Kenmore / Sears Refrigerator Drawer, Shelf, Pan

The Pantry Drawer Rail is an OEM part for Whirlpool refrigerators. This part allows it to slide in and out smoothly for easy access to stored food items.

Causes of a bad pantry drawer rail can include repeated heavy loads, general wear and tear, or accidental damage.

Symptoms of a bad pantry drawer rail include:

• Difficulty sliding the pantry drawer in and out
• Pantry drawer not staying in place
• Uneven or wobbly drawer movement
• Visible damage or bending of the rail

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement meat pan restores the refrigerator's deli drawer, giving you a dedicated space for meats and snacks while sliding smoothly on the existing rails. Replace cracked or missing pans to keep contents organized and contained.

• Provides a sliding storage drawer for meats and deli items in the fresh food compartment
• Fits into existing shelf rails for smooth access and organization
• Helps contain spills and prevent items from falling into lower areas
• Replace if the drawer is cracked, broken, warped, missing, or no longer slides/stays on its tracks

• Remove food from the drawer and slide the old pan straight out of the rails
• Inspect/clean the rails and check for bends before installing the new pan
• Transfer any removable trim or accessories from the old drawer, if present
• Align with the rails and slide in until fully seated; do not force

Right hand

The Glass Shelf is an OEM part for Whirlpool refrigerators. This shelf provides a stable and durable surface for storing food items within the refrigerator, helping to keep the interior organized and allowing easy access to stored items.

Causes of a bad glass shelf can include accidental impacts, overloading with heavy items, or thermal stress from placing hot containers directly on the glass.

Symptoms of a bad glass shelf include:

• Visible cracks or chips in the glass
• The shelf not fitting securely in place
• Difficulty in removing or adjusting the shelf
• Items not being properly supported, leading to instability

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Crisper Frame Support is an OEM part for Whirlpool refrigerators. This part provides structural integrity and support for the crisper drawer, ensuring it remains stable and functions smoothly. 

Causes of a bad crisper frame support can include regular wear and tear from frequent use, accidental impacts, or overloading the crisper drawer. 

Symptoms of a bad crisper frame support include:

• The crisper drawer not sliding in and out easily
• Misalignment or instability of the crisper drawer
• Visible cracks or breaks in the frame support
• Difficulty in opening or closing the crisper drawer

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Snack Pan is an OEM part for Whirlpool refrigerators. It provides a convenient way to store snacks, spreads and other small food items directly within the refrigerator shelves. Made of durable plastic, the shallow pan design catches any drips or spills that could soil refrigerator surfaces.

Causes of a bad refrigerator snack pan include cracks or breaks from repeated impact or stresses over several years of use. Warping from excessive cold exposure is also possible.

Symptoms of a failed pan include:

• Inability to properly contain items due to cracks or holes
• Warped edges that cause stored items to shift or spill
• Staining or residues that won't clean from refrigerator surfaces

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Color: white. Measures about 11 inches wide by 4-1/2 inches high by 5 inches deep.

This left-hand support secures and aligns the corresponding shelf or drawer assembly inside the refrigerator, helping it sit level and operate smoothly. Replace a cracked or missing support to restore proper fit and function.

• Provides structural support on the left side of the mounted assembly
• Maintains level alignment to prevent binding, rubbing, or sagging
• Helps drawers/shelves open and close smoothly when intact
• Common signs: uneven or sticking operation, tilting or dropping, visible cracks or broken tabs

• Disconnect power and remove items from the affected area before servicing
• Remove the shelf/drawer; release locking tabs or remove any fasteners holding the old support
• Position the new support on the left side and reuse existing hardware if required
• Smooth operation before reloading

This refrigerator crisper pan is the slide-out drawer that stores fruits and vegetables in the fresh food compartment. Replace a cracked or missing drawer to restore smooth operation and keep produce contained and organized.

