Maytag Support Parts

The Suspension Rod Kit is an OEM replacement part for Whirlpool washing machines. They’re designed to help keep the washer balanced. If you’re washing machine is noisy, banging, or “walking”, it may be time to replace your suspension rods.

 Included in the kit:

• 4 suspension rods
• 4 bearings
• 4 bearing cups

The suspension rods in a washing machine can also experience failure for similar reasons as other parts. Overloading the washing machine is a frequent cause of suspension rod failure. The excess weight puts too much stress on the rods, causing them to bend or break. Constant use over time can lead to suspension rod failure as well. The repetitive motion can wear down the components and cause them to lose their structural integrity.

Replace your suspension rods and enjoy peaceful laundry time again! This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Suspension Rod Kit is an OEM replacement part for Whirlpool washing machines, designed to provide support and stability to the washer drum. This kit includes four suspension rods that connect the washing machine drum to the frame, allowing for controlled movement and reducing vibration during the spin cycle. These rods play a critical role in absorbing the motion of the washer drum, ensuring smooth operation and preventing excessive noise or movement that could damage the machine or affect its performance.

Causes of these issues often stem from normal wear and tear, as the suspension rods can become worn out or damaged over time. Heavy or uneven loads can also put extra stress on the rods, leading to premature failure.

Symptoms of a bad part:

• Excessive noise or vibration during operation
• Shaking or movement of the washer
• Unevenly washed clothes or excessive wrinkles

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Suspension Rods are OEM parts for Whirlpool washing machines. They are designed to support the washer's tub assembly, maintaining balance and stability during the spin and agitation cycles. These rods connect the tub to the washer's frame and help absorb vibrations, preventing excessive movement that can lead to operational issues.

Symptoms of bad Suspension Rods include:

• Unusual vibrations or shaking during the wash cycle.
• The washing machine "walking" or moving across the floor.
• Loud banging noises, especially during high-speed spins.
• The tub sagging or tilting more than usual when loaded.

Causes of bad suspension rods can include wear and tear from normal use, stress from unbalanced loads, or degradation of the material properties over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Suspension Rod Kit is an OEM part for Whirlpool washing machines. This kit includes four suspension rods designed to support the washing machine's tub assembly. By absorbing vibrations and stabilizing the tub during the spin cycle, these rods play a crucial role in reducing noise and preventing the washing machine from moving excessively. 

Causes of a bad Suspension Rod Kit can include normal wear and tear, overloading the washing machine, or frequent heavy cycles that put extra strain on the rods. 

Symptoms of a bad Suspension Rod Kit include:

• The washing machine is excessively noisy during the spin cycle.
• The tub seems unbalanced or moves more than usual, even with light loads.
• The washing machine "walks" or moves from its original position during operation.
• Unfinished cycles or error codes indicating an unbalanced load.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Note: Left Hand side

The Track, Asm (LH) is an OEM part for Whirlpool dishwashers. It is a left-hand side track assembly that supports and guides the dishwasher's upper rack as it slides in and out. This component is crucial for the smooth operation of the rack system, ensuring that dishes can be easily and securely positioned within the dishwasher. The track measures approximately 13.25 inches in length and 3.25 inches in width. 

Causes of a bad Track, Asm (LH) can include physical damage from mishandling, accumulated debris obstructing the track's pathway, or wear from frequent use which may lead to malfunction or stiffness in the rack's movement.

Symptoms of a bad Track, Asm (LH) include:

• Difficulty pulling the upper rack in and out
• The rack getting stuck or derailing
• Unusual noises when the rack is moved

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: Right Hand side

The Track, Asm (RH) is an OEM part for Whirlpool dishwashers. It is the right-hand side track assembly that supports and guides the dishwasher's upper rack as it slides in and out. This part ensures that the rack moves smoothly and securely, allowing for easy loading and unloading of dishes while preventing disruptions during the wash cycle.

Causes of a bad Track, Asm (RH) can include wear from regular use, accumulation of debris that impairs movement, or damage from improper loading of the dishwasher rack.

Symptoms of a bad Track, Asm (RH) include:

• Difficulty in sliding the upper rack in and out
• The rack becoming stuck or detaching from the track
• Noises such as grinding or clicking when the rack moves

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Tub Suspension Pads are an OEM part for Whirlpool washing machines. These pads are designed to provide cushioning and stability to the washer tub, reducing vibration and noise during the wash and spin cycles. This kit contains three pads, each 2 1/4 inches long

Over time, the tub suspension pads can wear out or deteriorate, especially with frequent use or heavy loads. Exposure to harsh chemicals or unbalanced loads can also cause the pads to lose their effectiveness.

Symptoms of bad tub suspension pads include:

• Excessive vibration or shaking during operation
• Loud banging or thumping noises during the spin cycle
• The washer moving or "walking" across the floor
• Uneven or poorly balanced loads leading to inefficient washing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Suspension Bearing Kit is an OEM part for Whirlpool washing machines. It is designed to support the tub assembly and ensure smooth, stable operation during the wash cycle. The kit includes bearings and other components that help absorb vibrations and reduce noise, contributing to the longevity and efficiency of the machine. The 8-piece set has 4 types of suspension rod supports made of strong plastic and about 1.5 inches in diameter. 

