Kenmore / Sears Dryer Cap Or Cover

I replaced the warped cover guide and the lint filter. Now it works perfect! Sears was going to charge $100 just to diagnose the well known problem, not including parts and labor. It only requires 4 screws(i used the old ones). Easy fix. Read more

I have order three parts, guide filter, cover guide, and sensor assembly. My previous cover guide was from two parts, when sensor assembly was one of them. New part ( guide cover ) was all in one piece so I just transfer old metal part of sensor to new cover guide and I don't need that sensor assembly anymore. I have ordered all three parts overnight by Fedex, ordered 15 min before 5pm, so next day it was here. Dryer is fixed, I'm happy. Read more

This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more

Ordered a new filter and filter holder Read more

The dryer is 10 years old. I replaced all 4 roller wheels. While I had it apart I also replaced the drive belt and the idler pulley assembly. Once I had it apart I did find 2 wheels that were very worn, (1 front, 1 back) which is what I believe the problem was as they were also very hard to spin. Dryer works like new now. The repair video was VERY helpful. Read more

The original issue with the dryer is that a corner of the lint screen was sticking out of the lint screen guide, and it would not stay flush with the guide. As a result, many tank top straps, waistband strings, and blankets would get caught on this corner and twist, tear, or warp my clothes. When I did my research on the issue, I kept reading that it was an issue with the lint screen that came with the dryer. So I ordered the lint screen, guide, and cover that appliance part pros recommends to... Read more

I referenced the repair video. Very straightforward and easy. Only need 3 tools: 1/4 and 5/16 nut drivers and Philips head screwdriver. About 15 minute job. Surprising how much lint and dust build up inside the chassis, was able to clean that out too. Read more

Ordered new valve. Easy installation. Saved a service call charge (-; Read more

Was an easy fix with the new part and instructions. Read more

There is no good diagram explaining how exactly these fit in. I had to do trial and error. The parts are quite delicate so I actually broke one trying to get it in. I would recommend ordering an extra or two. These need springs tonfit correctly. Luckily I saved the old ones...if you don't have them, it won't work. Unscrew the two screws on outside and two inside. You don't have to take whole thing out, just loosen. Look carefully and you can see the two little holes in the plastic where... Read more

I drilled old lock out and installed new lock box. This was the info your Tech had given me and as always your Techs are on top of all situations. This took about 15 minutes and it's back collecting money. Thanks for such quick and reliable service. The tracking info was a big help , keeping GM advised as to final repair , knowing when part would arrive. I again want to thank you for your reliable service and keeping me aware of where my part was and when I can install. Read more

Removed old lint filter cover. Inserted spring on one end of lint cover and installed cover. Read more

Took off the freezer door, took off the top hinge on the refrigerator door, replaced the handle, re-installed the top hinge and the freezer door. This is a two person job - one to remove the top hinge and replace the handle, while a second person holds the refrigerator door in place. Replacing the handle was easy. The most irritating part was figuring out what parts to order. The drawing of the refrigerator door (Drawing # 4) used to figure out what parts to order was not clear. I paid $8... Read more

Open dryer door. Remove four Phillip head screws that hold lint assembly together. Two inside and two on the outside. There is also a hex head screw behind the front panel. To get at it I removed the four hex heads at bottom of front panel and four star head screws on left side of front panel. I was able to get at it by pulling the front panel out as much as possible and and reaching from the side with small quarter inch socket. Remove lint assembly, vacuum out everything and replace with new... Read more