Maytag Baffle Parts

Note: For Baffle mounting screws, order part# W11684512.

The Dryer Drum Baffle is an OEM part for Whirlpool dryers. It is a component that helps direct and circulate the flow of heated air within the dryer drum, ensuring even and efficient drying of clothing. This part measures approximately 17 inches in length and 3-1/4 inches in height. Its mounting holes are positioned 12 inches apart, center to center. 

Causes of a faulty Dryer Drum Baffle include wear and tear over time, physical damage from foreign objects, or improper installation.

Symptoms of a bad Dryer Drum Baffle include:

• Clothes taking excessively long to dry or not drying evenly
• Excessive heat buildup or hot spots within the drum
• Loud rattling or thumping noises during the drying cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

Note: For Baffle mounting screws, order part# W11684512.

The Dryer Drum Baffle is an OEM part for Whirlpool electric dryers. Located inside the dryer drum, this rectangular component divides the airflow and improves drying efficiency. During cycles, the baffle helps separate clothes and direct heat more uniformly for even moisture removal throughout the load. This is the taller baffle. For the short one order WP33001755. 

Causes of a bad drum baffle can include constant impact from heavy loads, wear and tear over time, or damage from foreign objects in the drum.

Symptoms of a bad drum baffle include:

• Slow or prolonged drying times as air cannot circulate properly
• Some areas of clothes feeling damp while others are dry
• Lint or hair wrapping around a cracked or broken baffle
• Noise or vibration from a damaged baffle hitting the drum wall

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Baffle is an OEM replacement part for Whirlpool washers. It is a crucial component that helps to direct and control the flow of water during the wash cycle, ensuring efficient and even distribution of water throughout the tub.

A faulty or damaged baffle can lead to issues with water circulation and proper cleaning performance. Causes of a bad baffle can include wear and tear over time, clogging or buildup of debris, or physical damage due to impact or mishandling.

Symptoms that may indicate a need to replace the baffle include:

• Poor water circulation or uneven distribution of water during the wash cycle
• Inefficient cleaning or areas of the clothing remaining dry or unwashed
• Excessive noise or vibrations during operation
• Water leaks or flooding due to improper water flow

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: This part is 1 baffle. For a kit of 3 baffles, order part# 285976. For baffle screw, order part# WPY706189.

The Front Load Washer Drum Baffle is an OEM part for Whirlpool front-loading washing machines. This component plays a crucial role in directing water flow and distributing it evenly throughout the wash drum during the washing cycle.

Over time, the drum baffle can become worn or damaged due to the constant exposure to water, detergents, and the repeated impact of clothes during the wash cycles. This can lead to inefficient water distribution, reduced cleaning performance, and increased noise levels.

Symptoms of a bad drum baffle include:

• Uneven or incomplete cleaning of clothes
• Tangling or balling up of clothes during the wash cycle
• Excessive vibrations or loud noises during the wash cycle
• Water leaks or improper drainage

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Baffle is an OEM part for Whirlpool washing machines. This part is located inside the washer drum and aids in lifting and moving clothes during the wash cycle, ensuring that water and detergent are distributed evenly for thorough cleaning.

Common causes of a bad baffle include wear and tear from frequent use, breakage due to heavy or unbalanced loads, or damage from foreign objects that may enter the washer drum.

Symptoms of a bad baffle include:

• Clothes not being cleaned evenly
• Unusual noises during the wash cycle
• Clothes getting tangled or damaged
• Visible cracks or breaks in the baffle

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Baffle is an OEM part for Whirlpool washers. This part helps lift and move clothes around during the wash cycle. This action ensures that garments are thoroughly cleaned by allowing water and detergent to penetrate fabrics more effectively.

Causes of a bad baffle can include regular wear and tear, overloading the washer, or accidental impacts from heavy or hard items.

Symptoms of a bad baffle include:

• Thumping or banging noises during the wash cycle
• Clothes not being cleaned evenly
• Visible cracks or breaks in the baffle
• Baffle becoming detached from the drum

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This drum baffle is the internal clothes lifter for select 3.6-cu ft front-load washers. It helps tumble and separate laundry, improving wash action and preventing items from staying flat against the drum.

• Guides and lifts clothes as the drum rotates for better turnover and cleaning
• A damaged or missing baffle can cause poor wash performance or unusual tumbling noise
• Loose baffles may rattle or snag items during cycles
• Restores proper drum agitation and fabric movement

• Unplug washer and turn off water before servicing
• Access is typically from inside the drum; rotate drum to align and release/secure the baffle
• Reuse existing hardware if no new fasteners are provided
• The baffle is fully locked/secured before running a test cycle

This drum baffle mounts inside the rotating drum and lifts items so they tumble evenly through the cycle. Replace a cracked, loose, or missing baffle to reduce noise and restore consistent tumbling performance. What it does:

• Lifts and separates laundry as the drum turns for even tumbling
• Helps prevent clumping that can lead to poor results or longer cycles
• Maintains balanced drum movement; damage or looseness can cause rattling or scraping
• May help if items aren't tumbling well, you hear thumping, or garments snag inside the drum

• 1 drum baffle

• Disconnect power before servicing; for gas dryers, also shut off gas. For washers, turn off water supply.
• Open the door and rotate the drum to access the baffle's mounting screw(s).
• Remove the screw(s), disengage the baffle from its slots, and lift it out.
• Seat the new baffle in the slots and secure with the screw(s). Hand-spin the drum to confirm clearance before use.

