Samsung Washer WF393BTPARAA1 Parts
Genuine Samsung part
By: Samsung
Part Number: 6601-000148
Ball bearing enables smooth drum rotation in your washer. Replace if spin cycle becomes loud or grinding. Verify fit using your model number below.
Do-It-Yourself Stories from Customers like You
Bad bearings on Samsung front loader. Charles W. • Decatur , IL • September 17, 2019
Followed the excellent videos provided by AppliancePartsPros. Made a multi step repair, if not simple, then extremely less complicated. Loved the way they showed the step by step disassembly as well as the step by step reassembly. Great videos. Got the right parts the first time and very fast delivery. Can’t say enough good things about AppliancePartsPros.com
Read more
More
$56.64
- Compare At:
-
$62.30
- You Save:
-
$5.66
Genuine Samsung part
By: Samsung
Part Number: DC90-10128N
Fix tE error codes with a new water temperature thermistor. This sensor monitors wash water temp. DIY-friendly repair takes under 10 minutes.
Do-It-Yourself Stories from Customers like You
Te code error Michael H. • Blue Springs , MO • August 08, 2014
I first check the schematics to find the heat sensor. On my model it's c on the control panel. I checked the continuity on the orange and white wires. It showed some continuity but not much. I then went to the heater element and found the orange and white wires going to the thermistor. Turns out the heater element and thermistor need repalced.
Read more
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Samsung part
By: Samsung
Part Number: DC97-16991A
Fix washer leaks from worn filter gaskets or drainage issues. This pump filter assembly traps lint and debris. Simple DIY replacement in under 30 minutes.
Do-It-Yourself Stories from Customers like You
The filter was too hard to remove we were hoping the replacement was made differently it is Judy W. • Loogootee , IN • March 07, 2018
Took out the original and put in the replacement.
Read more
More
$44.76
- Compare At:
-
$52.82
- You Save:
-
$8.06
Genuine Samsung part
By: Samsung
Part Number: DC63-00960A
The Washer Door Lock Bezel Cover-Switch Assembly is an essential component for maintaining the functionality and security of your Samsung washer. This genuine OEM part ensures a perfect fit and reliable performance, matching the original design of your appliance. The assembly combines both the bezel cover and the switch, providing a seamless replacement that restores the door locking mechanism to its optimal state. By choosing this Washer Door Lock Bezel Cover-Switch Assembly, you benefit from enhanced durability and precise operation, preventing issues such as door leaks or malfunctioning locks. Installation is straightforward, allowing you to easily replace a damaged or worn-out part without the need for professional assistance. Compatible with a wide range of Samsung washer models, this genuine OEM part guarantees compatibility and longevity. Investing in this high-quality assembly helps maintain your washerGÇÖs efficiency and extends its lifespan, ensuring that your appliance continues to deliver excellent washing performance. Trust in this reliable component to keep your washer running smoothly and securely.
Do-It-Yourself Stories from Customers like You
Washer door wouldn't close, Cierra G. • Fort Worth , TX • October 06, 2017
Ordered part by looking at parts diagram and followed You tube instructions. Easy and quick!
Read more
More
$5.46
- Compare At:
-
$6.50
- You Save:
-
$1.04
Genuine Samsung part
By: Samsung
Part Number: DC62-00182A
Fix water leaks behind the detergent drawer with this washer upper nozzle connector. Located under the top panel. Easy 5-minute DIY repair with basic tools.
Do-It-Yourself Stories from Customers like You
The problem began with the "temperature sensor problem" error Khac T. • Westford , MA • February 12, 2015
When I opened the rear cover and check the temperature sensor, I noticed the wire connection was damp. I dried it up with a hair dryer and it worked again for a few days. Then the problem came back.
When I gone back to inspect the second time, i noticed a lot of water on the floor. I knew there was a leak. I followed the disassemble samsung washer video from "Repair clinic.com" to open the top cover, then i realized the assembly hose was busted.
I ordered the parts from this site and...
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Samsung part
By: Samsung
Part Number: DC62-00299A
Fix ND error codes and drainage issues with this washer check valve. Prevents backward water flow in drain pump. DIY-friendly repair with video guide.
