Need Help?
Call
Replacement surface burner base for gas ranges. Houses the gas outlet and supports the burner cap. Order when your original is cracked or damaged.
My Whirlpool stove had two power burners in the front. I don’t need two so I bought the same parts like the back burner. Your website explained that I need the burner valve also. My son changed it out with no problem. I received my order in one day! We watched the video so we were prepared. I recommend this website to anyone. Read more
Heat-resistant seal prevents heat loss around your oven door. Replace when frayed, cracked, or causing uneven baking. Verify fit with your model number.
Ordered oven door seal Part Number Y702338 (Whirlpool AP4291897) to replace the oven door seal on 30-year old Jenn-Air model S125 downdraft slide-in range. I called AppliancePartsPros and confirmed the part number, gathered my courage and asked my son-in-law to help. Thanks to another reviewer's suggestion, we placed a piece of wood about 3/4-inch thick between each of the door hinges and the frame of the oven before removing the door (to hold the hinges open and make it easy to put the door... Read more
Burner not heating? This surface heating element restores reliable heat to your cooktop. DIYers report straightforward installation in under an hour.
First, I just unscrewed all nuts that are holding the frame and all surface elements. Once all parts, surface elements, control switches, are loose from the original glass, I just moved all parts to the new glass. Due to the weight of the glass, all actions have to be done carefully as I broken one corner of the glass couple of years ago when I replaced one of the control switch. Read more
Sits on sealed gas burners to shape the flame and protect the burner head. Replace when the original is cracked, warped, damaged, or missing.
I was able to contact AppliancePartsPro.com and was able to complete a one-stop-shop to correct my issues. This was not the first time using this company. They have the catalogs of parts and great descriptions. I have listed them as a favorite on my computer. Read more
Securely holds the gas orifice in place for proper gas flow to range burners. Replace if worn, damaged from impact, or loose to restore stable burner operation.
Decorative bezel that surrounds control knobs on your gas range panel. Replace if cracked, broken, or damaged to restore the clean appearance of your oven.
The knob and bezel were purchased. It went well. Read more
Fix burners that won't light with this spark igniter electrode. Simple DIY repair—hardest part is accessing the back panel. Test for continuity first.
Internet suggested if yellow light happened time to replace. Bought two since I was having trouble with both for years. Would have been nice for a video to exist. The removal was nothing like what is out there and extended the time of the job. Read more
Color: Black. Measures about 2 inches in diameter. For white order WP74011276.
It was easy to fix the knobs. I took less than 10 minutes. Read more
Replaces cracked, stained, or warped oven bottom panel in gas ranges. Covers burner assembly and provides smooth, cleanable floor surface. Easy install.
I ordered the new oven bottom from Appliance Parts Pros and within three days I had a brand new oven bottom. Took the old one out, the new one fit superbly. The next time I will definitely put foil or an oven liner on the bottom rack to catch the drips from the pies as the Aqua-lift cleaning system on the Whirlpool oven did not do the job. Read more
Replace your range's door hinge if it's bent, warped, cracked, or broken. This metal bracket attaches the oven door to the frame for secure opening and closing.
Called repairman who said he could not fix it, which I did not believe. Read about issue on line and confirmed the issue to be hinges when disassembled. Ordered, easy replacement, and door works perfect. Did not use backing plates, but likely not worth returning due to freight. Great service by your team. Read more
Replace a cracked, broken, or missing burner control knob on your cooktop. This knob installs on the control panel to adjust burner heat settings.
If your range has a strong burning smell or won't power on, the terminal block may be heat-damaged. This insulated connector restores safe power flow.
Replaced it with the part I got from you. Read more
Replace a broken or fatigued oven door spring to restore proper counterbalance. Installs behind side panel. Ensures door closes firmly and seals correctly.
It was a simple fix. I removed the six screws holding the side panel on the range. Removed the broken parks of the spring. I use a screwdriver to help stretch the new spring into place. I then replaced the side panel and screwed it on. About ten minutes work. Read more
Fix a burner that won't light or clicks repeatedly with a new spark electrode. Creates the electrical arc that ignites gas at your cooktop burner.
I replaced all 4 ignitors and new clips. Read more
This small surface burner assembly replaces a worn or damaged top burner on your gas range or cooktop, restoring quick ignition and an even flame so the small burner heats predictably for simmering and everyday cooking.
You will need a special "star" socket driver for this process. You can find it at any auto parts retailer, I got mine at the AutoZone. First unscrew the 2 "star" screws and unplug the igniter lead from the old burner then plug the igniter lead into the new burner igniter and re-screw the new burner back on the range. It was a very easy swap out process. In the process, I broke one of the screw... this is the hard part of all trying to remove the broken screw. Remember to soak the screws... Read more
Microwave has no power or won't start? A faulty cavity thermostat often causes complete shutdowns. This part restores temperature control in 5-10 minutes.
I attempted to diagnose the four thermostats/thermal switches in the microwave....two right behind the control panel, one on top of the cooking cabin, and one under a metal shroud above the magnetron. While checking continuity with a voltmeter, i questioned one of them behind the control panel and the one above the magnetron. I then noticed a burn mark on the plastic connector sleeve for the one above the magnetron. I took a scrap piece of 14 gage copper wire and beat the ends flat with a... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.