Kenmore / Sears Range Heating Element

Best Seller

Genuine Whirlpool part

Kenmore Oven Bake Element

By: Whirlpool

Part Number: 326791

The Oven Bake Element is an OEM part for Whirlpool ovens. This crucial component is located at the bottom of the oven cavity and is responsible for providing the heat needed for baking. The bake element converts electrical energy into heat, which is then distributed throughout the oven to cook food evenly.

Common causes of a bad bake element include excessive use, accidental damage during cleaning, or a power surge that can burn out the element.

Symptoms of a bad Oven Bake Element include:

The oven not heating up to the set temperature.
Visible damage to the element, such as blistering, cracks, or breaks.
Lack of heat when the oven is turned on
An increase in cooking times

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Oven not heating evenly
Little to no heat when baking
Element will not heat

Do-It-Yourself Stories from Customers like You Bottom coil of oven was not heating Charles W. • Suffolk , VA • February 04, 2017

I googled the model number of the oven and came across AppliancePartsPros.com The coil along with replacing video was right at hand. I ordered the part, got it three days later (standard shipping) and installed it. To sum it up, it was a five minute job. Read more

$57.95

Compare At:: $68.96
You Save:: $11.01

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore Oven Bake Element

4.9 (147)

By: Ge

Part Number: WB44K5013

The Oven Bake Element is an OEM part for GE ovens. This component is located at the bottom of the oven cavity and is responsible for generating the heat needed for baking. By converting electrical energy into heat, the bake element ensures even temperature distribution throughout the oven, allowing for consistent cooking results.

Causes of a malfunctioning Oven Bake Element may involve visible signs of wear or damage, like blistering or holes, a break in the element that hinders proper heating, and burnout or malfunctioning resulting from age or excessive use.

Symptoms of a failing Oven Bake Element include:

The oven not heating to the set temperature
Uneven baking results
No visible glow from the element when the oven is turned on
The oven taking longer than usual to preheat

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when baking
Oven not heating evenly

Do-It-Yourself Stories from Customers like You Lower oven bake heating element was broken in half Richard P. • Colleyville , TX • September 19, 2014

Watched the appliancepartspro video and changed it out. It took about 15 minutes. I'm sure I saved hundreds. Read more

$63.95

Compare At:: $76.10
You Save:: $12.15

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore 8 Inch Large Surface Element

5.0 (185)

By: Whirlpool

Part Number: WP660533

The 8-inch large Surface Element is an OEM replacement part for Whirlpool induction ranges. It serves as an integral independent heating zone to boil, sauté or simmer large pots quickly.

Symptoms of a bad surface element include:

Inability to power on or heat evenly across the surface
Slow inconsistent heating or hot/cold zones developing
Parts of the coil visibly cracked or disconnected
Tripped circuit breakers upon heat-up that don't reset

Causes stem from normal thermal stress fatigue of coiled elements exceeding thousands of temperature cycles daily. Continuous high wattage energy may cause microscopic metal deterioration developing over a decade plus of use.

This genuine Whirlpool replacement part is compatible with Kenmore, Roper and Jenn-Air ranges.

For matching 6-inch element order WP660532.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You The burners on my drop in stove would not work the connections and the surface elements were in bad shape Luise C. • Worth , MO • November 23, 2014

I lucked out my nephew was here to deer hunt and he helped me. I do believe I could have done it on my own but was more confident with his help. I will say the videos did help. Read more

$35.54

Compare At:: $53.59
You Save:: $18.05

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore 8 Inch Large Surface Element

4.9 (119)

By: Ge

Part Number: WB30M2

The 8 Inch Large Surface Element is an OEM part for GE ranges and cooktops. This heating element is used on the cooktop to provide a consistent heat source for cooking. It fits into the designated spot on the stove and connects to the electrical system, allowing users to control the temperature for various cooking needs.

Causes of a bad surface element can include wear and tear from frequent use, electrical malfunctions, or damage from spills and food debris. Overheating or accidental impacts can also impair its functionality.

