Maytag Trim

Color: Black

The Door Trim is an OEM replacement part for Whirlpool ranges. It covers the outer edge of the oven door, protecting it from wear and dust while retaining heat and improving aesthetics. 

Causes of a bad door trim include normal wear and tear over time from repeated door openings and closings, exposure to heat and steam from cooking, or accidental damage. The high-temperature paint coating can peel or bubble and the rigid trim material may crack or warp.

Symptoms of a bad door trim include:

• Peeling, bubbling, or cracked paint
• Warped or misshapen trim 
• Gaps appearing around the door seal
• Increased heat loss from the oven cavity
• Declining aesthetic appeal

Color: Black - Right Hand Trim. For the Left Hand use W10761018

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Oven Door Trim Kit is an OEM part for Whirlpool ranges. This kit includes trim pieces that frame the oven door, providing a finished look and helping to seal the door properly.

Causes of a bad oven door trim can include wear and tear from regular use, exposure to high temperatures, or physical damage from impacts or mishandling.

Symptoms of a bad oven door trim include:

• Visible cracks or damage to the trim
• The oven door not sealing properly
• Heat escaping from around the oven door
• The trim becoming loose or detaching

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This fan switch restores dependable control of your appliance's ventilation fan. It routes power to the blower motor so you can turn the fan on and off from the control panel when the original switch becomes worn or fails.

• Controls electrical power to the blower motor
• Restores reliable on/off fan operation from the user interface
• Typical symptoms: fan won't start, won't shut off, runs intermittently, or the switch/rocker feels loose or broken
• Contacts can wear or arc over time from repeated use

• Disconnect power at the breaker or unplug the appliance before servicing
• Access the switch from the control panel; note wire positions and take a photo for reference
• Move wires one at a time to the matching terminals on the new switch; replace any heat-damaged connectors
• Reassemble, restore power, and test fan operation

A replacement trim piece for the breaker area that restores a finished look and helps shield the breaker opening. Use this trim to replace cracked, warped, or missing pieces and improve appliance appearance and safety. What it does:

• Covers the breaker opening and finishes the appliance exterior.
• Replaces damaged, cracked, or missing trim that leaves internal components exposed.
• Helps reduce dirt entry and accidental contact with the breaker area.
• Restores a neat, factory appearance to the appliance.

• Disconnect power at the home's breaker panel before servicing the appliance.
• Installation typically requires basic hand tools; follow the OEM service manual for exact steps.
• Handle edges carefully; damaged trim can have sharp edges.

This door trim is the exterior finish piece that restores a clean, finished look to a refrigerator door and protects the door edge from chips and wear. Ideal for replacing cracked, dented, or missing trim to improve appearance. What it does:

• Covers and protects the outer edge of the refrigerator door for a finished cosmetic appearance
• Replaces damaged or missing trim that can make the door look worn or allow edge damage to spread
• Helps maintain proper fit of adjacent components by restoring the door's exterior profile
• Common symptom: visible cracks, dents, broken mounting tabs, or missing trim panels

• Disconnect power and empty door area before starting; follow appliance safety practices
• Minor disassembly (remove door handle or inner door panel) may be required—use basic hand tools
• Align trim carefully to avoid cracking mounting tabs; do not force into place
• If mounting hardware or adjacent parts are damaged, replace them as needed for a secure fit

This replacement trim restores the finished edge and appearance around the appliance door, helping keep the door seal covered and giving a clean, factory look. It's a direct-fit exterior trim piece used where the original is cracked, dented, or missing. What it does:

• Covers and protects the outer edge of the appliance door for a finished appearance
• Helps conceal fasteners and the gap between the door and cabinet
• Returns the door to factory aesthetics after impact or wear
• Commonly replaced when trim is cracked, bent, or cosmetic finish is damaged

• Disconnect power to the appliance before starting any work
• Handle trim carefully to avoid scratching the finish or cutting on sharp edges
• Align tabs and slots, then secure with the original fasteners; do not overtighten
• If the trim includes adhesive or clips, follow OEM instructions for proper seating

This shelf trim is the molded edge piece that finishes and protects the front edge of a refrigerator shelf, restoring a clean look and helping keep items from sliding off the shelf. What it does

• Replaces damaged, cracked, or missing shelf edge trim to restore a smooth, finished shelf front
• Helps keep glass or plastic shelves seated and reduces front-edge rattling or shifting
• Improves appearance by covering rough or chipped shelf edges
• Compatible with standard refrigerator glass/plastic shelves that use snap-on edge trim

• Remove food and slide the shelf out before attempting replacement
• Trim usually snaps onto the shelf edge; align and press firmly along the length until fully seated
• No specialized tools typically required; use a plastic trim tool to avoid scratching if needed
• Replace the shelf itself before installing trim

The Trim is an OEM component specifically designed for Whirlpool refrigerators. Installed along the outer edge of the refrigerator and freezer doors, the trim seamlessly frames the opening. Its styled accents and durable material withstand frequent use while enhancing the appliance's appearance.

Symptoms of bad trim can include cracks or chips developing from years of opening and closing the doors. Adhesive degradation may cause a loose, uneven fit.

Causes involve normal wear over time exposing the trim to repeated stresses. Impact damage could also compromise its structure.

Symptoms of a bad trim include:

• Gaps allowing air exchange reducing efficiency  
• Loose, flapping, or misaligned sections ruining aesthetics
• Cracks or splits compromising the weatherproof barrier

This OEM Whirlpool part is also compatible with KitchenAid, Maytag, Jenn-Air, Amana, and some Kenmore refrigerator models. Replace to restore an integral design element protecting the door seals.

This vent control damper assembly opens and closes the appliance vent to allow steam and exhaust to exit when needed, helping maintain proper airflow and reduce moisture buildup. It replaces a worn or stuck vent actuator. What it does:

• Operates the vent/damper to allow exhaust air to escape during use
• Prevents vent from staying stuck open or closed, which can cause excess moisture or reduced airflow
• Restores proper venting function when the original damper fails or binds
• Works as the mechanical control between the appliance cavity and external venting path

• One vent control (damper) assembly

• Disconnect power to the appliance before beginning any service
• Access may require removing exterior panels or the back cover
• Handle the damper gently to avoid bending the flap or linkages