Do-It-Yourself Stories from Customers like You
Hose and check valve Kayed M. • Orland Park , IL • February 17, 2020
Washer said error no drain. Cleaned the filter and still no drain. So the next step was to check
the hose for any debris and when I went to pull the hose off it broke, at the same time I found the check valve flap broke in the drain pump and it was blocking the hose. So I replaced the check valve on the drain pump and replaced the hose.
Read more
More
$7.54
- Compare At:
-
$9.05
- You Save:
-
$1.51
Genuine Samsung part
By: Samsung
Part Number: DC34-00024B
Washer won't start or door won't open? A faulty door lock assembly is the likely cause. This repair takes about 15 minutes with basic tools.
This part fixes the following symptoms
-
Will not agitate
-
won't spin
See more...
Do-It-Yourself Stories from Customers like You
Front door latch mechanism went bad Charlest D. • Richmond , VA • March 17, 2014
Ordered part took seal off to gain access..couple of screws and connectors..bk in business
Read more
More
$152.95
- Compare At:
-
$180.48
- You Save:
-
$27.53
Genuine Samsung part
By: Samsung
Part Number: DC97-14489R
Secures the washer drum during transport or moving. Prevents damage by immobilizing the tub. Replace missing or lost bolts before relocating your washer.
Do-It-Yourself Stories from Customers like You
Moving a front loading washing machine Robert I. • Spartanburg , SC • March 24, 2015
We are moving soon. In checking, I found that a front loading washing machine tub must be stabilized using shipping bolts. I found the correct items on line at AppliancePartsPros.com. "Chris" of your staff was very helpful. He informed me that my washer required only 3 shipping bolt assemblies, instead of the four I expected to buy. The bolts were delivered two days after my order.
Read more
More
$21.38
- Compare At:
-
$25.44
- You Save:
-
$4.06
Genuine Samsung part
By: Samsung
Part Number: DC97-12534D
Drains water from your washer to the standpipe. Replace if cracked, leaking, or clogged. Approximately 95 inches long. Confirm fit with your model.
More
$68.60
- Compare At:
-
$80.95
- You Save:
-
$12.35
Genuine Samsung part
By: Samsung
Part Number: DC31-00112A
The washer motor rotor assembly is the outer rotating component of a direct-drive washer motor that works with the stator to generate the electromagnetic force that spins the wash basket. It is a core part of the motor system that drives both the wash and spin cycles. Replace this part if your washer won't spin or agitate, makes a loud grinding or humming noise during a cycle, or if the machine shakes excessively during operation.
This part fixes the following symptoms
-
Will not agitate
-
won't spin
See more...
Do-It-Yourself Stories from Customers like You
3C error code George W. • Glen Burnie , MD • October 18, 2019
Actually, I am returning your parts. THERE IS NOTHING WRONG WITH THEM! My wife actually found out that we had a warranty on our washer that we didn't know about. But, I can comment that I did chat with your customer service and you guys were very helpful.
Read more
More
$197.95
- Compare At:
-
$233.58
- You Save:
-
$35.63
Genuine Whirlpool part
By: Whirlpool
Part Number: WP89503
Size: 5 foot long. Rubber fill hose used on most automatic washing machines. Two hoses used per machine.
Do-It-Yourself Stories from Customers like You
Low water flow and fabric softener would dispense immediately when cycle started Bob G. • Sylacauga , AL • January 19, 2019
Replaced flow meter and control valve
Read more
More
$19.31
- Compare At:
-
$22.98
- You Save:
-
$3.67
Genuine Samsung part
By: Samsung
Part Number: DC62-00167A
Fix leaking during rinse or spin cycles with this washer check valve ball. Prevents water siphoning and maintains proper water levels. Easy DIY repair.
Do-It-Yourself Stories from Customers like You
Leaking during rinse/spin stage Alessandro F. • San Jose , CA • March 07, 2015
Replacing the upper nozzle connector did the trick.
