Kenmore Dryer 417.92142101 (41792142101, 417 92142101) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 134503600
The Dryer Drum Belt is an OEM replacement part designed for use with Frigidaire dryers. This critical component is responsible for turning the drum of your dryer, allowing your clothes to tumble freely and dry evenly.
Causes of a bad Dryer Drum Belt can include wear and tear from regular use, overloading the dryer, which puts extra strain on the belt, or exposure to excessive heat, which can cause the belt to become brittle and break.
Symptoms of a bad Dryer Drum Belt include:
- The dryer motor running but the drum not turning
- Unusual noises, such as thumping or squealing, coming from the dryer when it is running
- The dryer not starting at all, in some cases
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models, ensuring a wide range of users can benefit from its reliable operation.
NOTE: Please note that this dryer drum belt is sold individually. Any additional parts or hardware will require additional purchases.
Do-It-Yourself Stories from Customers like You
After 7 years of quiet service the dryer drum started squeaking very loud! Douglas D. • Columbia , MO • March 08, 2016
I found a video on Youtube which described dryer drum squeaks as most likely caused by a worn rear drum bearing.
I located the model number on the inside lip of the dryer door: Frigidaire Affinity LEQ6000ES2. I googled "frigidaire affinity dryer squeak". I got a link for my friends at AppliancePartsPros.com! I've used Appliance PartsPros 3 times before, so I figured I was in a "one-stop-solution" situation.
I ordered a rear drum bearing kit as well as a dryer drum belt (after nearly 7 years...
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281153
The Rear Drum Bearing Kit is an OEM replacement part for Frigidaire dryers. It contains a set of parts responsible for supporting the rear end of the dryer drum, allowing it to rotate smoothly and efficiently during the drying cycle.
Symptoms of a faulty Rear Drum Bearing Kit include:
- Excessive noise or grinding sounds coming from the rear of the dryer
- Difficulty in rotating the drum or drum not turning at all
- Visible signs of wear or damage on the existing bearings
- Increased vibrations or shaking during the drying cycle
Causes of needing to replace the rear drum bearing kit can include normal wear and tear over time, exposure to excessive heat or lint buildup, or physical damage due to impact or overloading.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryer models.
NOTE: The metal plate holes are not threaded. Use the self-tapping screws provided in the kit to thread the plate.
This part fixes the following symptoms
-
Noisy
-
No heat or not enough heat
-
Marks left on clothes
See more...
Do-It-Yourself Stories from Customers like You
After 7 years of quiet service the dryer drum started squeaking very loud! Douglas D. • Columbia , MO • March 08, 2016
I found a video on Youtube which described dryer drum squeaks as most likely caused by a worn rear drum bearing.
I located the model number on the inside lip of the dryer door: Frigidaire Affinity LEQ6000ES2. I googled "frigidaire affinity dryer squeak". I got a link for my friends at AppliancePartsPros.com! I've used Appliance PartsPros 3 times before, so I figured I was in a "one-stop-solution" situation.
I ordered a rear drum bearing kit as well as a dryer drum belt (after nearly 7 years...
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Frigidaire part
By: Frigidaire
Part Number: 131825900
The Dryer Drum Bearing is an OEM part for Frigidaire dryers. It supports the dryer drum, ensuring smooth rotation during the drying cycle. This part attaches to the inside of the rear panel of the cabinet, offering support to the dryer drum.
You should replace the drum bearing if it becomes worn out or damaged. Causes of a bad drum bearing can include normal wear and tear, overloading the dryer, or lack of lubrication.
Symptoms of a bad drum bearing include:
- Loud squeaking or grinding noises during operation
- The drum not turning smoothly or becoming misaligned
- Increased friction causing overheating or burning smells
- The dryer not tumbling clothes properly
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Marks left on clothes
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Dryer would not turn on Kathie R. • Burlington , WI • January 15, 2016
The dryer is a Kenmore Laundry Center, model 417-99570150. Bought in 1998, so it is an older model. Not wanting to buy the newer ones that are out now. We opted to fix the Kenmore. Just believe the older models are worth fixing, if at all possible.
Frist we had to figure out what parts we would need and if the cost would be worth our time. I went on YouTube: and type in Kenmore dryer not turning on. Watched several videos to narrow down the possible problem.
Next step was to...
Read more
More
$9.95
- Compare At:
-
$11.94
- You Save:
-
$1.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 137513300
The Drum Glide is an OEM part for Frigidaire dryers. It is designed to support the front of the dryer drum as it rotates, allowing the drum to turn smoothly with minimal friction and noise. This is a single glide. Your dryer uses two so it is recommended to replace both at the same time.
