Range / Cooktop / Oven Control Board

The Noise Filter is an OEM part for Whirlpool built-in wall ovens. It is installed inside the oven cavity near components that produce vibrations, such as the convection fan motor. 

Causes of a faulty noise filter include the degradation of noise-dampening materials over many heating and cooling cycles. Physical damage from accidental impact during cleaning could also compromise its sound-blocking ability.

Symptoms of a bad noise filter include: 

• Excessive buzzing or humming noises emitted from the oven cavity
• Louder than normal fan or component sounds carrying into the kitchen
• Vibrations felt externally on the oven chassis during operation

This OEM replacement fits several Whirlpool, KitchenAid, and Jenn-Air wall oven models.

Fix unresponsive buttons, error codes, or power surge damage with this range oven control board. Restores all cooking functions and timer operations.

Fix oven that won't heat to correct temperature or won't turn on. This control board regulates heating cycles. Moderate DIY install, 1-2 hours.

Oven won't heat, display blank, or controls unresponsive? This electronic control board processes temperature settings and manages heating elements.

Fix an oven that shuts off randomly, won't start, or shows error codes. This electronic control board manages heating cycles and user inputs.

Oven won't heat or display is blank? This electronic control board manages temperature, timers, and element power. Moderate DIY repair in 1-2 hours.

Fix display issues, unresponsive controls, or oven overheating with this electronic control board. Manages bake/broil functions and timing display.

Fix an oven that won't heat, shows error codes, or has an unresponsive display. This control board regulates heating elements and oven functions.

LED display module that replaces the control-panel display to restore visible readouts and indicator lights so you can monitor appliance status, settings and error information at a glance. What it does:

• Replaces a failed or damaged control-panel LED display to restore readable numeric and icon readouts.
• Helps fix symptoms such as a blank, dim, flickering, or partially missing display.
• Makes error codes and status indicators visible again for easier troubleshooting.
• Designed to interface with the appliance's existing control board and connectors.

• Disconnect power to the appliance before starting any repair to prevent electrical shock.
• Remove the control panel or trim per the service manual and handle the display by its edges to avoid damage.
• Carefully disconnect and reconnect the ribbon/plug-style connector; confirm correct orientation before powering up.

This electronic oven control board governs your range's heating functions and displays the time and timer. Replacing a failed board restores reliable bake/broil operation, accurate temperature control, and a responsive clock/timer interface. What it does:

• Controls bake/broil circuits to run selected cooking modes
• Monitors the oven temperature sensor and regulates heat to the set temperature
• Drives the time-of-day and countdown timer display
• Interprets keypad inputs for mode selection and settings
• Failure symptoms can include no heat or erratic heat, a blank or flickering display, or unresponsive buttons

• One electronic control board assembly

• Disconnect power at the breaker before servicing; verify no voltage is present
• Use anti-static precautions and handle the board by its edges
• Photograph wiring and transfer connectors one at a time to the same positions
• Reuse the existing mounting hardware and any faceplate/overlay as required; set the clock after restoring power

Fix F10 or F11 error codes with this range electronic oven control board. Restores accurate temperature control and timer functions. Moderate DIY repair.

Fixes oven that won't heat, turns on by itself, or has unresponsive buttons. Moderately difficult repair requiring power disconnect and panel removal.

Restore reliable timekeeping and timed-cycle control with this Clock/Timer Kit. It replaces a failed clock/timer so you can set the time, run countdowns, and receive alerts as designed by the manufacturer. What it does

• Displays and keeps the appliance's current time
• Controls kitchen timer/countdown functions and audible alerts
• Interfaces with the appliance to manage timed cycles (start/stop)
• Helps resolve issues like blank or dim display, timer not advancing, drifting time, or unresponsive keys/knob

• 1 clock/timer kit assembly

• Disconnect power at the breaker before servicing; verify no voltage is present
• Access the control area; note screw locations and panel orientation
• Label or photograph wire locations; transfer connections one at a time to the new unit
• Mount securely, reassemble, restore power, and set the clock before testing timer functions

If your oven control flickers or resets randomly, the transient suppressor may have failed. This part protects the control board from power surges.

Electronic oven control board that manages the oven's functions and user interface, restoring temperature regulation and bake/broil cycles when the original control fails, helping return normal oven operation. What it does:

• Manages bake, broil and self-clean cycles and communicates with temperature sensors and relays.
• Replaces a failed control that can cause a blank or erratic display, incorrect temperatures, or an oven that won't heat.
• Helps resolve intermittent heating, unexpected shutoffs, and control-panel errors when the board is the root cause.
• Interfaces with the existing wiring harness and oven components to restore electronic control functions.

• Always disconnect power at the breaker before accessing or replacing the control board.
• Handle the board by the edges and avoid static discharge; ground yourself before touching electronics.
• Installation requires basic access to the oven's control cavity and may involve panel removal and reconnecting wiring harnesses.

Range won't power on, clock or controls aren't working? The electronic control board manages all oven functions. DIYers report plug-and-play install.