Refrigerator Ice Door Or Ice Chute

This replacement duct cap assembly covers and seals a designated duct opening inside the appliance. It helps direct flow through the intended path and keeps out debris so the system can operate as designed.

• Covers and seals a duct opening to maintain correct internal flow paths
• Helps prevent air/moisture leaks and blocks dust or debris entry
• Replaces a cracked, warped, loose, or missing cap assembly
• Symptoms can include visible damage, a cap that won't stay seated, leak noises, or rattling from the duct area

• Disconnect power; turn off water supply if applicable before servicing
• Access the duct location, remove the damaged cap, and retain any screws/clips
• Clean mating surfaces; transfer any reusable seals or hardware to the new assembly
• Seat and secure the new cap without overtightening; restore power and check for a snug, leak-free fit

Access door provides a finished cover for the appliance's service opening, protecting internal components from dust and damage while keeping the unit looking tidy and allowing access for maintenance and repairs. What it does:

• Covers the service or access opening and protects wiring, valves, and other internal parts.
• Allows access to controls, connections, or components for inspection and repair without removing major panels.
• Helps prevent debris, pets, or fingers from contacting internal parts.
• Replace a missing, cracked, or damaged access door to restore appearance and reduce exposure of internal components.

• Always disconnect power (and gas for gas appliances) before removing panels or working on the appliance.
• Handle the door and surrounding edges carefully to avoid cuts; keep original fasteners and reuse if undamaged.
• Align tabs/clips and secure with manufacturer screws; do not overtighten.

Replacement ice dispenser door that restores proper ice chute coverage and helps prevent ice spillage and air leaks in compatible refrigerators. OEM-style fit keeps the dispenser operating cleanly and helps maintain freezer interior order. What it does:

• Covers the ice chute so cubes are directed into the dispenser, reducing spills and mess.
• Prevents drafts and helps limit frost buildup around the dispenser opening.
• Replaces cracked, warped, or stuck dispenser doors that interfere with ice delivery.
• Restores proper alignment so the dispenser lever and chute operate smoothly.

• Disconnect power to the appliance before accessing the dispenser area to avoid injury.
• Removal typically requires taking off the inner door trim or access panel; retain all fasteners for reinstallation.
• Handle edges carefully to avoid damage; verify proper alignment and dispenser function after installation.

This ice guide directs ice from the freezer ice maker or bin into the dispenser chute to keep cubes flowing and reduce jams. It restores proper alignment so the dispenser delivers ice cleanly to the cup or container. What it does:

• Guides ice from the ice maker/bin into the dispenser chute for smooth delivery
• Helps prevent ice from catching on the chute or falling off-center
• Reduces noisy or irregular dispensing caused by misaligned ice flow
• Works with the ice-maker/dispenser assembly to maintain consistent dispensing

• One ice guide

• Turn off ice/dispenser functions and unplug power before starting work
• Handle gently to avoid cracking the plastic guide; align tabs with mounting points before snapping into place
• No special tools typically required; refer to appliance manual for access steps
• If ice continues to jam after replacement, inspect ice maker, bin, and chute for ice buildup or other damage

This replacement funnel assembly directs dispensed contents safely and cleanly from the appliance outlet into a cup or container, helping restore proper flow and prevent spills. It's a direct-fit component used in the dispenser area. What it does:

• Channels dispensed water/ice/solution from the dispenser outlet to the cup or container
• Prevents drips and misdirected flow that can cause pooling or messes
• Helps reduce ice jams or blockages in the dispenser path
• Restores correct alignment and sealing of the dispenser outlet

• Disconnect power (and water line if applicable) before beginning any work.
• Replace only with the exact part number; align tabs and snaps carefully to avoid damage.
• Typical tools: screwdriver or nut driver may be needed to remove fasteners; avoid overtightening.

This funnel assembly directs detergent and rinse water from the dispenser into the dishwasher tub, helping consistent dispensing and preventing spills. Replace a cracked, clogged, or damaged funnel to restore proper detergent flow. What it does

• Channels detergent/rinse solution from the dispenser to the wash tub for normal cleaning cycles.
• Prevents leaks and spills that can occur from a broken or distorted funnel.
• Helps avoid uneven or missed dispensing that can lead to poor wash performance.
• Fits into the dispenser housing and works with the dispenser release mechanism.

