Microwave Handle

Genuine Whirlpool door handle that restores a secure grip and the appliance's original appearance, making it easier to open and close the door while replacing cracked, broken, or missing handles. What it does

• Provides a firm, ergonomic pull for opening and closing the appliance door.
• Replaces cracked, broken, loose, or missing handles that cause wobble or difficulty opening.
• Restores the door's original fit and appearance for a cleaner, finished look.
• Durable construction resists everyday wear and returns the intended function of the door.

• Safety first: disconnect power (and water supply for units with dispensers) before starting any repair.
• Remove old handle by loosening visible screws or releasing mounting clips; keep any original fasteners if they are reusable.
• Align handle mounting tabs or screw holes, then secure evenly—do not overtighten fasteners to avoid cracking the handle.

This genuine replacement door handle restores a secure grip and smooth operation to your appliance door. It replaces a worn, cracked, or broken handle so you can open and close the door safely and comfortably. What it does:

• Provides a sturdy handhold for opening and closing the appliance door
• Replaces cracked, loose, or broken handles that cause difficulty operating the door
• Restores proper alignment and fit where the original handle has worn or failed
• Helps reduce accidental slippage or dropping of the door during use

• One door handle

• Handle requires basic hand tools for removal and installation; refer to your model's service instructions
• Keep the appliance unplugged or power disconnected when working near electrical components
• Tighten mounting fasteners securely but avoid over-torquing to prevent cracking
• If the handle mounts to an inner door panel or trim, support the door edge to avoid damage during installation

A white replacement door handle that restores a usable grip and appearance to your appliance door. Ideal when the original handle is cracked, loose, or missing so the door can be opened and closed reliably. What it does:

• Provides a secure grip for opening and closing the appliance door.
• Replaces cracked, broken, loose or missing handles that make the door difficult to operate.
• Matches original mounting points for a direct-fit replacement.
• Restores the door's finished appearance and basic function.

• Disconnect power (and water, if applicable) before beginning any repair.
• Access the handle mounting screws by opening/removing the door panel per the OEM service instructions.
• Use basic hand tools and retain all original fasteners and trim for reassembly.

Color: Stainless

This genuine Whirlpool door handle provides a secure grip for opening and closing your refrigerator door, restoring proper function and appearance. It replaces a cracked, broken, loose, or worn handle to improve everyday use. What it does:

• Replaces a damaged or worn refrigerator door handle to restore a solid grip.
• Prevents further cracking or separation that can catch on clothing or hands.
• Helps the door open and close smoothly when fastened correctly.
• Reduces wobble or looseness that may occur from stripped or missing fasteners.

• One refrigerator door handle

• High-level replacement — follow your refrigerator's service manual for specific fastener locations and procedures.
• Remove food and door-mounted items as needed; support the door during removal and reinstallation.
• Use appropriate hand tools; avoid overtightening fasteners to prevent handle damage.

The Handle Assembly is an OEM part for GE microwaves. It is used to provide a secure grip for opening and closing the microwave door, ensuring easy and safe access to the microwave interior.

You should replace this handle assembly if it becomes damaged or worn out. Common causes of a bad handle assembly include repeated use leading to wear and tear, accidental impact causing cracks or breaks, or exposure to high heat that can weaken the material.

Symptoms of a bad handle assembly include:

• Difficulty in opening or closing the microwave door
• The handle feeling loose or wobbly
• Visible cracks or breaks in the handle
• The handle detaching from the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Color: Black. For white order 5304440324. For bisque order 5304440325. For stainless order 5304461371.

Color: Stainless. For black order W10246505. For white order W10295692.

This microwave door handle provides a solid, comfortable grip to open and close the door. Replace a cracked or loose handle to restore easy access and keep the door operating as intended.

• Provides the pull point for opening and closing the door
• Helps ensure a secure grip and smooth door operation
• Common failure signs: broken or missing handle, cracked mounting posts, loose/wobbling handle, door hard to open
• Restores the appliance's appearance and usability

• Disconnect power to the appliance and allow it to cool before starting
• Access the mounting screws from inside the door by removing the inner trim as directed in your model's service information
• Transfer any end caps or trim pieces from the old handle if applicable
• Tighten screws evenly and verify proper door alignment and latch operation

This replacement door handle restores a secure grip and makes opening the appliance door easier and safer. It's a direct-fit style designed to match the original part's shape and function for a clean, factory look. What it does:

• Provides a sturdy grip for opening and closing the appliance door
• Replaces cracked, loose, or broken handles that affect door use
• Helps restore proper alignment and ergonomics when the original handle is damaged
• Reduces the risk of sharp edges or failure from a compromised handle

• Disconnect power to the appliance before starting any repair
• Typical installation requires removing a few screws or clips; keep fasteners for reassembly
• Use hand tools only and avoid overtightening screws to prevent stress cracks

This replacement door handle restores a secure, comfortable grip for opening and closing your appliance door. Swap a cracked or loose handle to improve safety, function, and appearance. What it does:

• Provides the handhold needed to open and close the door safely
• Replaces cracked, broken, or wobbly handles
• Helps prevent further door damage from a loose or missing handle
• Common symptoms include a loose handle, broken posts, or difficulty opening the door due to handle failure

• Includes 1 door handle

• Disconnect power to the appliance before servicing; allow hot surfaces to cool
• Support the door and protect glass/finishes while working
• Use correct tools for the mounting screws; transfer any existing trim as needed
• Tighten hardware snugly without overtightening to avoid damage

This door handle replaces a worn, cracked, or missing handle to restore a secure grip and smooth door operation. Refresh the look of your appliance and get back to reliable, comfortable opening and closing with a factory-fit replacement.

• Provides a solid handhold for opening and closing the door
• Restores proper fit when the original handle is loose, cracked, or missing
• Helps resolve difficulty opening the door or a handle that wobbles or falls off
• Matches original mounting points for straightforward replacement

• Disconnect power (and gas, if applicable) before servicing
• Support the door and access mounting fasteners
• Transfer any handle trim/brackets as needed and reuse existing fasteners
• Do not overtighten, especially on glass or decorative panels; confirm alignment and test operation

Handle assembly replaces a damaged oven door handle to restore a secure, comfortable grip for opening and closing the door. Matches OEM fit to keep the door operating safely and reliably.

• Provides a sturdy grip for opening and closing the oven door
• Replaces cracked, loose, bent, or missing handles that affect safe access
• Restores proper mounting and alignment of the door handle for everyday use
• Fits OEM mounting points for a straight swap with the original part

• Always disconnect power and allow the appliance to cool before working on the door
• Handle installs using the door's existing fasteners; keep original screws or verify correct replacements

This replacement door handle restores a secure grip for opening and closing your appliance door. It replaces a cracked, loose, or broken handle to improve daily use and keep the door functioning safely and confidently. What it does:

• Provides a sturdy grip for opening and closing the appliance door
• Replaces cracked, chipped, bent, or otherwise damaged handles
• Stops wobbling or loose movement caused by worn mounting points
• Helps prevent accidental drops or door damage from a failing handle

• Disconnect power to the appliance before starting any repair to avoid electrical or injury risk
• Typically installs with the original mounting screws or clips; keep existing fasteners and align the handle before tightening
• Use basic hand tools (screwdriver) and avoid overtightening to prevent stripping or cracking
• If trim or door panels must be removed, keep small parts organized and follow manufacturer instructions