Causes of a bad drum glide can include wear and tear from regular use, excessive loads that put undue strain on the drum and its components, or accumulation of lint and debris that can interfere with the glide's movement.
Symptoms of a bad Drum Glide can include:
- Unusual noises, such as screeching or squealing, during operation
- Increased difficulty in turning the drum, leading to longer drying times or incomplete cycles
- Visible wear or damage to the glide itself, indicating it is time for a replacement
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018
The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts.
Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum...
Read more
More
$24.95
- Compare At:
-
$29.69
- You Save:
-
$4.74
Genuine Frigidaire part
By: Frigidaire
Part Number: 131775600
The Blower Housing Assembly is an OEM part for Frigidaire dryers. It houses the blower wheel, which circulates air through the dryer drum and out the exhaust. This assembly ensures that hot air is efficiently directed through the dryer to dry clothes properly.
Over time, the blower housing assembly can become damaged or worn out, affecting the dryer's performance. Causes of a bad blower housing assembly can include accumulation of lint or debris, wear and tear from frequent use, or physical damage to the housing or blower wheel.
Symptoms of a bad Blower Housing Assembly include:
- Reduced or no airflow from the dryer vent
- Unusual noises during operation
- Clothes taking longer to dry
- Overheating or frequent cycling off of the dryer
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018
The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts.
Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum...
Read more
More
$104.95
- Compare At:
-
$125.94
- You Save:
-
$20.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303931775
The Dryer Gas Valve Coil Kit is an OEM part for Frigidaire dryers. This kit includes solenoid coils necessary for the opening and closing of the gas valve during the drying cycle. These coils are vital for controlling the flow of gas into the burner, enabling the ignition and maintaining the flame required to dry clothes effectively.
Symptoms of a bad Dryer Gas Valve Coil Kit include:
- No heat or insufficient heat in the dryer.
- The dryer stops heating partway through the cycle.
- A "clicking" noise when the dryer attempts to ignite the gas flame but fails.
- Gas smell from the dryer, indicating incomplete combustion.
Causes of a bad coil kit can include electrical failure within the coils, mechanical wear from repeated use, or overheating that damages the coil's integrity.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Our dryer didn't heat Larry L. • Poway , CA • November 10, 2014
Being a complete DIY I hate to call some unknown person into my home knowing that just to get them there will cost me more than I will spend for parts that I don't need.After all, they are trying to make a living and by selling me parts that I don't need will increase their profits.
I've dealt with APP before and was impressed by their site because I could find both mechanical and electrical drawings for almost everything I have.
I looked up my dryer, decided what was probably the problem,...
Read more
More
$23.95
- Compare At:
-
$34.51
- You Save:
-
$10.56
Genuine Frigidaire part
By: Frigidaire
Part Number: 131658800
The Door Catch is an OEM part for Frigidaire dryers. It secures the door closed during cycles. This allows the machine to safely run without the risk of the door opening, which could pause the drying process or pose a safety hazard. Constructed from durable materials, this door catch is designed to endure the frequent opening and closing of the dryer door, offering reliability and longevity.
Causes of a bad door catch include mechanical wear from regular use, accidental damage, or misalignment of the door.
Symptoms of a bad Door Catch include:
- The dryer door won't stay shut during cycles
- Difficulty closing the dryer door securely
- The need to apply extra force to close the door
- The dryer stops running due to the door opening mid-cycle
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
This part fixes the following symptoms
-
Door won't close
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018
The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts.
Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum...
Read more
More
$50.78
- Compare At:
-
$59.92
- You Save:
-
$9.14
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303937182
The Upper Felt Seal is an OEM part for Frigidaire dryers. It provides a seal between the dryer drum and the front panel, helping to retain heat and ensure efficient drying performance. This felt seal also minimizes friction between the drum and the front panel, reducing wear on the drum and the appliance itself. The seal measures approximately 16.5" long x 1" wide. The adhesive is included as well.
Causes of a bad upper felt seal can include wear and tear over time, exposure to high heat, or damage from foreign objects caught in the drum. A compromised felt seal can lead to inefficient drying and increased energy consumption.
Symptoms of a bad upper felt seal include:
- Clothes taking longer to dry
- Excessive lint accumulation inside the dryer
- Unusual noises during the drying cycle
- Visible damage or gaps in the felt seal
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Also available in maintenance kit: Part Number 5304457724.
Do-It-Yourself Stories from Customers like You
Dryer makes thumping noise when rotating and catching buttons zippers and snaps and ripping them off Rodney H. • Pike Road , AL • September 23, 2014
Replaced the upper and lower felt strips and drum glides. Dryer running much quieter and not tearing clothes.