• One funnel assembly.

• Disconnect power to the appliance before inspecting or servicing the dispenser.
• Remove the inner door panel or dispenser cover as needed to access the funnel; keep track of fasteners.
• Inspect and replace any worn seals or clips when installing the new funnel.

This ice door seals the freezer's dispenser chute to keep cold air in and block warm air and moisture out. It helps maintain proper ice dispensing and reduces icing or melting in the dispenser area. What it does:

• Seals the ice dispenser chute to prevent warm air intrusion and reduce ice clumping
• Opens to allow ice to pass when the dispenser is activated and closes to keep the bin insulated
• Helps prevent melted ice or water from entering the freezer cavity
• Reduces noisy or jammed dispensing caused by damaged or misaligned doors

• One ice door

• Disconnect power to the appliance before attempting any repair
• Inspect mounting tabs and hinges for damage; replace if worn to ensure proper sealing
• Handle plastic parts gently to avoid cracking; align door before tightening fasteners

This door ice bin is the removable plastic container that stores ice made by your refrigerator's icemaker. It keeps ice contained in the door for easy access and helps prevent spills inside the fresh-food compartment. What it does

• Holds and stores cubed ice produced by the icemaker so it's ready at the door
• Keeps ice from spilling into the refrigerator cavity when the door is opened
• Replaces cracked, damaged, or missing ice storage bins that cause leaks or loose ice
• Restores proper alignment with the door shelf for smooth removal and replacement

• Empty any loose ice before removing the old bin to avoid spills
• Typically installs by sliding into the door shelf track; lift slightly to remove
• Inspect door shelf guides for damage and align bin carefully when reinstalling
• Wear gloves when handling cold ice and avoid forcing the bin to prevent cracking

This ice guide directs ice from the freezer's ice maker into the ice bin or dispenser chute, helping prevent spills and misalignment. It's a simple replacement that restores proper ice flow for reliable dispensing. What it does:

• Guides ice cubes from the ice maker to the bin or dispenser chute
• Helps reduce ice spilling, jamming, or misdirected cubes
• Keeps the ice path clear to improve consistent dispensing
• Replaces cracked, warped, or missing plastic guide pieces

• Disconnect power to the appliance before beginning any work
• Remove the ice bin and/or access cover as needed to reach the guide
• Install by snapping or securing into the existing mounting slots; avoid forcing to prevent breakage
• Handle carefully—this is a molded plastic part that can crack if over-tightened

This dispenser gate is the replacement door that opens and closes the ice/water chute to control dispensing and help keep the interior of the dispenser sealed from room air. Replaces a worn, broken or warped gate to restore proper sealing and dispensing. What it does:

• Covers and seals the dispenser opening to keep cold air in and warm air out
• Opens and closes to allow ice or water to pass through the dispenser
• Helps prevent drafts, ice buildup, and unwanted debris from entering the dispenser
• Common symptom: dispenser door cracked, warped, sticking or not closing fully

• One dispenser gate

• Disconnect power to the appliance before starting any repair
• Remove the dispenser bezel or access panel per your model's service instructions to access the gate
• Handle plastic parts carefully to avoid cracking; reinstall screws snugly but do not overtighten

This replacement funnel directs detergent or rinse-aid into the dishwasher dispenser for proper delivery during the wash cycle, restoring consistent cleaning and preventing spills or residue buildup around the dispenser area. What it does:

• Channels detergent or rinse-aid from the dispenser cup into the wash chamber for proper cleaning
• Helps prevent spills and messy residue around the dispenser
• Reduces risk of blockages that can stop detergent from reaching dishes
• Addresses symptoms like detergent collecting in the dispenser, visible residue, or poor dispensing

• Disconnect power to the appliance before starting any work
• Remove the dispenser assembly to access and replace the funnel
• Handle replacement funnel and surrounding plastic carefully to avoid cracking
• After installation, run a short test cycle to ensure proper dispensing and no leaks