Parts for Ge DVM1850SM3SS: 01 - Microwave Parts

Complete microwave door assembly that installs on the front of your unit. Order a replacement if your current door is cracked, damaged, or no longer seals.

Replace your microwave's outer door screen glass when cracked or broken. Maintains proper shielding and door function. Verify fit with your model number.

Complete microwave door assembly that replaces cracked, broken, or damaged doors. Includes door frame and glass. Restores proper seal and appearance.

Complete door assembly for your microwave. Replaces cracked, broken, or damaged doors. Includes outer panel and necessary components for installation.

Replacement spring for microwave control panel keys. Installs behind keypad buttons to provide tactile response. Order if your spring is broken or missing.

Replace your microwave's door hinge pin if the original is broken, bent, or missing. This small rod secures the door hinge assembly for smooth operation.

Replace your microwave's bottom base panel if it's cracked, rusted, or structurally damaged. This cabinet component supports internal parts.

Clear glass lens cover for over-the-range microwave cooktop light. Shields bulb from grease and splatters. Replace if cracked, broken, or missing.

Replacement glass lens cover for microwave interior or cooktop lights. Protects bulb from food splatters. Needed when cracked, broken, or shattered.

Illuminates your microwave interior for monitoring food during cooking. Replace when bulb burns out or dims. Verify fit with your model number before ordering.

Holds the light bulb securely in your microwave for proper interior illumination. Replace if bulb won't stay in place, socket is burned or cracked.

Secures the stirrer blade in your microwave for even heating. Replace if stirrer rattles or food heats unevenly. Confirm fit with your model number.

The Turntable Coupler is an OEM part for GE microwaves. It connects the microwave's turntable motor to the glass tray, enabling the tray to rotate during cooking. This rotation ensures even heating and cooking of food items placed on the tray.

Causes of a bad turntable coupler can include regular wear and tear, physical damage from heavy or improperly placed items, or overheating due to prolonged use.

Symptoms of a bad turntable coupler include:

• Turntable not rotating
• Uneven heating or cooking of food
• Grinding or clicking noises during operation
• The coupler being visibly damaged or worn

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Supports the removable wire rack inside your microwave cavity. Replace this holder if cracked, broken, or missing to restore stable two-level cooking capability.

Microwave turntable not turning? The turntable motor rotates the glass tray for even heating. Simple DIY repair with basic tools in under an hour.

Fixes loud grinding or coffee grinder noise from microwave. Simple DIY repair with 2 screws and wire connectors. Located on top, typically takes under 30 minutes.

Flange nut for microwave magnetron mounting. Replace this hex nut if stripped, missing, or damaged during magnetron removal or appliance maintenance.

Replaces cracked, warped, or damaged upper exhaust duct in your microwave. Directs airflow between vent area and exterior exhaust system for proper ventilation.

Replace your microwave's halogen light bulb when interior lighting dims or fails. Restores visibility for monitoring cooking. Verify fit with your model.

Protective cover for your microwave's interior halogen lamp. Replace if cracked, broken, or missing to shield the bulb and maintain safe operation.

Fix sensor cook cycles that won't adjust properly or show sensor errors. This humidity sensor monitors moisture levels for automatic cooking adjustments.

Wire harness for microwaves. Connects electrical components inside the unit. Replace if wires are damaged, frayed, or connections are loose or broken.

Secures the temperature sensor in your microwave. Replace if sensor is loose, misaligned, or causing erratic heating. Confirm fit with your model number.

Microwave not heating but still running? The magnetron converts electricity into microwave energy. DIYers report 1-hour installs with proper safety.

This mounting bracket secures the appliance control console or related components, restoring stable panel alignment and preventing excess movement. It's a simple replacement that helps keep controls properly positioned for reliable operation. What it does:

• Provides structural support for the control console or adjacent assemblies
• Keeps the control panel aligned to prevent loose or sagging controls
• Reduces vibration and movement that can cause button or switch misalignment
• Restores factory mounting points for safe, secure operation

• One mounting bracket

• High-level replacement; basic hand tools are typically required
• Disconnect power to the appliance before beginning any work
• Retain original fasteners unless the OEM kit explicitly includes replacements

Air guide assembly for microwaves. Directs airflow through the vent system. Replace if cracked, broken, or missing to restore proper ventilation.

Replacement door latch body for microwaves. Secures the door closed during operation. Install when original latch is cracked, broken, or won't hold door.

Replacement door latch lever bracket for microwaves. Installs behind the control panel to hold interlock switches. Needed when bracket is cracked or broken.

Microwave won't stop running or starts when door closes? A faulty door switch is likely the cause. This safety switch is a 45-minute DIY fix.

Microwave won't start or heat but light works and timer counts down? A faulty monitor switch is often the cause. DIY repair typically under 30 minutes.