Read more
More
$28.95
- Compare At:
-
$34.74
- You Save:
-
$5.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 134398300
The Turn Start Switch is an OEM part for Frigidaire dryers. It is responsible for initiating the drying cycle when the switch is turned. This switch is a critical component that engages the dryer’s motor and starts the drying process, ensuring your clothes are dried effectively.
You should replace the turn start switch if it becomes faulty or unresponsive. Causes of a bad start switch can include regular wear and tear from frequent use, electrical issues, or damage due to excessive force or mishandling.
Symptoms of a bad turn start switch include:
- Dryer not starting when the switch is turned
- Intermittent starting issues
- The switch feeling loose or not engaging properly
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Knob broke on dryer started using pliers to turn it on eventually the stem broke off the start switch Lisa I. • Cocoa , FL • December 13, 2015
Got the model number off the dryer. Looked it up online. I wanted name brand replacement part. Found this wonderful AppliancePartsPros.com. Looked up my model number, went to top control panel section, ordered the Start Switch. In ONE DAY I received it. Removed the back part of my dryer. Easily removed the broken part. (I did watch a video online). Put on the new Start Switch. Instead of ordering a new knob. I removed a knob from the dryer that I don't use. It turns a buzzer on or off to let...
Read more
More
$59.95
- Compare At:
-
$71.34
- You Save:
-
$11.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 131863007
The Idler Arm Pulley is an OEM part for Frigidaire dryers. This part keeps the belt aligned and tight, preventing slippage and contributing to consistent drum rotation.
Causes of a bad Idler Arm Pulley can range from normal wear and tear, which can degrade the pulley's material or bearings, to improper alignment that puts undue stress on the pulley, leading to premature failure.
Symptoms of a malfunctioning Idler Arm Pulley include:
- Unusual noises, such as squeaking or rumbling, indicating the pulley may be worn or loose
- The dryer drum failing to rotate, even though the motor is running
- Excessive wear or damage to the dryer belt
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018
The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts.
Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum...
Read more
More
$53.42
- Compare At:
-
$63.57
- You Save:
-
$10.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281135
The Dryer Heat Sensor is an OEM part for Frigidaire dryers. This sensor monitors the temperature inside the dryer drum to ensure clothes are dried effectively and safely by regulating the heat levels during the drying cycle.
Causes of a bad heat sensor can include wear and tear from frequent use, buildup of lint or debris, or electrical issues. A malfunctioning sensor can result in incorrect temperature readings, leading to under-drying or overheating of clothes.
Symptoms of a bad Dryer Heat Sensor include:
- Clothes not drying properly or taking too long to dry
- Dryer overheating or shutting off unexpectedly
- Inconsistent drying cycles
- Error codes related to temperature control
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Our dryer didn't heat Larry L. • Poway , CA • November 10, 2014
Being a complete DIY I hate to call some unknown person into my home knowing that just to get them there will cost me more than I will spend for parts that I don't need.After all, they are trying to make a living and by selling me parts that I don't need will increase their profits.
I've dealt with APP before and was impressed by their site because I could find both mechanical and electrical drawings for almost everything I have.
I looked up my dryer, decided what was probably the problem,...
Read more
More
$38.95
- Compare At:
-
$55.90
- You Save:
-
$16.95
Genuine Frigidaire part
By: Frigidaire
Part Number: 131777700
The Rear Drum Support Shaft is an OEM part for Frigidaire dryers, specifically designed to ensure the stability and smooth rotation of the dryer drum. This component plays a pivotal role in the dryer's operation by supporting the rear of the drum, allowing it to turn evenly and quietly during cycles. Note: The rear drum bearing kit is 5303281153.
The causes behind these issues often stem from normal wear and tear, excessive loads that strain the dryer's components, or lack of regular maintenance. Over time, the support shaft can wear down, become loose, or even corrode, leading to operational inefficiencies and potential damage to the dryer.
Symptoms of a failing Rear Drum Support Shaft include:
- Unusual noises, such as thumping or squeaking, during operation
- The dryer drum struggling to rotate or not rotating at all
- Increased wear on other components, such as the belt or motor, due to improper drum alignment
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer would not turn on Kathie R. • Burlington , WI • January 15, 2016
The dryer is a Kenmore Laundry Center, model 417-99570150. Bought in 1998, so it is an older model. Not wanting to buy the newer ones that are out now. We opted to fix the Kenmore. Just believe the older models are worth fixing, if at all possible.
Frist we had to figure out what parts we would need and if the cost would be worth our time. I went on YouTube: and type in Kenmore dryer not turning on. Watched several videos to narrow down the possible problem.
Next step was to...
