Need Help?
Call
Replace your range's door hinge if it's bent, warped, cracked, or broken. This metal bracket attaches the oven door to the frame for secure opening and closing.
Called repairman who said he could not fix it, which I did not believe. Read about issue on line and confirmed the issue to be hinges when disassembled. Ordered, easy replacement, and door works perfect. Did not use backing plates, but likely not worth returning due to freight. Great service by your team. Read more
Broil element burned out? This upper oven heating element restores intense top heat for browning and broiling. Easy DIY fix—unplug, remove screws, replace.
Easy fix, took out the screws and disconnected the element. Make sure you unplug the oven!! replaced it with the new elements. oven is working good. Read more
Replace a broken or fatigued oven door spring to restore proper counterbalance. Installs behind side panel. Ensures door closes firmly and seals correctly.
It was a simple fix. I removed the six screws holding the side panel on the range. Removed the broken parks of the spring. I use a screwdriver to help stretch the new spring into place. I then replaced the side panel and screwed it on. About ten minutes work. Read more
Burner won't heat or heats unevenly? This 8-inch coil surface element restores reliable cooking power to your range. Simple plug-in installation.
It's one of the easiest jobs in the world. It take longer to unwrap the parts than to install them. Looks great...works great. Easy, Done. Read more
White burner control knob for electric ranges. Replace if your stovetop knob is cracked, broken, worn, loose, or missing. Installs on the control panel.
Determined that the LF infinite control switch contacts for the burner indicator light were stuck closed. I replaced the control as well as the knob as the knob felt loose on the control. Read more
Black range door handle installs on the oven door. Replace if your original handle is cracked, broken, worn, or missing for a clean appearance.
Replaced the handle. Read more
Replacement surface burner base for gas ranges. Houses the gas outlet and supports the burner cap. Order when your original is cracked or damaged.
My Whirlpool stove had two power burners in the front. I don’t need two so I bought the same parts like the back burner. Your website explained that I need the burner valve also. My son changed it out with no problem. I received my order in one day! We watched the video so we were prepared. I recommend this website to anyone. Read more
Heat-resistant seal prevents heat loss around your oven door. Replace when frayed, cracked, or causing uneven baking. Verify fit with your model number.
Ordered oven door seal Part Number Y702338 (Whirlpool AP4291897) to replace the oven door seal on 30-year old Jenn-Air model S125 downdraft slide-in range. I called AppliancePartsPros and confirmed the part number, gathered my courage and asked my son-in-law to help. Thanks to another reviewer's suggestion, we placed a piece of wood about 3/4-inch thick between each of the door hinges and the frame of the oven before removing the door (to hold the hinges open and make it easy to put the door... Read more
If your gas range burners won't ignite or click continuously, the spark module may have failed. This repair typically takes 30-45 minutes.
Changed the spark module electronic board. I ordered part # AP5999387 (W10860916) Read more
Brass seal creates a leak-resistant joint in range burner tube connections. Replace when deformed or worn during line service to ensure safe operation.
Flip the burner facing down. Take out the seven screws that hold together the housing and the slip off the housing. Disconnect the igniter leads. Turn the burner clock wise from the opposite side your likely working. You'll get a better purchase there. Take the screws out of the old igniter, as they don't come in with the new igniter. Install the new igniter on to the new burner. Make sure that the igniter is poking all the way out of the whole in the burner. I found that the screws did... Read more
Oven not heating or baking unevenly? This lower bake element restores consistent bottom heat. Simple DIY repair—clips in and tightens in 5-10 minutes.
New part clipped right in. Tightened 2 screws and was done in 5 minutes. Read more
Replaces cracked, stained, or warped oven bottom panel in gas ranges. Covers burner assembly and provides smooth, cleanable floor surface. Easy install.
I ordered the new oven bottom from Appliance Parts Pros and within three days I had a brand new oven bottom. Took the old one out, the new one fit superbly. The next time I will definitely put foil or an oven liner on the bottom rack to catch the drips from the pies as the Aqua-lift cleaning system on the Whirlpool oven did not do the job. Read more
This terminal block provides an insulated, secure junction for incoming power or harness leads inside the appliance. Replacing a cracked, loose, or heat-damaged block restores a safe, reliable connection and helps prevent arcing or intermittent power.
I completely disassembled the entire unit sandblasted repainted with epoxy paint and reassembled. bought a few new parts and its like new again this unit is no longer available and its built into my boat. Read more
This small surface burner assembly replaces a worn or damaged top burner on your gas range or cooktop, restoring quick ignition and an even flame so the small burner heats predictably for simmering and everyday cooking.
You will need a special "star" socket driver for this process. You can find it at any auto parts retailer, I got mine at the AutoZone. First unscrew the 2 "star" screws and unplug the igniter lead from the old burner then plug the igniter lead into the new burner igniter and re-screw the new burner back on the range. It was a very easy swap out process. In the process, I broke one of the screw... this is the hard part of all trying to remove the broken screw. Remember to soak the screws... Read more
Replace your worn oven door gasket to restore a heat-resistant seal, stabilize temperature, and improve baking performance. Confirm fit with your model number.
Although I had difficulties finding the right part to order (never could find the model #s on the oven), somehow I found this part. It fits perfectly and was very easy to install. Thank you! Read more
Replace a cracked, heat-damaged, or loose light socket to restore safe illumination. Secures the bulb and connects to appliance wiring. Confirm fit.
Your part was a perfect replacement. Fixed in 30 minutes. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.