Symptoms of a bad 8 Inch Large Surface Element include:

The element not heating up
Uneven heating or hot spots on the element
Sparks or electrical noises when the element is in use
Visible damage or burns on the element

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You Old and scarred burners and pans Kirk W. • Indianapolis , IN • March 22, 2015

Burners were an exact match for the originals and the pans fit perfectly. Vastly improved the appearance of an old cook top and allowed us to to not have to replace it before our home goes up for sale. Read more

$51.95

Compare At:: $77.98
You Save:: $26.03

IN STOCK

Ships Today Guaranteed

Add to Cart

Do you need help?

Get Questions Answered Instantly.

1-877-477-7278 Online

Live Help

Best Seller

Genuine Frigidaire part

Kenmore Range Surface Element

5.0 (151)

By: Frigidaire

Part Number: 316442300

The Range Surface Element is an OEM replacement part for Frigidaire electric ranges. It is a crucial component that generates heat for cooking on the stovetop surface.

Symptoms of a bad range surface element include:

Uneven or insufficient heating of cookware
Element failing to heat up or taking an excessive amount of time to reach the desired temperature
Visible signs of damage, such as cracks or warping on the element's surface
Unusual smells or noises coming from the element during use

Causes of a bad surface element can range from electrical malfunctions to physical damage caused by impact or exposure to excessive heat over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Won't start
Element will not heat

Do-It-Yourself Stories from Customers like You My stove is really old one of my elements started splitting & my drip pans were rusty Juli R. • Dickinson , TX • September 19, 2014

My old White Westinghouse stove has easy replacement of the elements & drip pans. They literally pop in & out with no effort or education necessary. Read more

$46.74

Compare At:: $55.15
You Save:: $8.41

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Kenmore Bake Element

5.0 (56)

By: Frigidaire

Part Number: 318254906

The Bake Element is an OEM part for Frigidaire ovens. It is responsible for providing the necessary heat for baking by converting electrical energy into heat within the oven cavity, ensuring even and consistent cooking results. It measures 19-1/2" wide, 15" long, and has 3-1/2" inserts, with a rating of 3400 watts and 240 volts.

Causes of a bad bake element can include normal wear and tear over time, damage from high temperatures, or electrical malfunctions that cause the element to short out or break.

Symptoms of a bad bake element include:

Uneven baking results
The oven not reaching the desired temperature
Visible damage or breakage on the element
The element not glowing red when in use

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Little to no heat when baking

Do-It-Yourself Stories from Customers like You Broken Newton W. • Austin , TX • August 23, 2016

With my tools Read more

$153.95

Compare At:: $184.74
You Save:: $30.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore Bake Element

4.9 (83)

By: Ge

Part Number: WB44T10018

The Bake Element is an OEM replacement part for GE ranges. It is a crucial component responsible for generating the intense heat necessary for baking and roasting in the oven cavity.

Causes of a bad bake element can include mechanical failure, electrical malfunctions, or simply reaching the end of its lifespan due to repeated heating and cooling cycles.

Symptoms of a bad bake element include:

Oven not heating up properly or failing to reach the set temperature
Uneven heating or hot spots within the oven cavity
Visible damage or breaks in the element coil
Unusual smells or burning odors emanating from the oven

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore oven models.

This part fixes the following symptoms

Little to no heat when baking
Element will not heat

Do-It-Yourself Stories from Customers like You The self cleaning feature of my ge double oven hasn't worked in years and recently the upper oven baking element stopped working Robert A. • Enfield , CT • October 19, 2015

I wanted to get the upper oven baking element replaced; it hasn't been working for a few months. This double oven has had two other issues, there is a fan that comes on to cool the electronics panel, That fan has made excessive noise and it operates for 2-3 hours after the oven turns off. The other problem with the oven is the Self-Cleaning feature runs for about 15-30 minutes and then turns off with an error code. I've had a local appliance repair person in to address the error code and... Read more

$93.95

Compare At:: $112.74
You Save:: $18.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore Oven Broil Element

4.9 (89)

By: Ge

Part Number: WB44K5009

The Broil Element is an OEM part for GE ovens. This element is located at the top of the oven and is crucial for the broiling function, providing high heat for cooking dishes such as meats and vegetables directly under the heat source. The broil element glows red hot when in use, creating the necessary temperature to sear food and lock in flavors.

