Range / Cooktop / Oven Gas Conv Kit Parts

This orifice holder secures the 5K gas orifice in place on compatible gas burners, keeping the orifice aligned for consistent flame performance and safe operation. It's a small but essential mounting component. What it does:

• Holds the 5K orifice firmly at the burner connection to maintain correct alignment
• Helps ensure consistent gas flow to the burner for steady, even flames
• A damaged or loose holder can cause a weak, uneven, or intermittent flame
• Works with the burner assembly to support reliable ignition and heat output

• One orifice holder (5K) as shown

• Turn off gas supply and power to the appliance before servicing
• Access may require removing the burner cap and grates or front panels
• Handle small components carefully; keep track of fasteners and orientation

This orifice spud directs gas flow into the burner for consistent ignition and flame control. It restores proper burner performance so cooking heats evenly and burners light reliably. What it does:

• Seats the burner orifice to control gas flow to the burner
• Helps maintain a steady, even flame for consistent cooking
• Can resolve weak or uneven flames and burners that struggle to light
• Works as the sealed interface between the gas manifold and burner tube

• One orifice spud

• Turn off the gas supply and disconnect power before servicing
• Inspect surrounding seals and gaskets for damage and replace if necessary
• Use basic hand tools; avoid overtightening to prevent damage

This orifice spud directs gas flow to a range or oven burner for proper ignition and stable flames. Replacing a worn or damaged spud restores consistent burner performance and helps prevent uneven heating or ignition problems. What it does:

• Seats the burner orifice and channels gas to the burner for correct flame shape and heat output
• Helps maintain steady ignition and consistent burner operation
• Commonly replaced when flames are weak, uneven, or fail to light reliably
• Fits into the burner assembly to ensure safe, controlled gas flow

• Turn off the gas supply and unplug the appliance before servicing
• Remove burner parts to access the orifice; keep track of small parts and orientations
• Thread by hand first, then snug with the correct-size wrench—do not overtighten

This orifice spud directs gas flow to a burner for correct flame performance, restoring safe, consistent ignition and heat. It's a direct-replacement component used where the factory orifice has become damaged or worn. What it does:

• Controls the gas flow to a specific burner for proper flame size and combustion
• Helps restore consistent ignition and even heating when a burner burns low or unevenly
• Can stop symptoms like weak or unstable flames and uneven cooking
• Does not alter appliance settings—matches OEM flow characteristics when installed

• Turn off the gas supply and power to the appliance before starting any work
• Use appropriate tools and thread sealant rated for gas joints if required by the manufacturer
• After installation, check all connections for leaks with a soap solution or approved leak detector
• Gas-system repairs are safety-sensitive; perform the replacement

Natural gas. LG 1.68mm

This orifice spud is the small gas jet used in LP conversion kits to regulate propane flow to a burner, helping restore correct flame size and combustion after converting to liquid propane. It's a direct-fit component for affected burners. What it does:

• Replaces the burner jet that meters propane for safe, consistent flame
• Restores proper flame height and prevents oversized or sooting flames after LP conversion
• Helps burners light reliably and maintain even heat
• Works as part of an approved LP conversion to match appliance fuel type

• Turn off gas supply and power before starting any gas appliance service
• Use the correct orifice size and follow the appliance LP conversion instructions or service manual
• Hand-tighten and then torque per manufacturer spec if provided; avoid overtightening

LP orifice / size #84 (5k)

This conversion kit converts a compatible gas range or oven between fuel types so the appliance operates safely and correctly after a fuel change. It includes the factory-specified components needed for a proper conversion when the kit matches your model. What it does

• Replaces orifices and fittings to match the appliance to the correct gas type so burners and oven heat as designed.
• Restores proper flame size and temperature control after switching fuel types.
• Helps eliminate symptoms like uneven heating, burner flame issues, or difficulty maintaining set temperatures that can occur after an incorrect fuel setup.
• Ensures the appliance meets manufacturer fuel-type requirements when installed correctly.

• The factory conversion components included with this kit.

• Follow the appliance manufacturer's conversion instructions exactly; incorrect installation can be dangerous.
• Shut off the gas supply and disconnect power before starting work.
• Use appropriate seals and torque specifications; do not modify parts.

This orifice is the small, precision gas fitting that meters fuel to a single burner for correct combustion and stable flame. It restores proper burner performance and helps maintain consistent heating. What it does:

• Controls gas flow to a burner so the flame size and heat output are correct
• Helps produce an even, stable flame for reliable cooking or heating
• Can address symptoms like weak or uneven flames, poor ignition, or burners that won't maintain heat
• Works with the burner tube and valve as part of the gas delivery system

• Turn off the gas supply and unplug the appliance before starting work
• Use the correct orifice size and tighten to OEM torque; loose or damaged fittings can leak
• After installation, check all connections for gas leaks with a soap solution or approved leak detector

This orifice controls gas flow to a single gas burner, restoring correct flame size and consistent cooking performance. Use it to replace a clogged, damaged, or incorrectly sized orifice for safe, even burner operation. What it does:

• Regulates the gas flow into the burner to produce the proper flame height and heat output
• Helps correct weak, uneven, or slow-to-light burner flames when the orifice is clogged or damaged
• Ensures stable combustion at the burner for consistent cooking results
• Works as the proper-fit replacement part when the original orifice is worn or obstructed

• One orifice

• Turn off the gas supply and unplug the appliance before beginning any service
• Only install if the orifice size matches appliance requirements; improper orifice sizing can affect performance and safety
• Use appropriate tools and follow the appliance service manual or diagram for access and reassembly

The Holder Orifice is an OEM component specifically designed for Whirlpool ranges. Located inside the gas burner unit, the orifice holds the brass valve that regulates gas flow to each burner flame. Its sturdy construction and precisely sized opening ensure a stable, controlled fuel supply.  

Causes of a bad holder orifice can include mineral deposits building over time which diminish sizing accuracy or cracks developing that cause leaks.

Symptoms of a bad holder orifice include:  

• Burners emitting unstable or sporadic flames of abnormal sizes
• Inability to efficiently ignite or achieve proper burner settings  
• Strong gas or fuel smells coming from the range top
• Discolored or corroded brass components

This OEM Whirlpool part is also compatible with KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore cooking appliances. 

This air shutter controls the air-to-gas mixture for a range/oven burner to help produce a proper flame for efficient cooking and reliable ignition. It's a simple replacement part that restores correct airflow at the burner inlet. What it does:

• Regulates burner airflow to help achieve a stable, properly-colored flame
• Helps correct weak, uneven, or yellow-tipped flames when misaligned or damaged
• Supports consistent ignition and steady burner performance
• Works at the burner/orifice connection to fine-tune combustion air

• Turn off gas supply and electrical power to the appliance before servicing
• Remove burner components as needed to access and replace the shutter; retain screws or clips
• Position the shutter per OEM orientation and secure; do not overtighten fasteners