• Holds produce in a dedicated compartment within the fresh food section
• Slides on the existing rails for easy access and organization
• Helps maintain a contained environment for produce when used with the original cover/humidity control
• Common signs it's needed: cracked or broken pan, rough or sticking slide action, falls off track, or missing drawer

• Disconnect power before servicing and clear the shelf area
• If equipped, lift out the glass/shelf cover to access the rails
• Align the pan with the tracks and slide straight in; do not force
• The drawer stops engage and the pan moves smoothly on both rails

The Shelf Support is an OEM part for Frigidaire refrigerators. Installed at set positions along the side walls, shelf supports provide sturdy surfaces on which to rest adjustable shelves or glass shelves. 

Causes of bad shelf supports can include general wear from repeated loading and unloading of shelves over time, as well as damage from accidental impacts.

Symptoms of bad shelf supports include:

• Shelves that wobble or sag in positions
• Difficulty inserting or removing shelves
• Small dents or breaks in the support surfaces
• Supports that are loosened from wall positions

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Left Hand

The Shelf Support is an OEM part for Frigidaire refrigerators. This part provides stability and support for refrigerator shelves, ensuring that they remain securely in place and can hold the weight of stored items.

Causes of a bad shelf support can include accidental impacts, overloading the shelves with heavy items, or wear and tear over time. 

Symptoms of a bad shelf support include:

• Shelves that do not stay securely in place
• Sagging or tilting shelves
• Cracks or visible damage on the supports
• Difficulty in adjusting or repositioning shelves

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This meat pan is the refrigerator's deli drawer. Replacing a cracked or missing bin restores smooth sliding access for meats and cheeses and helps keep the fresh food section organized.

• Creates a dedicated compartment for deli items in the fresh food section
• Slides on existing shelf rails for easy access
• Restores proper fit when the original bin is cracked, warped, or missing
• Common symptoms: broken or missing drawer, front lip cracked, drawer falls or won't slide smoothly

• Remove contents; pull the old drawer straight out from the rails
• Inspect and clean the rails; transfer any reusable parts from the old drawer if applicable
• Align the new pan on the rails and slide it fully into place
• If movement is tight, confirm the shelf cover and rails are seated and level

This spur gear is part of the appliance's drive assembly, transferring motor power to mating components. Replacing a worn or stripped gear restores smooth, consistent motion and helps eliminate grinding, slipping, or no-drive issues. What it does

• Transfers rotational power within the drive mechanism
• Maintains proper engagement with mating gear(s) for smooth operation
• Common failure symptoms: grinding/clicking noises, slipping or stalled movement, irregular motion
• Visual clues: rounded, chipped, or missing teeth

• One spur gear

• Disconnect power; turn off water supply before service
• Access the drive assembly and note gear orientation and any shims/washers during disassembly
• Inspect mating gears, bushings, and bearings; replace any worn components to prevent rapid re-failure
• Apply manufacturer-specified grease if required and tighten fasteners per service information

The Drawer Glide Gear is an OEM part for Whirlpool refrigerators. This part ensures the smooth operation of refrigerator drawers, allowing them to slide in and out with ease. This gear mechanism is vital for the user-friendly access to stored food items, contributing to the efficient organization and optimization of space within the refrigerator.

Causes for replacement include physical damage such as cracks or breakage, wear that impedes smooth operation, or a malfunction that prevents drawers from opening or closing properly.

Symptoms of a bad Drawer Glide Gear include:

• Difficulty in sliding the refrigerator drawers
• Uneven movement or jamming of the drawer
• Noise when opening or closing the drawer

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement door bin mounts on the inside of your refrigerator door to hold bottles, jars, and condiments. Replacing a cracked or loose bin restores safe, usable storage and helps keep items organized and accessible.

• Provides storage on the door to keep bottles and jars upright
• Restores capacity when the original bin is cracked, warped, or missing
• Helps prevent items from tipping or falling when the door opens/closes
• Common symptoms: bin falls off, won't stay seated, or has broken tabs/cracks

What's included: 1 door bin Install notes:

• Remove all items from the old bin; lift straight up to release from the door slots
• Align the new bin's tabs with the slots and press down until fully seated
• Do not force; re-align if resistance is felt to avoid damaging the door liner
• Place in the correct door position for your model; some bins aren't interchangeable between levels