Symptoms of a failing Broil Element include:

The element not heating up when the broil setting is activated
Uneven cooking or lack of browning on food intended to be broiled
Visible damage to the element, such as blistering, bubbling, or breaks in the element coil
No visible glow from the element during operation

Causes of a bad broil element often involve burnout from regular use, electrical issues such as faulty wiring or a malfunctioning thermostat that doesn't cycle the heat correctly.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling
Element will not heat

Do-It-Yourself Stories from Customers like You Broil element burned out Tommie S. • Greensboro , NC • June 12, 2014

Once I received the element within three days, I simply removed the other element by unclipping and unplugging lugs in rear. Placed the new one in clips and connected lugs and all was good! Read more

$66.95

Compare At:: $79.67
You Save:: $12.72

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore Oven Broil Element

4.9 (100)

By: Ge

Part Number: WB44T10009

The Oven Broil Element is an OEM part for GE ovens. This element is located at the top of the oven cavity and is responsible for broiling, providing high heat for cooking tasks such as searing meats or browning the top of dishes.

Causes of a bad Oven Broil Element can include prolonged use, leading to eventual wear and tear, exposure to food spills and grease that can corrode or damage the element, and electrical issues that may cause it to fail prematurely.

Symptoms of a malfunctioning Oven Broil Element include:

The element not glowing red when the broil function is activated
Uneven cooking or browning of food
The oven taking longer than usual to broil
No heat production when the broil setting is selected

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Little to no heat when broiling

Do-It-Yourself Stories from Customers like You Bake unit cracked and started glowing and sparking like the sun both elements replaced Steven S. • Somerset , KY • April 21, 2015

Easy fix. Both elements replaced while I was at it, so all new. Figured if one went the other was going to follow. CIRCUIT BREAKER OFF. Removed the back metal panel with my nut driver for the hex head screws. Note where the panel may slip under tabs for support. Remove slip on electrical connections on upper and lower elements. May need a pliers. (I did not want to just pull the element and the wires into the oven with the element and remove them there, like a technician would do. After 15... Read more

$54.36

Compare At:: $86.47
You Save:: $32.11

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore Bake Element Kit

5.0 (101)

By: Whirlpool

Part Number: WPY04000066

The Range Element Kit is an OEM part for Whirlpool ranges. This kit typically includes elements used for heating the oven or stovetop, ensuring efficient and even cooking or baking. The element measures 16" wide and 16" from the mounting plate to the other side. The terminal depth is 3", and the total element length is 19". It is rated at 2100 watts and 240 Volts.

Over time, heating elements can become worn out or damaged due to repeated use, exposure to high temperatures, or electrical issues. A malfunctioning element can lead to uneven cooking, longer cooking times, or the range not heating up at all.

Symptoms of a bad Range Element include:

The element not heating up
Uneven cooking or baking results
Visible damage such as burns or breaks in the element
Sparks or electrical issues when the element is turned on

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Oven not heating evenly
Little to no heat when baking
Element will not heat

Do-It-Yourself Stories from Customers like You Oven heating element burned out. Andrew M. • Odessa , MO • February 06, 2021

The top part of our double wall oven quit working a couple years ago. We asked an appliance repair guy if he could find a replacement heating element and after a few days, he told us he couldn't. We switched to using the bottom and recently I started looking to purchase a new oven. On a whim, I decided to check the Interwebs and found several sites claiming to have the part that the appliance repair guy said didn't exist. I ordered from Appliance Parts Pros and a few days later the... Read more

$46.95

Compare At:: $66.32
You Save:: $19.37

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Kenmore 6 Inch Small Surface Element

4.9 (83)

By: Ge

Part Number: WB30M1

The 6-Inch Small Surface Element is an OEM part for GE cooktops and ranges. It is designed to provide consistent and reliable heat for cooking on the stovetop. This heating element fits into the designated slot on the cooktop and is used for preparing smaller dishes or for simmering.

