Kenmore / Sears Dryer Switch

Best Seller

Genuine Whirlpool part

Kenmore Dryer Door Switch

By: Whirlpool

Part Number: WP3406107

The Dryer Door Switch is an OEM replacement part for Whirlpool dryers. It is a crucial safety component that monitors the opening and closing of the dryer door, preventing the dryer from operating when the door is open.

Symptoms of a faulty Dryer Door Switch include:

The dryer failing to start or operate with the door closed
The dryer continuing to run or heat even when the door is open
Error codes or warning lights related to the door switch sensor

Causes of a bad door switch can include normal wear and tear over time, physical damage from mishandling or impact, or electrical malfunctions.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

This part fixes the following symptoms

Doesn't shut off
Won't start
Will not tumble

Do-It-Yourself Stories from Customers like You Ignitor coil was not turning on Harrison N. • El Cajon , CA • March 14, 2021

I realized my load of laundry was still wet after a normal drying cycle. My first action was to turn the dryer on (2010 gas Maytag centennial) and open the front port to look at the ignitor coil. It never turned orange so I knew there must be a problem with the primary circuit. I shut off the dryer, disconnected the power, pulled it away from the wall, shutoff the gas, and removed the back panel. I then disconnected the wires for the thermal fuse and checked its resistance with a multimeter.... Read more

$26.95

Compare At:: $31.80
You Save:: $4.85

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore Push-To-Start Switch

4.8 (46)

By: Ge

Part Number: WE4M416

The Dryer Push-to-Start Switch is an OEM replacement part for GE dryers. This component is responsible for initiating the drying cycle when pressed, serving as the primary control for starting the dryer's operation.

Symptoms of needing to replace the push-to-start switch include:

The dryer failing to start or begin the cycle when the switch is pressed
Intermittent or inconsistent starting issues
Visible damage or deterioration of the switch itself

Causes of a faulty push-to-start switch can include mechanical wear and tear over time, electrical malfunctions, or physical damage due to impact or mishandling.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dryer models.

Do-It-Yourself Stories from Customers like You Push start switch on ge dryer Michael S. • Carlsbad , CA • February 26, 2017

I was trying to troubleshot a problem I had with my GE dryer not starting. I went to AppliancePartsPros.com because they have excellent DYI videos on how to make repairs. I determined that the problem was in the push start switch. I ordered the switch online and it took 3 days to arrive. It took 5 minutes to replace the switch and the dryer works perfectly. Read more

$23.32

Compare At:: $27.75
You Save:: $4.43

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore Washer Lid Switch

4.9 (661)

By: Whirlpool

Part Number: 3949247V

The Washer Lid Switch is an OEM replacement part for Whirlpool washers. It is an electronic component located inside the washer lid that detects when the lid is open or closed in order to activate the necessary functions during the wash cycle.

Symptoms of a bad Washer Lid Switch include:

The wash cycle will not start even when the lid is closed
Error codes displayed related to the lid being open
Inability to advance through cycle selections
Flashes or other improper lid switch behavior

Causes of a bad lid switch can be normal wear and tear over time. Moisture exposure may also contribute to internal component failure.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Will not drain
Won't start
Will not fill with water
Lid or door will not open

Do-It-Yourself Stories from Customers like You Our washer wouldn't rinse spin or drain Jan C. • Somerville , MA • April 23, 2015

My son was doing his laundry, only to announce that the washer wouldn't rinse, spin or drain. I looked on line at new washers and was staggered to see how much they cost, our Whirlpool is 20 years old! Then I looked on Craig's list to see about getting a used washer, but when I found something that looked good, and looked up how it performed, most of them had terrible reviews. So, I looked at a video that told about the 5 most common things to go wrong and figured out it was a broken lid... Read more

$38.95

Compare At:: $46.35
You Save:: $7.40

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore Push To Start Switch

4.9 (42)

By: Whirlpool

Part Number: WPW10117655

The Push To Start Switch is an OEM part for Whirlpool dryers. It is the interface between the user and the dryer, initiating the drying cycle when pressed. This switch is essential for the safe and efficient operation of the dryer, ensuring that it starts only when the button is deliberately pressed, thereby preventing accidental start-ups.

