Kitchenaid Wall Oven Parts

Placed burners on. Read more

My Whirlpool stove had two power burners in the front. I don’t need two so I bought the same parts like the back burner. Your website explained that I need the burner valve also. My son changed it out with no problem. I received my order in one day! We watched the video so we were prepared. I recommend this website to anyone. Read more

Ordered the replacement panel and disassembled the upper oven door, which was needed, as the inside glass areas needed some cleaning. Read more

• Touchpad does not respond

Unplugged the stove. I had to remove mounting screws from under front panel. Then Remove the side panels in order to remove the trim. Under the trim there are two gold screws that hold the front panel in place. Unplug the membrane switch and remove the 4 screws that hold it in place. mount the new membrane switch and use plug it in. Then replaced all screws. Plugged stove back in. It took me about 45 minutes to find the final screws hidden under the trim under the side panel. Also make... Read more

Called repairman who said he could not fix it, which I did not believe. Read about issue on line and confirmed the issue to be hinges when disassembled. Ordered, easy replacement, and door works perfect. Did not use backing plates, but likely not worth returning due to freight. Great service by your team. Read more

Replaced it with the part I got from you. Read more

Husband fixed it Read more

Ordered the parts which the sales rep was extremely helpful courteous and knowledgeable. The order arrived within 3 working days. Very easy remove and replace. Job done! Extremely satisfied customer and now our go to vendor! Read more

Although I had difficulties finding the right part to order (never could find the model #s on the oven), somehow I found this part. It fits perfectly and was very easy to install. Thank you! Read more

• Little to no heat when baking

Turned off 40 Amp breaker. Removed shelves from oven. Removed two screws in back panel holding element in place. Slowly pulled element free making sure wires stayed attached and not lost in oven insulation. Removed two wires from old element. Attached wires to new element. Pushed wires back into oven rear wall. Reinstalled the previously removed two screws. Turned on breaker. Total time less than 10 minutes. Read more

Simple. Just pulled out the old and popped in the new. Rangetop looks much better, though grates and burner rings (no longer available) could use repainting with heat resistant enamel or some other treatment. Read more

My appliance is a Whirlpool Accubake Wall Oven, single door. After using the tech sheet and measuring the ohms of the two micro switches that sends signals when the door is shut and locked, determined the lock was faulty. Pretty simple to change, the most difficult part was taking the digital face off of the oven without damaging the control board. TIP: take a picture of the latch switches to ensure you put the correct wires on the correct switch. Read more

I disassembled the top of the range and looked at the problem burner. It looked like there was a spark at all three other burners but not the problem burner. There was a visible spark at the connector between the wiring harness and the ceramic igniter but that spark wasn't making it up to the top of the igniter where it can light the burner. I ordered a new igniter for $19 and it was on my doorstep the next day. I replaced the part and now my wife thinks I am a genius. Don't tell her that... Read more