Symptoms of a bad Suspension Bearing Kit include:

• Unusual noise during the spin cycle,
• Excessive vibration or "walking" of the washer,
• The washing machine drum sagging or appearing off-balance.

Causes of suspension bearing failure often involve wear and tear from regular use, overloading of the machine, or inadequate maintenance leading to deterioration of parts.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Upper Dishrack Track is an OEM part for Whirlpool dishwashers. This component is essential for the smooth and stable movement of the upper dishrack, allowing it to slide in and out.

Causes of a bad Upper Dishrack Track can include accumulation of debris that impedes the track's function, wear and tear from regular use, or damage from overloading the dishrack, which can lead to warping or cracking.

Symptoms of a bad Upper Dishrack Track include:

• Difficulty pulling out or pushing in the upper dishrack.
• The dishrack becoming stuck or derailing during movement.
• Unusual noises when moving the dishrack, such as grinding or clicking.
• Visible signs of wear or damage to the track.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Snubber Ring is an OEM part for Whirlpool washing machines. This part dampens the vibration and noise produced during the washer's spin cycle. Positioned at the base of the tub, the snubber ring provides a cushion that absorbs the impact between the moving parts and the stationary frame of the washer. 

Over time, wear or dust on the snubber ring can reduce its effectiveness, causing increased vibration, noise, and stress on the washing machine components, possibly leading to premature failure.

Symptoms of a bad Snubber Ring include:

• Unusual noise during the spin cycle
• The washing machine vibrating more than usual or "walking" across the floor
• Increased wear and tear on other components due to excessive vibration

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Suspension is an OEM part for Whirlpool washing machines. This component includes a set of rods and springs that support the washer drum and help to minimize vibrations during the wash and spin cycles. The suspension system ensures that the drum remains balanced, which is crucial for smooth operation and effective cleaning. This kit comes with a set of 4 suspension rods, bearings, and bushings.

Causes of a bad suspension can include wear and tear from regular use, overloading the washer, or damage due to unbalanced loads. A faulty suspension can lead to excessive vibrations, noise, and potential damage to the washer's internal components.

Symptoms of a bad suspension include:

• Excessive shaking or vibrating during wash cycles
• Loud banging or thumping noises
• The washer moving or "walking" during operation
• The drum appearing to be off-balance or sagging

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Suspension Pad Kit is an OEM part for Whirlpool washers. It is a kit that includes 3 suspension pads designed to provide stability and reduce vibration during the washer's operation. These pads are designed to absorb shocks and prevent excessive movement.

You should replace the suspension pad kit if the pads become worn out or damaged. Causes of bad suspension pads can include regular wear and tear, overloading the washer, or continuous exposure to high levels of vibration and movement.

Symptoms of bad suspension pads include:

• Excessive shaking or vibrating during the wash or spin cycles
• Loud banging noises coming from the washer
• The washer moving or "walking" during operation
• Uneven or unbalanced loads despite proper loading

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Mounting Plate is an OEM part for Whirlpool microwaves. This part is designed to mount and stabilize the microwave over the range, ensuring it is safely anchored in its designated space. The mounting plate serves as an interface between the microwave and the wall or cabinet, distributing the weight evenly and providing a firm foundation for the appliance.

Causes of a bad Mounting Plate can stem from improper installation, which may lead to undue stress and eventual warping or weakening of the material.

Symptoms of a bad Mounting Plate include:

• Loose microwave unit
• Difficulty in aligning or installing the microwave 
• Visible signs of wear, rust, or damage on the plate

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Suspension Rod Kit is an OEM part for Whirlpool washing machines. This kit includes four suspension rods that support the washer tub and help absorb vibrations during the spin cycle. These rods ensure the tub remains balanced, providing smooth and quiet operation.

You should replace the suspension rods if they become worn or damaged. Over time, heavy loads, unbalanced loads, or general wear and tear can cause the rods to lose their ability to stabilize the tub effectively. This can lead to excessive vibrations and noise during the wash cycle.

Symptoms of a bad suspension rod kit include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging or knocking noises
• Washer tub not staying centered
• Washer moving or walking during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Supply Tube is an OEM part for Whirlpool dishwashers. This part ensures that water is efficiently delivered from the dishwasher's pump to the spray arms, which then distribute the water to clean the dishes.

Causes for issues with the water supply tube often involve physical damage, such as cracks or holes, clogging from food particles or mineral deposits, and wear and tear from regular use.

Symptoms of a malfunctioning Water Supply Tube include:

• Poor cleaning results due to inadequate water flow to the spray arms
• Water leaking from the dishwasher if the tube is cracked or damaged
• Unusual noises from the dishwasher, indicating issues with water distribution

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Shock Absorber is an OEM part designed for Whirlpool washing machines. This part helps to dampen the motion of the tub during the spin cycle, reducing vibrations and noise. By absorbing the energy produced during operation, the shock absorber contributes to the stability and longevity of the machine. A well-functioning set of shock absorbers is essential for maintaining the washer's performance and preventing damage to other components.

Causes of a bad shock absorber can include wear and tear from regular use, excessive load sizes or unbalanced loads, and structural damage from moving or improper handling.

Symptoms of a bad Shock Absorber include:

• Increased vibration and noise during the spin cycle
• The washer moving or "walking" across the floor
• Unusual wear on other components due to excessive movement

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.