Maytag Impeller & Seal Kit

Remove upper and lower baskets for access. Remove 4 Torx screws holding drain/filter assembly, accessing last screw by rotating the water duct clockwise. Be sure to first un-clip the water duct at top and rear of dishwasher so that it can be moved. (Take the opportunity to remove accumulated deposits behind the water duct). Remove the drain/filter assembly and then remove the single screw holding the food chopper housing. Then remove the chopper assembly which is likely to be in pieces if it... Read more

• Noisy
• Will not drain

I had previously disassemble the pump assembly to find what I at first thought was an oddly shaped spring, which it was. What I learned by researching the parts was that the spring's odd shape was a result of something having gotten caught in the pump and jamming the impeller. After ordering the parts, I watched the "repair video" a few time and proceeded to remove and replaced the affected parts. Reassembly went pretty much as described with the one small glitch being the seating of the new... Read more

My dishwasher quit cleaning dishes and lost all pressure. The food screen would keep clogging up and I would have to take it out and clean it by hand. After putting a new impeller in, the "gears" on the impeller connected with the screen blades, the old impeller the "gears" were stripped off. And the new impeller comes with new seals, after taking old one out I noticed it wasn't long before my old seals would have started leaking. Very simple repair if you watch the great video that... Read more

I started by removing and cleaning the sump filter and drain adapter at the bottom of the tub. The manual said nothing about these filters, but they were almost completely clogged after 5 years of use and no cleaning. After reassembling with the cleaned filters, the problem persisted. I did some more research and found others said the food chopper had disintegrated and caused the same issue with the top rack not getting cleaned. I then pulled the dishwasher out and tipped it on its door to... Read more

Motor shaft was stripped, replaced with new shaft from Motor Seal Kit. Impeller was also cracked, so replaced it as well. I did run in to a small problem, the chopper blade was pressing against the metal grate on the piece that goes back over the motor seal. I spent about an hour messing with it, but thought maybe once it's all together it'll be fine. When you screw the impeller on, it pushes down the seals, which pushes down the chopper blade. Video on Motor Seal Kit page made it an... Read more

Ordered the replacement pump seal kit from AppliancePartsPros. I watched the online how-to video on their website. The impeller was slightly stuck on the motor shaft due to age but overall was amazed at how easy it was to repair. Thanks AplianePartsPros! Read more

Followed the instructions on the video you guys sent me. Read more

Minimal tools - nut driver and a torx screwdriver The only surprise was how fast the part was delivered. The speed of fulfillment I've experienced with APP has been an unexpected positive for each of my orders. Read more

Removed motor assembly from the pump, Placed Allen wrench in the motor shaft and unscrewed impeller, Replaced motor seal kit and replaced impeller. lined up a slot on volute with motor housing, set new chopper in place and slid back into the pump housing, and replaced screws. Read more

Changed the parts and the machine now is quiet and runs like new again. Read more