Causes of a bad Push To Start Switch can include electrical failures within the switch mechanism, wear and tear from repeated use, or damage from spills or moisture exposure.

Symptoms of a bad Push To Start Switch include:

The dryer not starting when the button is pressed
The need to press the button multiple times to start the dryer
The dryer starting without the button being pressed

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer wouldn't start Kha L. • Reinholds , PA • December 20, 2015

The help tech helped me troubleshoot what the problem might be, and we narrowed it down to a faulty switch. He helped us pick the right part, and the video was helpful - it gave me the confidence that I could fix it myself. The part came, and it only took me 5 minutes to change out the switch. Now my dryer works great! I saved my wife $500 for a new dryer! :) Read more

$53.27

Compare At:: $63.39
You Save:: $10.12

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore Door Switch

4.9 (98)

By: Whirlpool

Part Number: W10820036

The Washer Door Switch is an OEM part for Whirlpool washing machines. This component is crucial for ensuring the washer operates safely by detecting whether the door is open or closed. The door switch prevents the washer from starting or continuing its cycle when the door is open, and it allows the machine to function only when the door is securely closed.

Symptoms of a failing Washer Door Switch include:

The washer not starting or stopping unexpectedly during a cycle
Error codes related to door closure issues displayed on the washer's control panel
The washer door not locking properly or the lock mechanism not engaging
The washer continuing to operate with the door open

Causes of a bad door switch can include wear and tear from frequent use, damage from repeated opening and closing of the door, electrical faults such as short circuits, or physical damage from mishandling or impact.

This OEM Whirlpool part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.

This part fixes the following symptoms

Will not drain
Pumps but will not spin
Timer will not advance
Doesn't shut off

Do-It-Yourself Stories from Customers like You Sometimes the washer wouldn't start the wash cycle when the fill cycle was done it would just sit until the lid was picked up or bumped Eugene N. • Roswell , NM • August 28, 2016

The lid shut-off switch is located behind the lid How About That. I order the plastic ball the hold the lid in place plus the lid shut off switch. I watched the video that AppliancePartsPros.com has on how to replace the lid and the plastic balls. I removed the lid to get to the two philips head screws to remove that part of the shut-off switch. I took the new switch out of the package and compared it to the old switch. I assembled the switch just like the old switch look using the new... Read more

$20.95

Compare At:: $32.43
You Save:: $11.48

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore Interlock Switch

4.9 (68)

By: Ge

Part Number: WD21X10261

The Interlock Switch is an OEM replacement part for GE electric and gas dryers. This safety component monitors the door closure, preventing operation if the door is not securely closed and latched. The switch measures 2 inches long and 1/2 inch wide.

Symptoms of a faulty interlock switch include:

Dryer failing to start or running with the door open
Timer display not illuminated when start button is pressed
Inability to open the dryer door during operation
Dryer suddenly stopping mid-cycle before fully drying clothes

Causes relate to the internal component contacting the door frame over 50,000 open/close cycles potentially exposing wiring to wear. Regular cleaning the external switch area prevents dust or lint buildup skewing performance.

This genuine GE switch is compatible with Hotpoint and RCA dryers as well.

Note: Can be used as a dishwasher door switch on specific models. Check your model number for the most accurate results.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Melted door switch. Christopher K. • Greeneville , TN • February 03, 2024

The full story: Dishwasher stopped running mid-cycle. When I first began troubleshooting I tried manually advancing the timer knob, and the machine would run. That led me to believe that the actual timer assembly was bad, so I replaced it. The dishwasher ran fine for a day, and then the same problem came back. This time, however, I also had to push in on the door to get it to run. I looked around online, and someone suggested that the door latch wasn't closing tightly enough. I adjusted the... Read more

$18.22

Compare At:: $21.50
You Save:: $3.28

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore Dryer Door Switch Assembly

4.9 (159)

By: Whirlpool

Part Number: WP3406105

The Dryer Door Switch Assembly is an OEM part for Whirlpool dryers. This component is responsible for detecting when the dryer door is open to prevent the dryer from operating during this state. It ensures safety and energy efficiency by halting the drying cycle if the door is accidentally opened, preventing heat loss and potential hazards.

