Refrigerator Door

This dairy door is the flip-up cover for the refrigerator's dairy compartment on the fresh-food door. It keeps butter and cheese covered and contained, restoring a clean, finished look when the original cover is cracked or missing.

• Covers the dairy compartment and hinges open for easy access
• Helps keep small dairy items contained and organized on the door
• Replaces a cracked, warped, discolored, loose, or missing cover
• Closes properly when seated on the original hinge posts

• Disconnect power before servicing
• Remove the old cover by releasing its tabs from the hinge posts
• Align the new cover with the hinge posts and press to snap into place
• Avoid forcing brittle plastic; allow the part to reach room temperature before installation

Color: White

Note: This is a 2 door kit with both the Refrigerator and Freezer doors.

This Door reversal kit provides the hardware needed to change a refrigerator door's swing direction so it opens from the opposite side, restoring user convenience and proper door alignment. What it does:

• Provides the hinge and mounting hardware to convert the door swing from left to right (or vice versa)
• Helps the door close and seal correctly after reversal, reducing cold air loss
• Restores proper door alignment to stop rubbing or catching on surrounding cabinetry
• Useful when relocating or reconfiguring appliance placement

• Follow the refrigerator manufacturer's instructions; remove food and secure shelves before starting
• Support the door during removal and reinstallation to prevent damage or injury
• Use basic hand tools; keep small parts organized to ensure correct reassembly

Get the hinge hardware needed to change your refrigerator or freezer door swing so it opens from the opposite side. This door reversal kit supplies the replacement parts that let you reposition the hinge and mounting points for a clean, functional flip. What it does:

• Replaces the hinge and mounting hardware used when switching the door to the opposite side
• Restores proper door alignment and sealing after reversing the swing
• Helps resolve rubbing, uneven closing, or gaps caused by reversed hinges
• Works as the repair kit when original hinge components are damaged or missing

• Basic mechanical skill and common hand tools are usually required
• Keep power to the appliance off and empty the door before starting to reduce weight and risk
• Follow the appliance manufacturer's instructions for hinge removal and reinstallation

This inner door panel restores the interior structure and appearance of an oven door. It provides a replacement inner surface that supports door glass and insulation for safe, reliable operation. What it does:

• Replaces a cracked, dented, or warped inner oven door panel to restore proper fit and finish
• Helps secure and protect the door glass and internal insulation
• Eliminates rattling or loose interior door components caused by bent or damaged panels
• Improves the door's sealed fit when combined with intact outer glass and seals

• Power off the appliance and allow the oven to cool completely before starting any repair
• Door disassembly and reassembly are often required; keep track of fasteners and use a work surface to protect glass
• Wear gloves and eye protection—panel edges and broken glass can be sharp
• Follow the OEM service manual for correct removal/replacement procedures and torque specifications

This inner door panel replaces the plastic liner on the inside of a refrigerator or freezer door, restoring a clean interior surface and providing mounting points for bins and shelves. It helps stop air leaks and improves door appearance. What it does:

• Replaces a cracked, warped, or damaged door liner to restore structural integrity and appearance.
• Provides mounting surfaces for door bins, shelves, and gaskets so accessories fit and seal properly.
• Helps maintain proper door sealing by restoring the inner surface and alignment.
• Reduces the risk of moisture intrusion behind the liner that can cause odors or mold.

• High-level task: usually removes and installs from inside the door after removing door trim and hardware; follow manufacturer instructions.
• Use correct replacement fasteners and gaskets; do not overtighten screws to avoid cracking the liner.
• Work with the door supported to prevent dropping or bending; two-person assistance may be helpful for larger doors.
• Disconnect power if required by the manufacturer before removing door components to avoid electrical hazards.

This inner door panel is the oven inner metal panel that supports the oven door assembly and helps protect internal components from heat. It restores the door's structure and helps maintain proper oven performance. What it does:

• Replaces a bent, dented, or damaged inner door metal panel to restore door stability
• Helps protect inner components and insulation from heat exposure
• Reduces rattling or misalignment caused by a compromised panel
• Supports proper sealing and function of the oven door when combined with intact outer glass and seals

• Service panel replacement requires removing the oven door; follow manufacturer instructions for safe disassembly
• Handle with care — metal edges and glass components can be sharp or fragile
• Disconnect power to the appliance before beginning any repair
• If door glass or seals are damaged, replace those parts as well for a complete repair

Color: Stainless
Note: This is a 2 door kit with both the Refrigerator and Freezer doors.
 

This door foam assembly replaces the inner insulating foam used inside a refrigerator/freezer door to restore thermal performance and reduce condensation. It helps maintain cold temperatures and improves energy efficiency when the original foam is damaged. What it does:

• Replaces worn, crushed, or missing door insulation to help maintain internal cabinet temperatures
• Reduces cold air loss and helps prevent moisture buildup and frost on the door interior
• Restores proper door fit and support when the original foam has deteriorated
• Can alleviate symptoms such as uneven cooling near the door edge, increased run time, or visible gaps/voids in the door

• One door foam assembly (inner door insulation), as shown

• Follow manufacturer service manual steps; handle foam carefully to avoid tears or compression
• Disconnect power if removal requires working near electrical components or lights
• Use appropriate adhesive/fasteners specified by the manufacturer when refitting the foam

Color: Black

Note: This is a 2 door kit with both the Refrigerator and Freezer doors.