Read more
More
$113.73
- Compare At:
-
$136.48
- You Save:
-
$22.75
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308027429
The High Temperature Adhesive is an OEM part for Frigidaire appliances. This adhesive is specifically formulated to withstand high temperatures and is used in various repair applications within appliances such as ovens, ranges, and dryers.The 1-ounce tube contains adhesive formulated to withstand the extreme heat inside dryer drums and cabinets
Causes of a bad adhesive can include exposure to extremely high temperatures over extended periods, contamination by dirt or grease, or the natural aging and drying out of the adhesive.
Symptoms of a bad high temperature adhesive include:
- Components or parts becoming loose or detached
- The adhesive becoming brittle or cracked
- Inability to properly bond surfaces exposed to high heat
- Visible deterioration or peeling of the adhesive
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Marks left on clothes
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Clothes getting stuck in front of dryer then later on a grinding and loud noise when spinning Michael G. • Chicago , IL • August 23, 2020
I'm new to how a dryer works, so I just started taking it apart to see what exactly was causing it. The video examples on the APP website were all amazing. It gave me a good idea of what I was getting into and showed me the common repair issues. The dryer being 12 years old, I was on the fence about repairing or replacing. However, once I got a list of parts I might need and getting the confidence by watching the videos, I said "what have I got to lose."
The cause of the scraping and loud...
Read more
More
$49.95
- Compare At:
-
$58.94
- You Save:
-
$8.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 134417000
The Dryer Seal is an OEM replacment part for Frigidaire dryers. It is located at the doorway opening where the drum rotates and helps prevent lint, moisture, and heat from escaping. The seal is a crucial component that ensures efficient drying and heat retention within the dryer drum.
Causes of a bad seal can include wear and tear over time from continuous use or damage due to mishandling. The nylon seal experiences a lot of friction and heat stress with each drying cycle.
Symptoms of a bad seal include:
- Increased drying time as heat escapes
- Excess lint and moisture accumulation inside dryer components
- Visibly worn or cracked seal edges
- Cool air leakage noticed around the door when the dryer is running
This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Felt/nylon "bearing" felt glide assembly for dryer drum front end support had worn nearly completely away Harlan D. • Warrenville , IL • November 19, 2014
Get some acetone at a Hardware Store before you start. A pint will do. Unplug the dryer from 110 VAC. Pull the top off of the dryer, by lifting it from the front first. It is attached with snap metal fittings. Do not completely remove the top, just tip upright to gain access to the front interior of the dryer. Before you pull any wires from the door switch, record which color wires go to which terminals on the door switch. If you reassemble the connections incorrectly, the gas value will...
Read more
More
$15.95
- Compare At:
-
$39.50
- You Save:
-
$23.55
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303307893
The High Temp Lubricant Tube is an OEM part for Frigidaire appliances, specifically designed to withstand and operate under high temperature conditions. This lubricant is essential for the proper maintenance and functionality of various Frigidaire appliances, offering protection against heat and friction.
Over time, the lubricant can degrade or become contaminated, which can compromise its effectiveness. Causes of a bad high temp lubricant include exposure to extreme temperatures, accumulation of dirt and debris, or simply the natural breakdown of the lubricant over prolonged use.
Symptoms of needing a new High Temp Lubricant Tube include:
- Increased noise during appliance operation
- Reduced efficiency or performance of the appliance
- Harder movement of parts that should glide smoothly
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The dryer was making a load screaching noise Stephen M. • Lees Summit , MO • January 04, 2016
Replaced the rear drum bearing assembly and the front top felt that the drum rides on and since I has it apart installed a new belt. Simple to do and takes very little time!
Read more
More
$39.95
- Compare At:
-
$47.54
- You Save:
-
$7.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303207102
The Door Strike is an OEM part for Frigidaire dryers. It is a small, essential component that ensures the dryer door remains securely closed during operation. The door strike engages with the door catch to keep the door latched, allowing the dryer to operate efficiently and safely. Without a functioning door strike, the dryer may not start, or it could stop mid-cycle.
You should replace this door strike if it becomes damaged or worn out. Over time, the door strike can suffer from wear due to regular use, misalignment, or accidental impact, leading to issues with the dryer door latching properly.
Symptoms of a bad door strike include:
- The dryer door not staying closed
- The dryer not starting or stopping unexpectedly
- Difficulty in latching the dryer door
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Frigidaire dryer door would not stay closed Carolina L. • Miami , FL • September 08, 2015
My dryer door would not stay shut because the door strike was stuck in the door catch. I was afraid that when I pulled the strike out, it would damage the catch, so I ordered the door strike and door catch.
I got the damaged door strike out with needle nosed pliers in about 15 seconds. The door catch was in perfect condition so I didn't need to use the one I ordered. So then I proceeded to install the new door strike. That took me about 15 minutes because I did not have the manual strength to...
Read more
More
$28.95
- Compare At:
-
$34.45
- You Save:
-
$5.50