Causes for a malfunctioning dryer door switch assembly include physical damage from slamming the dryer door, wear and tear from regular use, or electrical issues that impair its function.

Symptoms of a bad Dryer Door Switch Assembly include:

Dryer not starting when the door is closed
Dryer continuing to operate when the door is opened
The dryer starting intermittently or requiring the door to be slammed to start

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Doesn't shut off

Do-It-Yourself Stories from Customers like You Roper dryer stops working then heater runs in all cycles including no heat Eric L. • Hendersonville , TN • January 12, 2015

Background: Roper Electric Dryer model REX6634RQ0 purchased new in early 2006 by my wife. Dryer use profile is low to moderate as it was used by only one person (working from home) from 2006 to late 2007 then moved and stored in a dry basement until mid 2009. Moved and used by primarily just two people (plus occasional children visits) from mid-2009 thru late 2011 with three moves involved with in that time. Then stored in a dry shipping container until moved again in 2013. The multiple... Read more

$26.95

Compare At:: $31.80
You Save:: $4.85

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore Dryer Push To Start Switch

4.9 (58)

By: Whirlpool

Part Number: WP3977456

The Push to Start Switch is an OEM part for Whirlpool dryers. It is responsible for initiating the drying cycle when pressed, sending an electrical signal to start the dryer.

You should replace this push to start switch if it becomes defective. Causes of a bad switch can include electrical failures, physical damage from repeated use, or internal wear over time.

Symptoms of a bad push to start switch include:

The dryer not starting when the button is pressed
The need to press the button multiple times to start the dryer
No response or clicking sound when the button is pressed

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: For square top push to start switch, use part number W10156101.

Do-It-Yourself Stories from Customers like You Push button start as soon as you let go of button dryer would stop Richard S. • Poultney , VT • February 27, 2016

Replaced the duct tape with a new switch Read more

$28.26

Compare At:: $33.91
You Save:: $5.65

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore Door Switch

4.9 (46)

By: Ge

Part Number: WE4M415

The Door Switch is an OEM part for GE dryers, designed to ensure the dryer does not operate when the door is open. This safety feature is crucial for preventing accidents and ensuring the appliance operates efficiently and safely. The switch signals the dryer's control system about the status of the door—if it's open or closed—thereby allowing or preventing the start of a drying cycle.

Causes of damage to the door switch often include mechanical wear from repeated use, accidental damage from loading or unloading, or electrical issues such as short circuits.

Symptoms of a bad Door Switch include:

The dryer not starting when the door is closed
The dryer continuing to run when the door is opened
Unusual noises or the dryer stopping mid-cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Doesn't shut off
Won't start

Do-It-Yourself Stories from Customers like You Push start switch on ge dryer Michael S. • Carlsbad , CA • February 26, 2017

$23.38

Compare At:: $30.08
You Save:: $6.70

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Kenmore Turn Start Switch

4.9 (96)

By: Frigidaire

Part Number: 134398300

The Turn Start Switch is an OEM part for Frigidaire dryers. It is responsible for initiating the drying cycle when the switch is turned. This switch is a critical component that engages the dryer’s motor and starts the drying process, ensuring your clothes are dried effectively.

You should replace the turn start switch if it becomes faulty or unresponsive. Causes of a bad start switch can include regular wear and tear from frequent use, electrical issues, or damage due to excessive force or mishandling.

Symptoms of a bad turn start switch include:

Dryer not starting when the switch is turned
Intermittent starting issues
The switch feeling loose or not engaging properly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Knob broke on dryer started using pliers to turn it on eventually the stem broke off the start switch Lisa I. • Cocoa , FL • December 13, 2015

Got the model number off the dryer. Looked it up online. I wanted name brand replacement part. Found this wonderful AppliancePartsPros.com. Looked up my model number, went to top control panel section, ordered the Start Switch. In ONE DAY I received it. Removed the back part of my dryer. Easily removed the broken part. (I did watch a video online). Put on the new Start Switch. Instead of ordering a new knob. I removed a knob from the dryer that I don't use. It turns a buzzer on or off to let... Read more

$59.95

Compare At:: $71.34
You Save:: $11.39

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore Start Switch

4.8 (37)

By: Whirlpool

Part Number: WP3398095

The Start Switch is an OEM part for Whirlpool dryers. This switch initiates the dryer's cycle, signaling the dryer to begin its drying process. Made with precision to fit specific Whirlpool models, this start switch ensures reliability and performance. Over time, wear and tear or electrical issues can impact the switch's functionality, leading to potential problems with starting the dryer.

