Kenmore / Sears Refrigerator Handle

Color: White. For biscuit order WP2202807T. For black order WP2202807B. For the freezer door handle in white order WP2202806W.

The Door Handle is an OEM part for Frigidaire refrigerators. This part provides a secure grip for opening and closing the refrigerator door. This handle is essential for daily use, ensuring easy and convenient access to the refrigerator's contents.

Over time, the door handle can become worn out or damaged due to frequent use, mishandling, or accidental impacts.  

Symptoms of a bad door handle include:

• Looseness or wobbling when pulled
• Cracks or breaks in the handle material
• Difficulty in opening or closing the door
• The handle detaching from the door

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Refrigerator Door Handle is an OEM replacement part for LG refrigerators. The door handle provides an easy grip point for opening and closing the refrigerator door. 

Symptoms of a bad door handle include:

• Looseness, wobbling, or detachment from the refrigerator door  
• Cracking or splitting of the plastic material
• Discoloration or warping from sun exposure

Causes can be regular wear and tear over many opening and closing cycles. Repeated force exerted by grabbing the handle may cause stress fractures. Exposure to direct sunlight's UV rays can degrade plastic over time as well.

This OEM LG part is also compatible with Sears/Kenmore refrigerators.

This handle is Black. For white order WP2206934W and for graphite order WP2206934J.

Replace a cracked or loose door handle with this factory-fit handle for select dishwashers. It restores a secure grip for opening and closing the door and refreshes the front appearance.

• Provides the handhold needed to open and close the dishwasher door
• Direct replacement for a broken, cracked, loose, or missing handle
• Helps correct a wobbly or unstable grip point on the door
• Refreshes the look of the appliance front panel

• Disconnect power at the breaker before servicing the door
• Open the door and access the handle's mounting screws from the inside; support the handle while removing hardware
• Transfer and reuse existing screws or end caps if your model uses them
• Tighten evenly; check door operation before restoring power

This refrigerator door handle restores a secure, comfortable grip so you can open and close the door with confidence. Replace a cracked or loose handle to refresh your appliance's look and keep everyday use hassle-free.

• Provides the handhold used to open and close the refrigerator or freezer door
• Replaces cracked, broken, or missing handles
• Helps correct a loose or wobbly handle
• Can make the door easier to open when the old handle is damaged
• Restores the appliance's original appearance

• Unplug the refrigerator before servicing and wear cut-resistant gloves.
• Protect the door finish; remove any trim caps or set screws (as applicable) and detach the old handle.
• Align the new handle on the mounting studs and tighten screws evenly; do not overtighten.
• Verify the handle is secure and the door opens, closes, and seals properly.

The Dryer Door Handle is an OEM replacement part for Whirlpool dryers. A dryer door handle can deteriorate due to prolonged use, repeated force when opening or closing the door, or accidental impact that causes cracks or breakage. These factors may compromise the handle's structural integrity and make it less reliable.

Color: White

Symptoms of a bad Dryer Door Handle include:

• Loose or wobbly handle
• Cracks or visible damage to the handle
• Difficulty opening or closing the dryer door

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: Stainless.

Restore a solid, comfortable grip on your freezer door with this black Freezer Door Handle. It replaces a damaged or worn handle to bring back dependable daily use and a clean, factory look.

• Provides a sturdy handhold for opening and closing the freezer door
• Direct replacement for a cracked, broken, loose, or missing handle
• Refreshes the appliance's appearance if the old handle is scuffed or discolored
• Installs on the existing mounting points for your model

• Unplug the appliance and secure the door before service.
• Access and loosen the handle's set screws or mounting screws, then remove the old handle.
• Position the new handle; transfer and tighten existing fasteners evenly—do not overtighten.
• Verify smooth door operation and alignment after installation.

This replacement block is a small structural component used inside the refrigerator to locate, support, or align its mating parts. Replacing a worn or broken block restores proper fit and helps keep the affected assembly secure. What it does:

• Provides a stable mounting/locating point for the applicable assembly
• Helps maintain alignment and reduces wobble or looseness
• Common failure signs: cracks, missing piece, or stripped fastener hole
• Symptoms may include rattling, sagging, or parts that won't stay in place

• 1 block

• Unplug the refrigerator before servicing; wear cut-resistant gloves
• Remove items and any obstructing parts to access the block; note orientation for reassembly
• Transfer any reusable hardware from the old block and secure the new block without overtightening
• Restore power and verify proper fit and operation of the serviced area

This freezer door handle restores a secure, comfortable grip on your refrigerator's freezer door. Replace it when the original is cracked, loose, or missing to maintain safe operation, clean appearance, and easy everyday access.

• Provides the handhold used to open and close the freezer door
• Attaches to the door's existing mounting points/fasteners for a secure fit
• Helps resolve issues such as a broken, cracked, or wobbly handle
• Can improve ease of opening if the old handle has failed

• Disconnect power before servicing; wear cut-resistant gloves
• Support the old handle, then loosen/remove its fasteners; note their placement
• Position the new handle on the existing mounts and tighten fasteners evenly
• Do not overtighten; verify alignment and that the handle is secure

Color: White. Includes the chrome band and snap lock clips.

This refrigerator door handle assembly replaces a worn or broken door handle so you can open and close the fridge safely and easily. It restores a solid grip and original door appearance. What it does:

• Replaces a cracked, loose or missing refrigerator door handle
• Provides a secure gripping surface for opening and closing the door
• Restores proper handle alignment and helps prevent accidental slips
• Matches OEM fit and mounting points for straightforward replacement

• Disconnect power and empty or support the door before starting to avoid injury or damage
• Replacement typically requires basic hand tools; handle mounting fasteners may need removal
• Have a helper hold the door if needed; follow manufacturer's instructions for safe reassembly

This door trim handle is the exterior trim piece that covers and finishes the refrigerator door handle area, restoring appearance and protecting mounting hardware. It gives a clean, finished look when the original trim is cracked, loose, or missing. What it does:

• Covers handle mounting points and hides screws for a finished door appearance
• Restores a secure feel when the original trim is cracked, split, or broken
• Prevents dirt buildup around the handle mounting area
• Helps maintain proper clearance and alignment of the exterior handle

• One trim handle piece as shown

• High-level snap-on or screw-on replacement; remove any old broken trim before installing
• Use basic hand tools; avoid overtightening fasteners to prevent cracking
• If trim attaches near sealed door components, handle gently to avoid damaging the door finish or gasket
• For safety, disconnect power only if instructed by the manufacturer for your model

This handle assembly replaces a damaged or worn refrigerator door handle to restore a secure grip and normal door operation. Durable, finished replacement designed to match the factory mounting points and appearance. What it does:

• Provides a solid mounting point to open and close the refrigerator door smoothly.
• Replaces cracked, loose, or missing handles that make the door hard to grip or look worn.
• Helps restore proper door alignment and user control when the original handle is bent or broken.
• Preserves the original exterior appearance with a factory-style finish.

• One handle assembly

• Install requires basic hand tools; keep original screws and trim unless new fasteners are provided.
• Power to the appliance is not required for handle replacement; remove any magnetic items from the door before work.
• Align the handle to the factory holes and tighten fasteners securely but do not overtighten to avoid cracking the handle or trim.
• If trim or door finish is damaged, inspect surrounding components before final installation.