Parts for Ge JVM1540DN2BB: 01 - Microwave Parts

The Handle Assembly is an OEM replacement part for GE microwaves. This assembly includes a handle used for opening and closing the microwave door. A properly functioning handle assembly provides safe and easy access to the microwave interior for loading and unloading food items.

Causes of a bad handle assembly can include damage from excess weight or stress on the handles during operation, cracks or breaks from normal usage over time, or issues affecting their usability.

Symptoms of a bad handle assembly include:

• Loose, unstable, or wobbly handles that feel unsafe to grip
• Difficulty opening or closing the microwave door
• Inability to fully access the microwave interior

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

Holds the light bulb securely in your microwave for proper interior illumination. Replace if bulb won't stay in place, socket is burned or cracked.

Illuminates your microwave interior for monitoring food during cooking. Replace when bulb burns out or dims. Verify fit with your model number before ordering.

Traps grease, smoke, and odors from your microwave's ventilation system. Replace when clogged or damaged. Verify fit with your model number.

Replacement glass lens cover for microwave interior or cooktop lights. Protects bulb from food splatters. Needed when cracked, broken, or shattered.

Glass light cover for microwave cooktop lights. Shields and diffuses bulb from heat, grease, and splatter. Replace if cracked, broken, or missing.

Clear glass lens cover for over-the-range microwave cooktop light. Shields bulb from grease and splatters. Replace if cracked, broken, or missing.

Fixes microwaves with motors that start slowly or make abnormal noise. This run capacitor stores electrical energy to help motors start and run smoothly.

Replacement door latch body for microwaves. Secures the door closed during operation. Install when original latch is cracked, broken, or won't hold door.

Microwave won't stop running or starts when door closes? A faulty door switch is likely the cause. This safety switch is a 45-minute DIY fix.

Microwave won't start or heat but light works and timer counts down? A faulty monitor switch is often the cause. DIY repair typically under 30 minutes.

Replacement door latch lever bracket for microwaves. Installs behind the control panel to hold interlock switches. Needed when bracket is cracked or broken.

Secures the stirrer blade in your microwave for even heating. Replace if stirrer rattles or food heats unevenly. Confirm fit with your model number.

Fix uneven heating or rattling noise in your microwave. This stirrer assembly distributes microwave energy evenly. Requires removing outer cover to install.

Protects the stirrer blade antenna in your microwave cavity. Replace this cover if it's cracked, melted, broken, or missing to prevent food debris damage.

Plastic coupling gear that connects the motor shaft to the glass turntable. Replace if cracked, broken, or worn to restore turntable rotation.

Turntable stopped rotating or making grinding noise? Replace the turntable motor to restore smooth tray rotation. DIY repair in under 15 minutes.

Secures the microwave air guide or duct in proper position. Replace if your bracket is cracked, broken, or missing to restore stable internal airflow.

Microwave won't turn on or is completely dead? A blown fuse is often the cause. This safety fuse protects against power surges. Easy 5-minute DIY fix.

Fix a microwave that won't heat or makes loud humming noises. This high voltage capacitor often fails when the magnetron can't generate heat properly.

Microwave not heating but lights and timer work? The high voltage diode converts AC to DC for the magnetron. DIY repair in 1-2 hours with basic tools.

Mounting bracket for microwave ovens. Secures the unit to the wall or cabinet. Replace if bent, broken, or missing during installation or repair.

Plastic cover that fits over the air damper assembly to help direct airflow. Replace if your original cover is cracked, broken, worn, or missing.

Controls exhaust airflow in over-the-range microwaves. Replaces bent, damaged, or missing damper assemblies for proper external venting installation.

Secures microwave to wall cabinet mounting bracket. Replace if cracked, stripped, or missing to restore proper cabinet installation and stability.

Secures the power cord to your microwave's chassis. Replace this bracket if it's cracked, broken, or missing to properly mount and support the cord.

Replace your microwave's power cord assembly if damaged, frayed, or missing. Connects the unit to your wall outlet for safe electrical operation.

