Mtd Parts

This part is a spark plug that is used on a number of lawn and garden power equipment. A spark plug is used as part of an internal combustion engine. The spark plug delivers the electric current from the ignition system to the engine.A new spark plug may be needed after normal wear and tear over a period of time. The operator of the outdoor power equipment may notice that the engine misfires or it is difficult to start. If this is the case, a new spark plug will be needed. Never perform care and maintenance on outdoor power equipment that is powered on. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This spark plug is a genuine MTD part. It is sold individually. This particular spark plug is compatible with various outdoor power equipment that are manufactured by MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Cub Cadet.

Replacement edger blade for cutting grass and weeds along concrete and landscape edges. Replace when blade becomes dull, damaged, or worn from ground contact.

This part is an adjustable gib that is used on log splitters and chipper shredders. This component is also called a keyway. The adjustable gib locks two shafts together so that they can rotate.A new adjustable gib may be needed if the shaft is freely spinning and will not spin with the drive shaft. If the adjustable gib is cracked, broken, or damaged in any way, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This adjustable gib is a genuine MTD part. It is sold individually. This specific adjustable gib is compatible with log splitters and chipper shredders that are manufactured by MTD, Yard Machines, Cub Cadet, Yard-Man, Husky, and Troy-Bilt.

Protective belt guard cover for edgers and lawn equipment. Shields belt and drive components from debris. Replace if cracked, broken, or missing.

Replacement screen blade for chipper shredders. Controls shred size and protects engine components. Replace if cracked, damaged, or broken from debris impact.

The tri-cut blade works to replace edger blades to ensure they are sharp and capable of cutting through the grass and turf properly. The blade is made from metal and can provide users with clean edging around the edges of their lawn and around flower beds. Regularly examine the edger blade regularly to ensure that it is not bent, broken, or otherwise damaged. If your current edger blade is no longer sharp and cannot be sharpened, it is time for a replacement. Without a sharp blade for the edger, it will be impossible to take care of the lawn properly. To replace the blade in your edger, the only tool required is a wrench. Replacing the blade is easy, and it should not take more than 15 minutes. This OEM part is sold individually, and it works with edgers from a range of brands, including Craftsman, Yard Machines, MTD, Troy-Bilt, Bolens, and Yard-Man.

Metal height adjustment plate for walk-behind mowers. Mounts to wheel assembly to adjust cutting height. Replace if cracked, bent, or stripped threads.

This genuine MTD shave plate, also known as a scraper bar, can be used as a replacement part for snowblowers. The shave plate is located at the bottom of the auger to scrape snow off of surfaces and filter it into the auger of the snowblower.Damage to the shave plate might include cracks, dents, and erosion to the metal material, or it can gradually wear out and no longer be effective. Evidence of a cracked shave plate can come from a visual inspection, but it can also be detected if the snowblower is doing a poor job of collecting and scraping snow off of surfaces. A cracked shave plate should be removed and replaced immediately, and a snowblower should not be used before the part is replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This shave plate is compatible with the following brands: MTD, Yard Machines, Cub Cadet, Yard Man, and Craftsman. Part sold individually.

This carburetor O-ring creates an airtight seal between carburetor components to prevent fuel and air leaks in small engines. It maintains proper fuel mixture and prevents contamination that could affect engine performance. Replace it when you notice fuel leaks around the carburetor, poor engine performance, or difficulty starting your equipment.

This air filter is the replacement part for specific tillers, edgers, and cultivators. Its main function is to prevent grime and debris from reaching the engine and carburetor. With time and use, air filters get dirty and may become clogged or damaged. Replacing the air filter regularly encourages adequate air flow to the engine, which reduces engine wear, and increases the longevity of the machine. Replacement is simple and can be done in a matter of minutes. With a screwdriver, remove the old air filter, and install this new, clean filter. Be sure to check the owners manual for proper installation techniques, as it varies by brand and machine. This air filter, made of foam, is a genuine OEM part. It is sold as an individual unit. It is compatible with tillers, edgers and cultivators made by the Ryobi, Troy-Bilt, and Yardman brands. All engines need regular care and maintenance to perform optimally. To ensure the Tiller, Edger, or Cultivator model starts easily, maintains power, functions properly, and has a long, hard-working life, the air filter should be replaced routinely.

Snowblower won't move or loses power? This transmission reduction gear housing restores drive function. Moderate DIY repair for common drive issues.

If your log splitter won't engage or makes grinding noises, the flexible coupling may be worn. Connects engine to pump. Moderate DIY repair (1-2 hours).