The Dryer Drum Baffle is an OEM replacement part designed for Whirlpool dryers. The baffle, located inside the drum, helps lift and tumble clothes during the drying cycle, ensuring even and efficient drying. It agitates the clothing, allowing air to circulate freely and preventing tangling.

Note: This is the tall baffle.

Over time, the drum baffle can become loose or damaged due to frequent use and contact with clothing or objects left in pockets. Physical wear or repeated impacts might cause it to crack, detach, or warp, reducing its ability to tumble clothes properly.

Symptoms of a faulty Drum Baffle include:

• Clothes not drying evenly or efficiently
• Unusual noises coming from the drum, such as rattling or banging
• Loose or detached baffle within the drum

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This drum baffle is the internal lifter that attaches to the rotating drum to raise and tumble laundry as it turns. Replacing a cracked, loose, or missing baffle restores proper tumbling, reduces thumping noises, and helps prevent fabric snags. What it does:

• Lifts and separates items for even tumbling and better circulation through the load
• Helps prevent clothes from balling up or riding the drum wall
• Common symptoms of failure: rattling/thumping, poor tumbling, visible cracks, or a missing vane
• Broken edges or loose mounting can snag items inside the drum

• 1 drum baffle

• Disconnect power before servicing; follow model-specific access steps for the drum
• Remove the old baffle by taking out mounting screws or releasing locking tabs; clear any trapped debris
• Align the new baffle with the keyed slots and secure fasteners firmly
• Hand-rotate the drum to verify clearance and quiet operation before reassembly

This drum baffle mounts inside the rotating drum to lift and tumble laundry during each cycle. Replacing a cracked, loose, or missing fin helps prevent snags and restores proper load movement. What it does:

• Lifts and turns items as the drum rotates to improve tumbling
• Separates garments to reduce tangling and keep loads moving evenly
• Helps prevent small items from lying flat against the drum surface
• Common symptoms include rattling or thumping, visible cracks, clothes snagging/tearing, and reduced tumbling

• One tall drum baffle

• Disconnect power; shut off gas supply before servicing
• Wear cut-resistant gloves; interior cabinet edges can be sharp
• Rotate the drum to access mounting points; support the drum while removing/installing the baffle
• Tighten fasteners securely; hand-turn the drum to verify clearance before testing

Short baffle

The Drum Baffle is an OEM part for Whirlpool washing machines. It is an internal component located inside the tub or drum that helps distribute water flow efficiently during the wash cycle. The baffle directs water in a way that ensures items are soaked and soaked evenly on all sides for thorough and effective cleaning.

Symptoms of a bad baffle include:

• Poor washing or rinsing performance 
• Items not getting completely clean or taking longer to wash
• An off-balance wash load  
• Excessive noise or vibration during spin cycles

Causes of a bad drum baffle can be normal wear and tear over time, or damage due to an off-balance or overfilling of the wash load. This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. Replace yours today to optimize washing quality.
 

Replacement drum baffle that lifts and tumbles clothes inside the dryer for more even drying and helps prevent garments from snagging. Restores proper drum agitation to reduce noise and improve drying performance. What it does:

• Lifts and separates clothes as the drum turns to promote even heat exposure and drying.
• Helps keep items from bunching or wrapping around the drum, which can cause uneven drying.
• Reduces rattling, thumping, or scraping noises tied to a loose or damaged lifter.
• Protects fabrics from snagging or rubbing against the drum surface.

• Disconnect power to the appliance before beginning service to avoid shock or injury.
• Access may require removing the dryer front panel or drum.
• Keep fasteners and mounting tabs aligned during reassembly to ensure the baffle seats correctly.

This drum baffle replaces a worn or damaged lifter inside the dryer drum to help clothes tumble evenly and prevent items from bunching. Restores proper tumbling and reduces rubbing/snags caused by broken or missing lifters. What it does:

• Lifts and separates clothes as the drum turns to promote even drying
• Helps prevent garments from tangling or bunching in the drum
• Reduces fabric rubbing and potential snags caused by damaged lifters
• Commonly replaced when the original is cracked, loose, or missing

• One drum baffle

• Disconnect power before starting repairs
• Removal of the dryer drum or front panel is typically required; follow model-specific service instructions
• Use appropriate hand tools and keep track of mounting screws/clips for reassembly
• Inspect drum, mounting studs, and fasteners; replace any stripped or damaged hardware for a secure fit

This drum baffle restores proper tumbling by lifting and separating laundry as the dryer drum rotates. It helps improve drying performance and reduces garment bunching. What it does:

• Lifts and tumbles clothes so air flows more evenly through the load
• Helps prevent garments from clumping or wrapping around the drum
• Can reduce rubbing, thumping, or scraping noises caused by a loose or damaged lifter
• Restores consistent drum contact and improves drying efficiency

• Disconnect power before starting any repair to avoid shock or injury
• Access typically requires opening the dryer cabinet or front panel; small tools may be needed
• Align the baffle with factory mounting holes and secure with existing fasteners; use correct screws if replacements are required
• Inspect and replace worn drum or support parts as needed for reliable operation