You should replace the surface element if it becomes faulty. Causes of a bad surface element can include wear and tear from regular use, electrical issues, or damage from overheating. A malfunctioning surface element can lead to uneven cooking, insufficient heat, or the element not heating up at all.

Symptoms of a bad 6-inch small surface element include:

The element not heating up or only heating intermittently
Visible damage such as burn marks or deformation
Uneven heating or hotspots on cookware
The element not fitting securely into its slot

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Matching 8-inch surface element - WB30M2; terminal block - WB17X5113

Do-It-Yourself Stories from Customers like You Old and scarred burners and pans Kirk W. • Indianapolis , IN • March 22, 2015

$39.63

Compare At:: $61.80
You Save:: $22.17

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Kenmore Dual Element

4.7 (44)

By: Frigidaire

Part Number: 316555800

The Dual Element is an OEM part for Frigidaire ranges. This element features two heating zones, allowing for versatile cooking options by providing both high and low heat settings on the same burner. It ensures efficient and consistent heating, making it ideal for various cooking tasks. It contains a 9-inch, 1200-watt element and a 6-inch, 1300-watt element, combining for 2500 watts at 240 volts

Causes of a bad dual element can include electrical issues, wear and tear from regular use, or physical damage such as cracks or breaks in the heating element. These issues can lead to inconsistent heating or complete failure of the element.

Symptoms of a bad dual element include:

Burner not heating up
Inconsistent or uneven heating
Element not switching between high and low heat
Visible damage to the element

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You The outer ring of the front left element would heat but the inner would not Larry G. • Flintstone , GA • December 17, 2019

Replacement of the element was relatively straightforward, but there are a couple of things to be aware of before you begin. First, turn off power to the stove at the breaker box. Allow the cooktop to raise by removing the two screws that secures it on the underside of the front edge. Open the oven door to do this. Removal of the old element is simple, just remove the two screws that secure the wide mounting bracket that holds the two front elements. Carefully turn the assembly over. To... Read more

$130.95

Compare At:: $154.52
You Save:: $23.57

IN STOCK

Ships Today Guaranteed

Add to Cart

Shop With Confidence

Over 15 million customers served!

365-Day Returns

Hassle-free Returns

Fast Delivery

1.7 Days on Average!

Free Tech Support

On all purchased parts!

Best Seller

Genuine Frigidaire part

Kenmore Oven Baking Element

4.9 (51)

By: Frigidaire

Part Number: 316225001

The Oven Baking Element is an OEM part for Frigidaire ovens. It is responsible for providing the necessary heat for baking and roasting by converting electrical energy into heat within the oven cavity. The baking element measures approximately 19.4 x 18.5 inches.

You should replace this baking element if it stops functioning properly, which can occur due to wear and tear over time, electrical malfunctions, or physical damage to the element.

Symptoms of a bad oven baking element include:

The oven not heating up properly or at all
Uneven baking or roasting results
Visible damage such as breaks or burn marks on the element

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Little to no heat when baking

Do-It-Yourself Stories from Customers like You Broken element Ted C. • Gloucester , MA • May 09, 2014

Replaced with new Read more

$120.95

Compare At:: $143.93
You Save:: $22.98

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kenmore 6 Inch Small Surface Element

4.9 (130)

By: Whirlpool

Part Number: WP660532

The 6 Inch Small Surface Element is an OEM part for Whirlpool electric ranges and cooktops. This component is essential for providing consistent, controlled heat to cookware on the stovetop.

Symptoms of a bad 6 Inch Small Surface Element include:

Lack of heat production, with the element failing to warm up at all.
Inconsistent heating, where the element may fluctuate in temperature or only partially heat.
Visible damage such as blistering, bubbling, or cracks on the element's surface.
A tripped circuit breaker when the element is turned on, indicating a short.