This outer case is the black outer housing panel that covers and protects the appliance's internal components while restoring the unit's finished appearance. It provides a replacement exterior panel when the original is cracked, dented, or cosmetically worn. What it does:

• Replaces a cracked, dented, or damaged outer housing panel to restore appearance
• Protects internal components from dust, debris, and incidental contact
• Stops rattling or shifting caused by a broken or loose outer panel
• Helps maintain proper airflow paths by restoring original panel fit

• Disconnect power to the appliance before beginning any repair
• Removal and installation typically require basic hand tools; retain all fasteners
• Handle edges carefully—metal or molded edges may be sharp

White outer case guard for microwaves. Protects internal components and provides structural support. Replace if cracked, broken, or discolored.

This ventilation motor circulates exhaust and cooling air inside your oven or range, helping maintain proper airflow for safe operation and consistent cooking performance. It replaces a worn or failed blower motor to restore ventilation. What it does:

• Spins the blower to move air through the appliance housing and vent channels
• Helps cool internal components and reduce overheating during use
• Restores proper oven exhaust and ventilation when the original motor is noisy or not running
• Can eliminate humming, grinding, or no-spin symptoms caused by a failed motor

• Disconnect power to the appliance before starting any repair
• Handle the motor and wiring carefully; match connector type and mounting orientation
• Some disassembly of the rear or bottom panel may be required

Fixes loud grinding or coffee grinder noise from microwave. Simple DIY repair with 2 screws and wire connectors. Located on top, typically takes under 30 minutes.

Microwave shuts down during use? This thermal cutoff thermostat prevents overheating by interrupting power when temperatures exceed safe limits.

Upper duct assembly for microwave ventilation systems. Mounts inside the cabinet to direct air flow. Replace if cracked, damaged, or missing components.

Flange nut for microwave magnetron mounting. Replace this hex nut if stripped, missing, or damaged during magnetron removal or appliance maintenance.

Microwave not heating food? A failed magnetron is the most common cause. This high-voltage tube generates microwave energy to heat and cook food properly.

Microwave not heating food? This high voltage transformer powers the magnetron to generate heat. Moderate DIY repair restores cooking performance.

Replacement base plate for your microwave. Mounts inside the cavity to support internal components. Needed when original is cracked, warped, or damaged.

Fix a microwave with no power or intermittent shutoffs. This thermostat monitors temperature and protects internal components. DIY repair in 20 minutes.

Microwave shuts off after a few minutes? A failed magnetron cooling fan causes overheating and thermal cutout trips. Moderate DIY repair restores function.

Charcoal filter removes smoke, odors, and grease in non-vented microwaves. Replace when odors persist or airflow weakens. Confirm fit by model number.

Supports and guides the glass turntable in your microwave. Replace if the roller ring is cracked, broken, wheels are worn or missing, or the tray wobbles.

Replace your cracked, broken, or missing microwave glass cooking tray. This rotating turntable supports food for even heating in your microwave cavity.

Washered screw secures panels, brackets, and internal microwave components. Replace if screw is missing, stripped, or damaged to restore proper fit.

Flat bolt fastener for securing microwave to cabinets or wall brackets. Replace missing, stripped, or corroded mounting hardware to restore secure installation.

Fix uneven heating or rattling noise in your microwave. This stirrer assembly distributes microwave energy evenly. Requires removing outer cover to install.

Complete microwave door assembly that replaces a cracked, dented, or worn door. Includes outer panel, inner liner, and mounting points for hardware.

Replace a cracked, damaged, or unresponsive microwave control panel assembly. Restores secure fit and access to touchpad, display, and switches.

Front trim grille for microwaves. Covers the gap between cavity and control panel, restoring a finished look. Replace if cracked, broken, or missing.

Direct replacement noise filter assembly for microwaves. Reduces electrical interference. Replace if cracked, damaged, or missing to restore clean power.

Support plate that mounts and secures the power control module inside your microwave. Replace if cracked, broken, or missing to properly hold the control board.

Lamp bracket for microwave interior lighting assembly. Secures the bulb housing in place. Replace if bracket is cracked, broken, or missing.

Cosmetic badge logo for your microwave door or control panel. Replace this emblem if the original is cracked, faded, peeling, or missing to restore appearance.