Causes of a bad start switch can range from electrical faults within the switch itself, wear and tear from repeated use, or physical damage that affects the switch mechanism.

Symptoms of a bad Start Switch include:

The dryer not starting when the start button is pressed
Intermittent operation or failure to maintain the cycle once started
Unusual noises when the start button is pressed

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Clothes dryer woundnt start start switcw n/g John S. • Cutchogue , NY • May 17, 2014

Remove and replace Read more

$59.95

Compare At:: $71.34
You Save:: $11.39

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Samsung part

Kenmore Dryer Door Switch

4.9 (25)

By: Samsung

Part Number: DC64-00828B

The Dryer Door Switch is an essential component for maintaining the functionality of your Samsung dryer. This genuine OEM part ensures reliable performance by accurately detecting when the dryer door is open or closed, allowing the appliance to operate safely and efficiently. Designed specifically for Samsung dryers, it guarantees a perfect fit and seamless integration with your existing setup. Installing this door switch can help prevent overheating and ensure that your dryer cycles run smoothly, enhancing the overall lifespan of your appliance. By choosing this genuine OEM part, you benefit from high quality and durability, giving you peace of mind that your dryer will continue to perform at its best. Whether you're replacing a faulty switch or upgrading your dryerGÇÖs components, the Dryer Door Switch offers a dependable solution to keep your laundry routine uninterrupted and efficient.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You I accidentally stepped on the door of my Samsung dryer. The door is intact but brackets bent. Margaret C. • Tampa , FL • June 07, 2018

I am so blessed. I went online. Found the brackets. Watch the video for the brackets I chose. And lucky me. I did not have to pull the dishwasher out. The installer did not have it flush under the counter. So I was able to pull the dishwasher forward unhook the damage brackets and insert the new. Put the dishwasher back in. Two screws. Now the balanced and secure dishwasher washes better than ever and I did not have to pay an extraordinary fee for a repairman. I'm 68 and take care of a 72 year... Read more

$50.95

Compare At:: $60.63
You Save:: $9.68

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore Door Switch

4.9 (13)

By: Whirlpool

Part Number: WPW10237959

The Door Switch is an OEM part for Whirlpool dryers, designed to ensure the appliance operates safely by detecting whether the dryer door is open or closed. This switch plays a crucial role in the dryer's operation, as it prevents the dryer from running when the door is not securely latched, thereby ensuring safety during its use.

The primary reasons for replacing the Door Switch often involve wear and tear from regular use, damage from an overloaded door, or accidental impacts that compromise the switch's integrity.

Symptoms for a replacement Door Switch include:

The dryer not starting or operating when the door is closed
The dryer continuing to run when the door is opened
Unusual noises or the appliance starting and stopping abruptly, which may indicate a faulty connection

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Door switch on dryer stopped working. David S. • Rockmart , GA • May 12, 2018

Went on YouTube and found out how to replace switch. Had it replaced in no time. Read more

$42.95

Compare At:: $51.11
You Save:: $8.16

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore Switch-Pts

5.0 (2)

By: Whirlpool

Part Number: WPW10446920

The Push-to-Start Switch is an OEM replacement part for Whirlpool dryers. This component is the button you press to initiate the drying cycle. Once pressed, the switch sends an electrical signal to the dryer's motor, activating the machine and beginning the drying process.

Causes for a malfunctioning Push-to-Start Switch can include electrical issues, wear and tear from frequent use, or damage due to mishandling or accidental impact.