Causes of a bad surface element can include prolonged use leading to element burnout, electrical faults such as faulty wiring or internal failures, and physical damage from impact or heavy cookware being dropped on the element.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

8-inch element is part number WP660533.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You Our range needed 4 new range top elements due to wear Dale D. • Orlando , FL • December 05, 2014

Personally I have experience working with electricity and knowing if I bought the part required this would be an easy fix. I got my model number and contacted Appliance Parts Pros and placed my order for the new elements, terminal blocks, and for appearance purposes 4 new Drip Pans. Excellent service and quick shipping. I ordered my parts on Sunday and received them on Tuesday. This was a simple repair that only required a screwdriver to remove the old terminal block from the range hood, wire... Read more

$28.25

Compare At:: $44.73
You Save:: $16.48

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Kenmore Dual Element

4.9 (36)

By: Frigidaire

Part Number: 5304533520

The Dual Element is an OEM replacement part for Frigidaire electric ranges. This component is located on the cooktop surface and features two heating coils in one unit, one measuring 6 inches in diameter and the other 9 inches. It allows for precise control of cooking temperatures, accommodating various pot and pan sizes for more efficient cooking.

Causes of a bad dual element can include prolonged use that leads to wear and tear, electrical surges that can damage the heating element, or physical damage due to impact or mishandling. Over time, these issues can result in the element failing to heat properly or not working at all.

Symptoms of a bad dual element include:

The element not heating up or only partially heating
Inconsistent or fluctuating temperatures
Visible damage, such as burns or breaks in the element
The element not responding to temperature controls
Sparking or unusual noises when the element is in use

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Left front burner center coil did not work Jack P. • Leesburg , FL • September 12, 2016

We are very inexperienced appliance repair people. Thus check it out first to see if we can fixit...successs. First checked to be sure it wasn't the actual switch. Did this by numbering the wires and then switching the two switches b/w the right and left front dual burners. Success, the switch was fine but kinda disappointed cause this part was less expensive. Proceeded to then order the left front dual burner. Arrived in a few days, packed well. We unplugged the appliance, as it been a... Read more

$67.95

Compare At:: $80.18
You Save:: $12.23

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Kenmore Oven Broil Element

4.7 (37)

By: Frigidaire

Part Number: 316203200

The Broil Element is an OEM replacement part for Frigidaire ovens. It is located at the top of the oven cavity and is responsible for providing the high heat required for broiling. This element heats up quickly and evenly to cook food from above, giving it a crisp and browned finish.

Over time, the broil element can degrade due to the high temperatures it operates under, as well as normal wear and tear from repeated use. Electrical surges or physical damage from cleaning or moving oven racks can also cause the element to fail. These factors can lead to the element no longer heating up properly or becoming completely non-functional.

Symptoms of a bad broil element include:

The broiler not heating up or heating unevenly
Visible signs of damage such as burns, blisters, or breaks in the element
Sparking or unusual noises when attempting to use the broiler
The oven taking longer to broil food or not achieving the desired browning effect
The element not glowing red-hot during operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Oven wouldn't heat up Danielle B. • Virginia Beach , VA • March 17, 2015

Removed the bake element and broil element. Tested them with a multi meter. They failed. Ordered new elements. Received them in 2 days. Installed new elements. Oven works great. Entire fix took 10 minutes to remove and test elements, 10 minutes to install the new elements. It was my first time working on an appliance, the instruction videos were great! Read more

$117.95

Compare At:: $140.36
You Save:: $22.41

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Kenmore / Sears Range Heating Element

Kenmore Oven Bake Element

Kenmore Oven Bake Element

Kenmore 8 Inch Large Surface Element

Kenmore 8 Inch Large Surface Element

Kenmore Range Surface Element

Kenmore Bake Element

Kenmore Bake Element

Kenmore Oven Broil Element

Kenmore Oven Broil Element

Kenmore Bake Element Kit

Kenmore 6 Inch Small Surface Element

Kenmore Dual Element

Kenmore Oven Baking Element

Kenmore 6 Inch Small Surface Element

Kenmore Dual Element

Kenmore Oven Broil Element

Common Problems