Pulley

This is an authentic idler pulley replacement for use with riding lawn mowers and tractors. It is the same version used on the machine when it was new. The idler pulley is used to provide tension to the belt. This ensures that the belt has the correct tension needed to drive the mower forward. The part is durable, but it may still need to be replaced at some point. It could become corroded over time, it could bend, or it could even break in some cases. If the part becomes damaged, it could mean that the belt no longer has proper tension. This can make it difficult or even impossible to use the machine. It should be replaced as soon as possible. This is an OEM part that comes straight from the manufacturer. It is sold individually and does not come with the hardware needed for replacement. The idler pulley is compatible with more than 150 models of riding tractors and mowers. Compatible brands include Husqvarna, Poulan, and Craftsman.

This replacement part is a pulley intended for use in lawn equipment. This is a genuine replacement part made by Husqvarna. A new pulley might be needed if the current one is worn down or broken in any way. It is possible that the pulley can be stripped down overtime and not function as efficiently as when brand new. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by Husqvarna.

This genuine Husqvarna idler pulley can be used as a replacement part for lawn mowers. The function of an idler pulley for a lawn mower is to steer the drive belt and maintain its overall position through tension as the lawn mower is in operation. An idler pulley can be subject to damage from long-term usage, exposure to the elements, or direct impact collisions that can warp the component beyond its ability to continue to function. Symptoms of damage can include frequent belt slippage, engine stalling, and engine overheating. If these symptoms can be directly attributed to a broken or malfunctioning idler pulley, the part should be immediately removed and replaced with this genuine OEM replacement part before using the lawn mower again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This idler pulley is compatible with Husqvarna brand lawn mowers.

This is a genuine replacement engine pulley. The engine pulley is responsible for working with the idler pulley and drive belts in the engine to guide the belts and provide the appropriate amount of tension. The belts are routed around the engine in a specific manner using the system of pulleys, with the engine pulley being one of many. If this pulley becomes defective or stops working, a replacement will be necessary before the unit will operate properly. This OEM engine pulley is manufactured to exact standards by Husqvarna. It is designed to be used in select models from this brand, as well as those from Craftsman, Jonsered, Poulan, AYP, and Weed Eater. The pulley is sold as an individual replacement part. Related parts or hardware components sold separately. This small engine pulley is made of metal. Several tools will be required for this job, including a wrench set, socket set, and screwdrivers. Gloves should be worn to protect the hands and engine repairs should never be done on a hot engine.

This is an idler pulley. It is a genuine Husqvarna part. It is a replacement part for lawn tractors and riding mowers. The idler pulley allows the engine to start by applying tension to the blade belt. It is not uncommon for the pulley to become damaged through normal wear and tear, and it can also be damaged in an accident. If this happens, the machine may not start properly or at all. Check the user manual for instructions for replacing it. Some disassembly of the mower deck may be required. Be sure to allow the engine to cool completely, empty the fuel tank, and disconnect the spark plug before attempting any repair.This pulley is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. It is made to be compatible with mowers and tractors manufactured by Husqvarna, Craftsman, and Poulan.

This replacement part is a pulley. It is a genuine replacement part made by Husqvarna. This specific pulley is found in different appliances that require moving parts during use. Pulleys typically help in the movement between two parts so that the entire appliance is able to work effectively. A new pulley might be needed if the current one is not working properly or is damaged in any way. If the part is not working as well as normal, it could lead to excessive friction between components and eventually overheating or greater damage. If the user notices unusual noises coming from inside the machine it might be due to a malfunctioning idler pulley. Be sure to refer to the correct user manual prior to replacing this part. This part is sold individually. This pulley is sourced directly from the manufacturer. It is also a genuine OEM replacement part.

This flat idler pulley is designed for use with outdoor lawn and garden power equipment, specifically for many different models of lawn tractors and riding mowers. It is compatible with products from brands such as Craftsman, Husqvarna, Poulan, Murray, Ariens, and Troy-Bilt. The flat idler pulley part is crucial for the proper functioning of the lawn mower because it connects to the idler bracket. The purpose of the flat idler pulley is to apply tension to the v-belt. The replacement or repair process of the flat idler pulley will require a moderate amount of savvy. A wrench would be very helpful for the installation process.This flat idler composite pulley is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Husqvarna. This flat idler pulley is made out of metal.

This replacement part is a pulley. This is a genuine replacement part made by Husqvarna. Pulleys are very common in different types of machinery. This part allows for other pieces to be connected and work together so that the machine can operate effectively. A new pulley might be needed if the user notices unusual noises coming from inside the machine. This can be due to a malfunctioning pulley system or damage inside the appliance. Due to the friction that this pulley experiences, it is not unusual for this part to need replacing after years of normal use. Be sure the engine is completely powered down before attempting to replacing this part. Work gloves are also recommended when working near the engine. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part which ensures proper fit.

This is a genuine OEM replacement that is designed for use with riding lawn mowers. This idler pulley helps drive the engine of the Lawn Mower. This part experiences a lot of constant motion, which can cause it to wear over time. It can also become damaged due to an impact or in the course of other repairs, which would require a replacement. This genuine OEM part features a 3/8-inch mounting hole and 3.5-inch exterior diameter, and includes a one-year warranty and can provide a replacement for compatible engines. This OEM idler pulley is manufactured by Husqvarna and designed to be compatible with select machines from the brand, as well as brands like Poulan, Weed Eater, and Jonsered. It is made of durable plastic with a metal bushing and fitting and will provide an exact replacement fit for hundreds of compatible engines. This part is sold individually and does not include any necessary hardware. Ensure that the engine is cool and gloves are worn for hand protection when replacing this part.

The mandrel pulley or spindle pulley is a metal part that spins the blades of a riding mower as it is turned with a belt. Though quite durable, on occasion, something happens to dent or warp the pulley housing, interfering with the turning of the blades and creating a dangerous situation. Once you have found a stationary place for the mower and made certain it cannot be started, drop the mower housing by removing the locking pins and arms. Next, you’ll want to disconnect the spring from the clutch rod. This will allow you to roll the mowing belt off the engine pulley. Remove the deck from beneath the tractor. Using a lubricant, remove the flange nut from the pulley assembly. Next, take the top flange nut off the pulley with a socket wrench. Penetrating oil may be required. Take the pulley from the spindle. Reassembling the unit is a matter of walking back through the disassembly process. This spindle pulley is an OEM replacement manufactured by Husqvarna. In addition, it is compatible with many Craftsmen mowers as well. This OEM part is individually packaged and sold.