Range / Cooktop / Oven Filter

The Filter is an OEM part for Whirlpool ranges. Installed at the base of the downdraft vent opening, this filter works to capture grease, smoke and odor particles emitted during cooking.

Causes of a bad filter can include natural saturation over many uses as it accumulates grease residue. Extremely high-heat or splattering cooking methods may also accelerate the clogging process.

Symptoms of an inefficient range downdraft filter include:

• Grease residue visible below the vent opening or on surrounding cabinetry
• Reduced effectiveness at extracting smoke, odors or steam from cooking surfaces
• Vent motor or fan starting to strain or make louder noises during use

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: metallic. Measures about 5 inches wide by 7-1/2 inches deep.

This replacement grease filter captures airborne grease and cooking residue in your appliance's venting system, helping protect the blower and ductwork while maintaining effective ventilation and airflow.

• Traps grease and food particles carried by the exhaust airstream
• Helps sustain proper airflow and reduce smoke and lingering odors
• Replace if mesh is torn, warped, missing, or remains clogged after cleaning
• Common symptoms include persistent smoke/odors, visible grease buildup, or a loose/rattling filter

• Disconnect power before servicing and allow the appliance to cool completely
• Open the filter access, release the retaining latch or screws, and remove the old filter
• Slide the new filter into place, matching the original orientation/tabs
• Ensure the filter is fully seated and secured; do not operate the unit without a filter

Color: metallic. It measures about 10 inches in diameter.

Microwave venthood grease filter. Color: silver. Measures about 5 inches wide by 7-1/2 inches deep.

This grease filter traps airborne grease and cooking residue from the vent airstream. Replacing a worn or clogged filter helps restore airflow, protects the blower and ducting, and reduces greasy buildup on surrounding surfaces.

• Captures grease particles before they reach the fan and ductwork
• Helps maintain proper ventilation performance
• Common symptoms of a bad filter: lingering odors, poor venting, visible saturation or damage, rattling or loose fit
• Regular replacement supports cleaner operation and effective exhaust

• Disconnect power to the hood or microwave before servicing
• Access the filter from the underside; release the latch or fastener and remove the old filter
• Install the new filter in the same orientation as the original; ensure it is fully seated and secured
• Do not operate the vent without a grease filter in place

Color: metallic. Measures about 15 inches wide by 8 inches deep.

Color: metallic. Measures about 13-1/2 inches wide by 5 inches high.

The Grease Filter is an OEM part for Bosch ranges and cooktops. It is responsible for capturing and containing grease, oils, and other vapors produced from cooking to help keep indoor air fresh and prevent buildup. Regular cleaning is important to maintain optimal performance.

Causes of a bad grease filter can include excess buildup that blocks airflow from frequent high-heat cooking. Exposure to flames or excessive heat may cause damage over time as well.

Symptoms of a bad grease filter include:

• Reduced suction power and airflow from the range hood
• Grease accumulation on surrounding surfaces below the hood
• Unpleasant cooking odors escaping into the kitchen rather than being vented outside

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This charcoal filter fits an over-the-range microwave hood and absorbs cooking odors when the unit is set to recirculate indoors. Replacing a saturated filter restores effective odor control and helps keep vent airflow unobstructed.

• Absorbs smoke and odors in non-vented/recirculating installations
• Helps maintain proper vent airflow and fan performance
• Common signs it's due: lingering odors, weak vent suction, dark/discolored filter media, or a damaged/crumbly filter
• Restores intended odor-reduction performance after the original filter is saturated

• Disconnect power to the microwave before servicing
• Remove the upper grille/access panel to access the charcoal filter compartment
• Slide out the old filter; install the new one in the same orientation and seat fully
• Reinstall the grille, restore power, and test the vent fan

This charcoal filter is used in recirculating range hoods to reduce cooking odors and smoke. Replacing a saturated filter restores ventilation performance and helps keep kitchen air fresher when venting air back into the room. What it does:

• Adsorbs cooking odors and vapors when the hood is set to recirculate indoors
• Helps maintain proper airflow and capture smoke/steam during cooking
• Replace if saturated, damaged, or shedding carbon
• Common signs: lingering odors, reduced airflow, discoloration, or loose carbon granules

• 1 charcoal filter

• Disconnect power to the hood before servicing
• Remove/open the filter cover or grille; release the old filter from its clips or frame
• Insert the new filter with proper orientation; secure it and reinstall the cover
• Charcoal filters are not washable or reusable; replace periodically as needed

This replacement filter restores clear airflow through your appliance's venting system. It captures airborne particles so the fan can exhaust efficiently and helps protect internal components from buildup.

• Traps grease and other particulates in the air stream
• A clogged or damaged filter can reduce airflow and strain the blower
• Replace when torn, warped, or heavily saturated
• Common symptoms: weak venting performance, lingering steam/odors, visible residue on or around the filter

• Disconnect power to the appliance before servicing
• Access the filter from the intake grille or bottom panel and release the retaining tabs/screws
• Install the new filter in the same orientation; ensure it seats fully and locks in place
• Restore power and test fan operation on each speed

This is a genuine OEM replacement grease filter for use on cooktops. The air filter is used during cooking to filter smoke, grease, and other air contaminants from the air. When food is overheated, and smoke fills the kitchen, the air filter will pull the smoke from the air through the filter and out the exhaust. This helps to keep the air in the house odor and smoke-free. Odors can alter the way food tastes, so keeping the air and grease filter changed can help when serving food and how it is received. This filter also catches grease particles when cooking food in oil. These spatters will eventually clog the filter and necessitate the need to remove and replace it. If the filter is not removed, the air will not be able to circulate through it, and the filter will not work efficiently. Removal does not require tools. The filter is simply pulled out of the cavity and a new one placed in the cavity. The old filter should be discarded; this is not a filter that can be washed and reused. This filter is a black metal part that is sold individually. It is designed for stovetops and ranges manufactured by General Electric.

Color: metallic. Measures about 11 inches wide by 2-1/2 inches high.

This factory replacement filter helps protect your appliance by trapping unwanted debris and contaminants so the system can perform as designed. Replace a damaged or clogged filter to restore proper flow and dependable operation. What it does

• Screens particles to protect internal components and maintain airflow or water flow
• Helps sustain performance and reduce wear on the appliance
• Common signs it's time to replace: reduced flow/venting, lingering odors, or visible damage
• Preventive replacement can help maintain efficiency over time

• 1 filter

• Disconnect power to the appliance; shut off water supply if applicable
• Access and remove the old filter, noting orientation and seals
• Install the new filter fully seated; do not overtighten any fasteners or fittings
• Restore power (and water, if used) and check for proper operation and leaks/airflow

Replace a clogged or damaged vent grease filter to keep your appliance drawing properly. This filter captures airborne grease and cooking particles to protect the blower and help maintain effective ventilation over your cooktop.

• Traps grease and particulates pulled through the ventilation stream during cooking
• Helps protect the blower and internal components from buildup
• Supports proper airflow and smoke/odor capture from the cooktop area
• Replace if torn, warped, heavily saturated, or when cleaning no longer restores performance

• Disconnect power to the appliance before servicing
• Open the vent grille or filter access and release the retaining tabs/handle
• Note orientation; seat the new filter fully and latch securely
• Do not operate the vent without a grease filter installed

Color: metallic. Measures about 10 inches wide by 5 inches deep. Be sure to measure old filter before ordering. If your filter measures approx 11 1/4" x 6 1/8" use R0710163.