I could not see damage in the older upper nozzle, it is possible that I could have fixed this just by tightening the parts - but i am happy I purchased both the upper nozzle and check valve ball, it feels good to have installed brand new parts in the washer.
Read more
More
$6.56
- Compare At:
-
$7.87
- You Save:
-
$1.31
Genuine Samsung part
By: Samsung
Part Number: DC61-02427D
The Washer Liquid Soap Dispenser Tray is an essential component for maintaining the efficiency of your Samsung washer. This genuine OEM part is specifically designed to hold and dispense liquid detergent accurately, ensuring that each laundry cycle receives the right amount of soap for optimal cleaning performance. Crafted with durability in mind, the dispenser tray withstands regular use and resists cracking or leaking, providing a long-lasting solution for your appliance. Installing the Washer Liquid Soap Dispenser Tray is straightforward, making it an ideal choice for DIY repairs. Its precise fit guarantees seamless integration with your Samsung washer, restoring the functionality of the liquid soap dispensing system without any complications. By replacing a damaged or malfunctioning tray with this genuine OEM part, you enhance the overall performance of your washer and extend its lifespan. Compatible with a variety of Samsung washer models, this liquid soap tray offers reliable and consistent detergent delivery, helping you achieve cleaner, fresher laundry with every wash. Choose the Washer Liquid Soap Dispenser Tray for a dependable and efficient solution to keep your washer operating smoothly.
Do-It-Yourself Stories from Customers like You
Detergent cup full of water at end of cycle Daniel M. • Tinley Park , IL • May 06, 2016
Replaced with new Detergent cup and fill cap. Cup symphony perfectly. Simple fix for frustrating problem.
Read more
More
$28.78
- Compare At:
-
$33.96
- You Save:
-
$5.18
Genuine Samsung part
By: Samsung
Part Number: DC96-01703B
Fix a washer stuck mid-cycle or showing overfill errors with a new water level pressure switch. This part detects water levels to control fill cycles.
This part fixes the following symptoms
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Samsung washer was getting stuck on 7 minutes and making lots of noise while spinning. Chris C. • Rocky Point , NY • September 01, 2017
Machine was a front load washer, after doing some research found that problem is usually caused by pressure sensor or the spider arm which attaches motor to tub.
Read more
More
$82.95
- Compare At:
-
$98.71
- You Save:
-
$15.76
Genuine Samsung part
By: Samsung
Part Number: 6002-000213
The Refrigerator Screw-Tapping is an essential component for maintaining your Samsung refrigerator's functionality. This genuine OEM part ensures precise threading, allowing screws to be securely fastened without damaging the surrounding materials. Designed specifically for Samsung refrigerators, it guarantees a perfect fit and reliable performance. Whether you are replacing a damaged screw-tapping or performing a repair, this Refrigerator Screw-Tapping simplifies the process, saving you time and effort. Its high-quality construction provides durability and long-lasting support for your appliance. By choosing the Refrigerator Screw-Tapping , you ensure your refrigerator remains sturdy and functional, enhancing its overall lifespan. This genuine OEM part is easy to install and seamlessly integrates with your existing setup, making it an ideal choice for DIY repairs. Trust in the quality and compatibility of this Samsung part to keep your refrigerator operating smoothly and efficiently.
Do-It-Yourself Stories from Customers like You
Dryer would not start. John K. • Lawrenceville , GA • November 03, 2017
The start button had been tricky to use. You had to push it in just a certain way to get the dryer to start. Eventually it was non-responsive. All other controls worked and there was no error code displayed. The repair was to replace the whole control board which cost around $100. Heavy sigh..
Be sure to keep track of all your screws.
BTW it was not the thermal fuse. All the online videos say this is the first thing to look for when the dryer will not start. Be sure to check with the person...
Read more
More
$6.41
- Compare At:
-
$7.56
- You Save:
-
$1.15
Genuine Samsung part
By: Samsung
Part Number: 6009-001522
Replacement hex screw for dryers. Fastens internal components securely in place. Order when original screws are stripped, missing, or lost during repair.
More
$14.14
- Compare At:
-
$15.55
- You Save:
-
$1.41