Fixes microwaves with motors that start slowly or make abnormal noise. This run capacitor stores electrical energy to help motors start and run smoothly.

Fix a microwave that won't heat or hums but doesn't start. This capacitor stores energy for the high-voltage circuit. Moderate DIY repair, 30-60 minutes.

Microwave not heating but lights and timer work? The high voltage diode converts AC to DC for the magnetron. DIY repair in 1-2 hours with basic tools.

Rear exhaust duct assembly channels airflow at the back of your microwave. Replace if cracked, rusted, or damaged to restore proper ventilation routing.

Fix a microwave that stopped heating or made a loud noise. This high voltage transformer powers the magnetron. Moderate DIY repair for experienced users.

Fix a microwave with no power or intermittent shutoffs. This thermostat monitors temperature and protects internal components. DIY repair in 20 minutes.

Wire harness for microwaves. Connects electrical components inside the unit. Replace if wires are damaged, frayed, burnt, or connections are loose.

Replace your microwave's power cord assembly if damaged, frayed, or missing. Connects the unit to your wall outlet for safe electrical operation.

Outer case guard for microwaves. Protects internal components and provides structural support. Replace if cracked, damaged, or missing during repairs.

Secures the power cord to your microwave's chassis. Replace this bracket if it's cracked, broken, or missing to properly mount and support the cord.

Secures microwave to wall cabinet mounting bracket. Replace if cracked, stripped, or missing to restore proper cabinet installation and stability.

Upper duct bracket assembly for over-the-range microwaves. Secures ventilation ductwork to the cabinet. Replace if bent, broken, or missing hardware.

Microwave not venting or overheating? This vent fan motor restores proper airflow and exhaust. Moderate difficulty repair requiring basic tools.

Controls exhaust airflow in over-the-range microwaves. Replaces bent, damaged, or missing damper assemblies for proper external venting installation.

Plastic cover that fits over the air damper assembly to help direct airflow. Replace if your original cover is cracked, broken, worn, or missing.

Color: brown. Measures about 9 inches in diameter.

Replacement glass turntable tray for microwaves. Rotates during cooking to heat food evenly. Order a new tray if yours is cracked, chipped, or broken.

Traps grease, smoke, and odors from your microwave's ventilation system. Replace when clogged or damaged. Verify fit with your model number.

Wire rack assembly for microwave ovens. Provides a removable shelf for multi-level cooking. Replace if bent, damaged, or missing to restore proper placement.

Charcoal filter removes grease and cooking odors in over-the-range microwaves. Replace when clogged or after 6 months. Verify fit by model number.

Washered screw secures panels, brackets, and internal microwave components. Replace if screw is missing, stripped, or damaged to restore proper fit.

Complete microwave door assembly in stainless steel finish. Replaces cracked, broken, or damaged doors. Includes handle and window for full door replacement.

This stainless-finish grille assembly mounts across the top front of the microwave to cover the vent opening and complete the look. Replacing a cracked, loose, or missing grille helps maintain airflow and restores a clean, finished appearance.

• Covers the front vent intake and helps direct airflow through the microwave's ventilation path
• Protects internal components while providing a factory-finished look
• Attaches with screws across the top front; removal provides access to the air filter on many models
• Replace when cracked, warped, tabs are broken, rattling occurs, or the grille no longer stays secured

• Disconnect power at the breaker or unplug before servicing
• Support the grille while removing/installing the mounting screws to prevent dropping or damage
• Reuse existing screws/clips unless your model specifies new hardware
• Align tabs carefully and avoid overtightening to prevent cracking

Flat bolt fastener for securing microwave to cabinets or wall brackets. Replace missing, stripped, or corroded mounting hardware to restore secure installation.

Decorative inlay panel for microwave door exterior. Replaces cracked, scratched, or discolored panels. Installs on door front for a clean finish.

Support plate that mounts and secures the power control module inside your microwave. Replace if cracked, broken, or missing to properly hold the control board.

Lamp bracket for microwave interior lighting assembly. Secures the bulb housing in place. Replace if bracket is cracked, broken, or missing.

This stainless-finish grille assembly mounts across the top front of the microwave to cover the vent opening and complete the look. Replacing a cracked, loose, or missing grille helps maintain airflow and restores a clean, finished appearance.

• Covers the front vent intake and helps direct airflow through the microwave's ventilation path
• Protects internal components while providing a factory-finished look
• Attaches with screws across the top front; removal provides access to the air filter on many models
• Replace when cracked, warped, tabs are broken, rattling occurs, or the grille no longer stays secured

• Disconnect power at the breaker or unplug before servicing
• Support the grille while removing/installing the mounting screws to prevent dropping or damage
• Reuse existing screws/clips unless your model specifies new hardware
• Align tabs carefully and avoid overtightening to prevent cracking