Lawn Mower Spring Parts

Internal spring for walk-behind lawn mowers. Secures various components while allowing flexibility. Replace if stretched, broken, or no longer holds tension.

This is a simple extension spring with an outside diameter of 0.38 and a slack length of 2.5. It is primarily used as an extension spring for snowblowers, but may be compatible with other lawn equipment. It’s designed to apply tension as the throttle is applied. The more gas there is, the more resistance will be present. Under most circumstances, replacement is easy. When the spring breaks or gets rusty, look at both points of attachment. Memorize where it’s attached, or take a picture, and remove the old spring using a pair of pliers if necessary. Install the new spring and the tool is ready to use. This is an OEM part sourced directly from MTD, and it is sold individually. It’s black in color and was initially designed for Troy-Bilt lawnmowers. However, because this is a versatile part, it has since been repurposed for a number of MTD and related machines in other brands. These include lawn tractors and snowblowers, as well as lawnmowers, in brands such as Ryobi, Yard Machines, Husky, and Cub Cadet.

This extension spring attaches to the axle support bracket and the drive belt idler pulley on many types of lawn and garden equipment. It creates additional tension to the drive belt idler pulley. Sometimes the extension spring can be stretched out or may break, often caused through excess use. If this is the case, the spring will need to be replaced.If the spring is broken or no longer creates the appropriate amount of tension, replacement is required. It is an easy process that only requires a set of pliers. The pliers can be used to take the old spring off of the yard equipment before attaching the new extension spring. Make sure the equipment is on a stable surface and powered off when working with it. Remove the spark plug wire to prevent accidents.This extension spring is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The spring is made to be used with lawnmowers, lawn tractors, and tillers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

An authentic OEM replacement extension spring is an integral part of a lawn tractor or snowblowers brake system that helps to hold together and redistribute energy throughout the lower deck. When a driver applies the brakes, the lower deck has a tendency to continue moving forward with inertia. This extension spring helps to keep the parts in place and transfer a balance of energy. Although replacing the extension spring itself is a simple and straightforward process, gaining access to the spring is a little complicated as it requires removing the lawn mower or snowblower's lower deck. You will need a pair of pliers to remove the pins and cables that hold the lower deck in place but there is no other required hardware. Be sure to follow the user's manual as you remove the deck. This part is a top-quality replacement part sourced from its original manufacturer. It is designed to be used with Murray, Husky, Troy-Bilt Poulan, Yard Man, Yard Machines, Bolens, and MTD appliances. This part ships individually.

Replacement brake return spring for lawn tractors and riding mowers. Installs on the brake assembly to restore proper brake release function when original is broken, stretched, or missing.

Idler return spring for lawn tractor mower deck. Secures idler pulley to belt system. Replace if stretched, broken, or missing to restore proper tension.

This is a genuine replacement brake spring that is designed for use with select snowblower units. The brake spring is connected from the idler pulley to the frame assembly. This provides the tension for the brake on the snowblower, allowing the brake to function correctly. Over time, this spring can become worn and stretched and need replaced. There may also be impact damage or other situations where the spring could break. Regardless of the cause, a broken brake spring needs replaced immediately for safe operation of the machine. It is important to disconnect the power and wear gloves when performing repairs on snowblowers, and especially when working near the blades. Disconnect the old spring, hook the new spring through the proper holes, and then reconnect the power and start the machine to test the brake.This genuine OEM brake spring is manufactured to exact standards by Husqvarna. It can be used in select snowblowers and throwers from Husqvarna, Poulan, and Jonsered. This is sold as an individual piece and does not include any hardware or other parts. The brake spring repair will require a screwdriver, pliers, and adjustable wrench.

Torsion spring for walk-behind lawn mowers. Mounts to chassis to maintain spring tension and store mechanical energy. Replace if broken or damaged.

Replacement torsion spring for gas walk-behind mowers. Enables smooth deflector shield movement. Order if your original spring is broken, stretched, or missing.

Deck drive spring for riding mowers and tractors. Replaces cracked, broken, or worn springs on mower deck drive systems. Direct fit installation.

This replacement part is a return spring, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A return spring is an essential part of many different engines. This type of spring is able to stretch and allow two different parts to work together and ensure that the machine is running smoothly. A new return spring might be needed if there are unusual noises coming from the inside of the device. It is possible that the return spring is malfunctioning or out of place. It is common that this type of spring can become stripped and snap over time. Be sure the engine is cooled down prior to attempting this repair. This spring is sold individually and is sourced from the manufacturer to ensure a proper fit in many devices. This is also a genuine OEM replacement part.

Tension spring for riding mowers and lawn tractors. Replaces worn, broken, or loose springs that no longer hold proper tension to secure components.

Torsion spring for riding mowers and tractors. Provides tension and torque to internal components. Replace if damaged, broken, or missing.

Vibration-dampening spring assembly that installs between the engine and handle. Replace if springs are broken, worn, or missing to restore proper isolation.

Compression spring for riding mowers and tractors. Replaces worn, broken, or missing springs in engine and mechanical assemblies. Essential hardware part.

Extension spring for lawn tractors. Installs in various linkage and control systems. Replace if stretched, broken, or missing to restore proper tension.