Poulan Control Cable

This part is a replacement throttle cable assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or malfunctioning throttle cable assembly in a variety of line trimmer models. This throttle cable assembly is a critical component that controls the speed of the engine. If this part is broken, stretched, snapped, or otherwise defective, the line trimmer may not be sufficiently controllable by the user. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this throttle cable assembly, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this throttle cable assembly is suitable for use on several different models of line trimmers manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This cable wire harness assembly is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Husqvarna. A cable wire harness assembly is designed for use with edgers, trimmers, or string trimmers. It is compatible with products from brands such as Husqvarna and Poulan.The cable wire harness assembly is a complete part assembly, and it includes both the throttle cable and the control wires. This item is used to run the motor as well as to adjust the engines out by linking the control handles. The replacement or repair process of the cable wire harness assembly is straight-foward, but the user replacing the part should always wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This throttle assembly cable is manufactured by Craftsman, but also used by Poulan, to regulate the flow of fuel to certain small gasoline-powered engines. This assembly houses the throttle trigger that is used by almost a dozen different machines, including not only trimmers, but also pole saws and other small gasoline-powered tools. Apart from the cutting edges of the pole saws and trimmers, the parts of these devices that sees the most wear and tear, and is most likely to fail, are the throttle assemblies. Whether banged about because of proximity to the throttle trigger or simply because it's the only part protruding from the mid-body of the typical weed cutter, the throttle assembly housing and cable are susceptible to failure. Most often, failure of the cable is the result of one of the buds, attached at the ends to clasp securely, having broken off. In this case, the gasoline engine may start, but will not rev or only does so sporadically. Replacing the cable is a matter of removing the throttle housing and trigger as well as detaching the cable from the carburetor. When replacing the cable, be sure to use one like this, which is a genuine OEM replacement part, manufactured to replicate the specs of the original.

This high-quality drive control cable is used on wheeled trimmers and lawnmowers. The control cable is the part that causes the blade to stop when the control handle is released. It connects the drive control lever to the transmission so the equipment will move or stop when going across the lawn. If the cable is broken or becomes damaged, the brake will not release even if the lever is pressed. If the lawn equipment no longer stops or doesn't move when it should, the drive control cable likely needs to be replaced. Remove the spark plug wire from the spark plug and then release the cables from the handle. Take off the drive cover and remove the drive control cable. Once it has been removed, the new replacement part can be installed before reassembling the other components.This drive control cable is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part and includes a rubber insulated cable. This component is made for use with lawnmowers and string trimmers created by Poulan, Craftsman, Weed Eater, and Husqvarna.

This engine zone control cable is a genuine Husqvarna part, sold individually. This engine zone control cable can be used as a replacement part in a lawnmower. The purpose of the engine zone control cable in a lawnmower is to allow the operator of the appliance to engage and disengage the component with the purpose of speeding up and slowing down the appliance as it is propelled across a variety of surfaces while in use.The engine zone control cable in a lawnmower is a necessary and vital component of the appliance that must be completely replaced if it suffers any form of damage that precludes its basic function. If the engine zone control cable is frayed, worn out, torn, ripped, dented, punctured, warped, or eroded to the point of reduced or no functionality, the engine zone control cable should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This engine zone control cable is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.

This throttle control cable is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Husqvarna. This control cable is designed for use with lawnmowers. It is compatible with products from brands such as Craftsman, Husqvarna, Weed Eater, Poulan, and Ariens.The throttle control cable is used as a connector between the control bail and the carburetor. Over time, with regular wear and tear and exposure to the elements, throttle cables can break at the ends or become frayed and may need to be replaced. The replacement or repair process of the control cable is straight-foward, but the user replacing the part should always wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This is a throttle cable that fits many types of lawn and garden equipment, like pole pruners. This component is the part that links the carburetor to the throttle trigger to ensure the machine runs smoothly. Throttle cables have small connectors on both ends that can occasionally become brittle and break after extensive use. The cable can also sometimes become damaged or kinked during use and require replacement.If the throttle cable is damaged or broken, replacing it involves removing the throttle cable and then separating the two sides of the throttle housing. The throttle trigger can then be removed followed by the rear cover. At this point, the throttle cable itself can be removed. The new throttle cable will be passed through the engine housing and the large hole in the carburetor mounting plate. The cable housing can be pressed into the plastic tube before reassembling all the other parts of the tool.Made for a variety of pole pruners and string trimmers, this throttle cable works with tools by Poulan Pro, Craftsman, Poulan, and Weed Eater. This is a genuine OEM component that is directly sourced from the manufacturer. It comes as an individual part.