Symptoms of a bad Push-to-Start Switch include:

Dryer not starting despite pressing the button
The need to press the button multiple times for activation
Intermittent starting and stopping of the dryer
Unusual sounds when pressing the switch

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer would not run after we turned it on. Dana H. • Orlando , FL • September 01, 2017

Replaced start switch. Read more

$58.95

Compare At:: $69.56
You Save:: $10.61

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore Start Switch

5.0 (18)

By: Whirlpool

Part Number: WP3404233

The Start Switch is an OEM part for Whirlpool dryers. This switch is essential for initiating the drying cycle, allowing the user to start the dryer by pressing the button. It ensures the dryer begins operation and runs through the selected cycle properly.

Causes of a bad start switch can include electrical issues such as short circuits, mechanical wear from frequent use, or damage due to moisture or impact.

Symptoms of a bad start switch include:

The dryer not starting when the button is pressed
Intermittent operation or the need to press the button multiple times to start the dryer
No response or sound when the start button is engaged
The start button feeling loose or not clicking properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Timer & start switch had failed on my whirlpool dryer Richard H. • Davenport , FL • November 07, 2014

Identified the parts I needed on the AppliancePartsPros.com website using the Dryer model number. Delivery was within 3 days by courier - excellent. Parts fitted, console reassembled and my dryer was back up and running within 40 minutes. No more intermittent problems with the timer not working - brilliant!! Read more

$48.95

Compare At:: $58.25
You Save:: $9.30

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore Door Switch

4.8 (14)

By: Whirlpool

Part Number: WP3406108

The Door Switch is an OEM part for Whirlpool dryers. It is responsible for detecting whether the dryer door is open or closed. When the door is closed, the switch allows the dryer to operate. Conversely, if the door is open, the switch interrupts the electrical circuit to prevent the dryer from running, ensuring safety during use.

You should replace the door switch if it becomes faulty. Causes of a bad door switch can include wear and tear from regular use, electrical failures, or physical damage from repeated opening and closing of the dryer door. A malfunctioning door switch can prevent the dryer from starting or cause it to stop mid-cycle.

Symptoms of a bad door switch include:

The dryer not starting or responding when the door is closed
The dryer stopping mid-cycle without reopening the door
The dryer continuing to run when the door is opened
Error codes related to the door switch or door lock mechanism

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Broken door switch and lint filter cover Christopher W. • Collierville , TN • December 14, 2014

Plug and play minus a few screws to remove, simple repair. Read more

$33.46

Compare At:: $40.15
You Save:: $6.69

IN STOCK

Ships Today Guaranteed

Add to Cart

Access to quality Kenmore / Sears dryer switches is crucial for keeping your appliance in top working condition. These dryers are essential for smooth household operations, and the right parts ensure they function efficiently for years to come.

Kenmore and Sears dryer switches are vital components that impact your appliance's performance. Whether starting the drying cycle or ensuring safety features function correctly, these switches must be in premium working order. Using OEM replacement parts specifically designed for your model guarantees the quality and compatibility that generic parts might lack, reducing the inconvenience of frequent issues and enhancing the longevity of your dryer.

Incorporating reliable Kenmore dryer switches into your maintenance routines can effortlessly restore your appliance's optimal functionality. OEM switches meet stringent standards, making them a dependable choice for anyone looking to keep their dryer running smoothly. High-quality parts are readily available for your repair needs, providing peace of mind.

So, next time you need a Kenmore or Sears dryer switch, remember the importance of using top-notch, compatible parts. Investing in these quality components ensures your dryer remains an indispensable and reliable part of your home without a hitch.

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Kenmore / Sears Dryer Switch

Kenmore Dryer Door Switch

Kenmore Push-To-Start Switch

Kenmore Washer Lid Switch

Kenmore Push To Start Switch

Kenmore Door Switch

Kenmore Interlock Switch

Kenmore Dryer Door Switch Assembly

Kenmore Dryer Push To Start Switch

Kenmore Door Switch

Kenmore Turn Start Switch

Kenmore Start Switch

Kenmore Dryer Door Switch

Kenmore Door Switch

Kenmore Switch-Pts

Kenmore Start Switch

Kenmore Door Switch

Common Problems