Refrigerator Auger, Helix, Crusher

This ice maker kit adds automatic ice-making capability to compatible refrigerators. It supplies the core components to produce, harvest, and store ice cubes reliably, restoring convenience when the original icemaker or related parts are missing or failed.

• Automatically fills, freezes, and ejects ice, cycling until the storage bin is full
• Directs and controls water flow via the inlet valve and fill tube for proper ice production
• Stores finished cubes in the bin for easy access
• Helpful for issues like no ice production, intermittent or undersized cubes, or leaks around the icemaker area

• Disconnect power and shut off the water supply before starting; wear cut-resistant gloves
• Mount the icemaker and bin in the freezer; route/seat the fill tube correctly to prevent leaks
• Install the inlet valve, connect tubing and harnesses, and tighten 1/4-in compression fittings; turn on water and check all joints for leaks
• Restore power; allow the freezer to reach temperature and up to 24 hours for full ice production, discarding the first batches

Fix a cracked or broken ice bucket glide that causes your bin to stick or misalign. This right-hand slide rail restores smooth drawer movement in 30 minutes.

Ice maker not ejecting ice or forming icicles? This freezer ice maker assembly produces and dispenses ice cubes. DIY-friendly replacement part.

Ice won't dispense or bin is cracked? This ice container assembly stores ice and feeds the dispenser. Easy slide-in replacement—most installs in minutes.

Missing or cracked ice bin? This replacement ice cube pan restores contained ice storage in your refrigerator's freezer. Simple slide-in installation.

Ice not dispensing or spilling in freezer? A cracked or warped ice bucket causes jams and mess. This bin stores ice and positions it for dispensing.

Ice jams or won't dispense? This complete ice container assembly with integrated auger stores ice and feeds cubes to your dispenser. Easy DIY fix.

Ice not dispensing or leaking from bin? This ice bucket assembly holds ice and houses the auger. Fixes cracked housings affecting cube/crush selection.

This replacement ice bucket housing encloses and supports the freezer's ice storage bin at the dispenser. A damaged housing can cause bin wobble or misalignment—replacing it restores a secure fit, smoother dispensing, and helps reduce stray ice and frost.

• Holds and aligns the ice bin for proper engagement with the dispenser mechanism
• Guides ice toward the chute and helps contain cubes and shavings
• Helps limit warm-air leaks around the bin to reduce frost and clumping
• Typical symptoms: bin won't seat or is wobbly, poor or no ice dispensing, ice spilling inside freezer, visible cracks in the enclosure

• Unplug the refrigerator and shut off water before servicing
• Remove the ice bin; take out any screws or clips securing the housing
• Transfer any reusable brackets or screws from the old housing to the new one
• Reinstall the housing level and secure; seat the bin fully, restore power, and test dispensing

Ice maker not dispensing or spilling ice? This ice guide assembly directs ice cubes properly. Easy 5-10 minute DIY fix with basic tools required.

Ice won't dispense or jams in the chute? A damaged ice bucket with worn gears or cracks prevents smooth delivery. This assembly restores reliable dispensing.

Ice won't dispense or grinds loudly? A bent or worn crusher blade is often the culprit. This blade fits inside the ice bucket assembly. Easy DIY fix.

This ice maker shut-off arm is the wire lever that detects the ice bin level and stops production when raised. Replace a bent, broken, or missing arm to restore reliable on/off control of your icemaker.

• Monitors bin fullness; in the up position it opens the internal switch to pause ice making
• Lowers as ice is used so the icemaker can resume cycles
• Restores manual shutoff when you lift the arm

• Disconnect refrigerator power and turn off the water supply before servicing
• Remove the ice bin for access; open the icemaker front cover if your model has one
• Pull the old arm straight out of the pivot holes; align and fully seat the new arm so it moves freely
• Restore power and lower the arm to resume ice production; the arm raises and stops production when the bin is full

Refrigerator not making ice or ice maker not harvesting? This complete ice maker assembly fixes no ice production. DIY-friendly, 10-30 minute install.

This ice bucket stores the ice your refrigerator's icemaker produces and keeps it organized and ready to use. Replace a cracked or missing bin to restore proper ice storage and help prevent spills, jams, and contamination.

• Collects and stores ice cubes produced by the icemaker
• Positions under the icemaker so cubes drop cleanly into the bin
• Slides in/out for easy access and smooth operation
• Common symptoms: cracked or warped bucket, ice spilling or jamming, difficulty seating the bin, plastic fragments in ice

• Unplug the refrigerator and switch the icemaker off before servicing
• Remove the old bucket and empty any ice; transfer any reusable parts from the original if applicable
• Align and fully seat the new bucket on the guides/tabs
• Restore power and turn the icemaker back on; allow time to make ice

Ice maker clicking or not producing ice? A worn drive gear with stripped teeth is often the cause. This 5-minute fix restores normal ice production.