Parts for Whirlpool LTG6234DQ1: 09 - Machine Base Parts

Specs: 10-16 x 1/2 inch.

Secures suspension springs at the washer base to absorb vibrations. Replace if cracked, worn, or broken to restore proper drum stabilization.

The Suspension Spring is an OEM part for Whirlpool washing machines. It helps support the washer tub and absorbs shock as the tub moves during the wash and spin cycles, ensuring stability and reducing vibrations. This spring is essential for maintaining the washer's balance, preventing excessive movement, and minimizing noise during operation.

Causes of a bad suspension spring can include wear and tear from regular use, overloading the washer, or damage from unbalanced loads. When the suspension spring fails, it can lead to increased vibrations, noise, and potential damage to other components of the washing machine.

Symptoms of a bad Suspension Spring include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging noises
• Washer moving or "walking" during operation
• Uneven or off-balance loads

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Sound Dampening Ring is an OEM replacement part for Whirlpool washing machines. Located within the clutch housing, it serves to minimize noise transmission from internal components.

Causes relate to years of absorbing internal impacts fatiguing the damping material. Buildup of grime and detergent residue in its ridges may diminish noise-isolating effectiveness over time.

Symptoms of failure include:

• Excessive humming or clanking sounds from the transmission area
• Increased cabinet vibrations felt externally during operation
• Improper sound insulation leads to a louder overall noise profile

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

Secures suspension springs to the washer tub assembly. Replace if cracked, worn, or missing to prevent tub instability during wash and spin cycles.

Supports the spin basket on the center post for smooth, quiet rotation. Replace if your washer is noisy, vibrating excessively, or has poor spin performance.

Seals the washer shaft to prevent water leaks from the tub during wash cycles. Replace if you notice water pooling under your machine. Verify fit.

Suspension spring that supports and stabilizes the washer tub during operation. Replace if broken, worn, or missing to prevent tub lean or imbalance.

The Suspension Pad Kit is an OEM part for Whirlpool washers. It is a kit that includes 3 suspension pads designed to provide stability and reduce vibration during the washer's operation. These pads are designed to absorb shocks and prevent excessive movement.

You should replace the suspension pad kit if the pads become worn out or damaged. Causes of bad suspension pads can include regular wear and tear, overloading the washer, or continuous exposure to high levels of vibration and movement.

Symptoms of bad suspension pads include:

• Excessive shaking or vibrating during the wash or spin cycles
• Loud banging noises coming from the washer
• The washer moving or "walking" during operation
• Uneven or unbalanced loads despite proper loading

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Includes suspension pads.

Replacement tub suspension pads for washing machines. Install under the tub to cushion and stabilize during spin cycles. Replace if cracked or missing.

Base assembly for laundry center units. Structural support platform that holds washer and dryer components. Replace if cracked, rusted, or damaged.

The Shaft Seal is an OEM part for Whirlpool washing machines. This seal is designed to fit around the shaft that connects the tub to the transmission or motor, preventing water from leaking out of the tub and into the machine's internal components.

Causes of damage to the Shaft Seal often involve normal wear and tear from regular use, as the constant motion of the shaft can gradually degrade the seal.

Symptoms of a bad Shaft Seal include:

• Water leaking from the underside of the washing machine, particularly during or after a wash cycle
• A noisy operation, especially during the spin cycle, can sometimes result from water leaking into the bearings and causing them to fail
• The presence of rust or corrosion around the area where the shaft enters the tub

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Bearing and seal kit for washers. Replace when you hear grinding, thumping, or banging noises during spin cycles. Includes bearings and seals for shaft.