that is not particularily uncommon - manufacturers often modify... Read more

$59.95

Compare At:: $71.34
You Save:: $11.39

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Kenmore Ball

5.0 (5)

By: Frigidaire

Part Number: 5303281019

The Ball is an OEM part for Frigidaire dryers. This part helps the drum to rotate smoothly and evenly. It provides a stable and low-friction contact point, allowing the drum to turn efficiently during drying cycles. This is a drum-bearing ball only. For a complete drum bearing and shaft kit order 5303281153.

Causes of a bad ball can include regular wear and tear, friction from continuous drum rotation, or physical damage.

Symptoms of a bad dryer ball include:

Squeaking or grinding noises during operation
The drum not rotating smoothly or becoming unbalanced
Increased friction leading to higher energy consumption
Visible wear or damage to the ball

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer drum would not turn J Kent I. • Anderson , IN • February 22, 2019

I watched the helpful diy video. It gave me what the problem was and the confidence to do it. Took my dryer apart with the helpful hints in the video repair went smooth. Works like a dream and I saved money. Thank you appliance parts pros. Read more

$12.95

Compare At:: $15.28
You Save:: $2.33

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore Rear Drum Support Bearing

4.9 (33)

By: Ge

Part Number: WE3X75

Bearing only, to get complete assembly order WE25M40

Do-It-Yourself Stories from Customers like You Was making a squeaking/squealing on start up Gerald G. • Nashua , NH • March 20, 2016

My GE dryer from the late 80's/early 90's was squealing when it would start up, belt or bearing I was thinking. I found a manual online that covered my model and I watched a video on this site that showed me how to take it all apart, mine was a bit different but the principles were the same. I took it apart and added some quick-disconnects to 2 wires so next time I can take the front panel off easily. When I got to the bearing it looked worn but not bad so I cleaned it and put it back. ... Read more

$18.69

Compare At:: $22.05
You Save:: $3.36

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore Bearing Ring

4.5 (4)

By: Whirlpool

Part Number: WP3394509

This bearing ring is a small, low-friction spacer used in the dryer's drive system to let rotating components spin smoothly and quietly. Replacing a worn ring helps reduce drag, eliminate squeal, and protect related parts. What it does:

Provides a bearing surface between a rotating wheel/pulley and its bracket
Helps maintain smooth belt tracking and consistent tumble
Reduces friction and wear on the belt and pulley/roller
Common symptoms of wear: squealing/chirping while running, intermittent drum start, drag or burning-rubber smell

What's included:

1 bearing ring

Install notes:

Disconnect power; for gas dryers, also shut off gas supply
Access the drive system; release belt tension and remove the affected pulley/roller as required
Note the order/orientation of spacers, washers, and clips; install the new ring in the same position
Hand-rotate the assembly to ensure free movement before reassembly and testing

This part fixes the following symptoms

Noisy

Do-It-Yourself Stories from Customers like You Replace front drum bearing ring. Randy N. • Anoka , MN • January 18, 2020

New ring. Read more

$52.33

Compare At:: $62.27
You Save:: $9.94

IN STOCK

Ships Today Guaranteed

Add to Cart

Kenmore / Sears dryer replacement parts are essential for keeping your dryer running smoothly and efficiently. These parts play a crucial role in maintaining or restoring the functionality of your Kenmore / Sears dryer, ensuring that your laundry cycles are completed without any hiccups. Whether it's a heating element, a drum belt, or most importantly, a Kenmore / Sears dryer Bearing, these parts are vital in keeping your appliance in top shape.

Dryers are vital in our day-to-day lives, helping us get our clothes clean and dry in no time. The Kenmore / Sears dryer parts, especially the bearings, contribute significantly to the overall performance and lifespan of your dryer. Bearings are fundamental in allowing the drum to spin freely and with minimal friction, which leads to a quieter and more efficient operation. OEM replacement parts, including these bearings, guarantee the best fit and function because they are designed specifically for your model, ensuring the highest quality and compatibility.

You don't have to worry about the availability and quality of Kenmore / Sears dryer replacement parts. These parts are readily accessible and designed to meet rigorous standards, providing peace of mind that your dryer will continue to operate effectively for years to come.

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Kenmore / Sears Dryer Bearing Parts

Kenmore Dryer Front Bearing Drum Slide Green 2-Pack

Symptoms of bad dryer front bearing drum slides include:

Kenmore Dryer Drum Front Support Bearing

Kenmore Rear Drum Bearing Kit

Kenmore Rear Drum Bearing Kit

Kenmore Dryer Bearing Slide 2-Pack

Kenmore Dryer Bearing Slide 2-Pack

Symptoms of bad dryer bearing slides include:

Kenmore Bearing Ring For Front Support

Kenmore Rear Drum Bearing Sleeve

Kenmore Drum Bearing

Kenmore Drum Glide

Kenmore Bearing

Kenmore Rear Drum Support Shaft

Kenmore Front Bearing And Seal Kit

Kenmore Ball

Kenmore Rear Drum Support Bearing

Kenmore Bearing Ring

Common Problems