Refrigerator Drawer, Shelf, Pan

This slide crisper cover is the glass shelf that sits above the refrigerator crisper drawer, helping protect produce and keep cold air circulating. It restores a smooth sliding surface and a finished interior appearance. What it does

• Replaces a cracked, chipped or missing glass cover that sits over the crisper drawer
• Provides a stable, low-profile shelf for storing fruits and vegetables
• Allows the crisper drawer to slide smoothly when in place
• Helps keep food separated and contained, reducing spills onto lower compartments

• One slide crisper cover

• Remove food and the crisper drawer before installing to avoid damage or injury
• Lift the old cover straight up to remove; set the new glass into the tracks so it seats evenly
• Handle glass with care and wear gloves to protect hands from sharp edges
• Check tracks for obstructions or damage before forcing

This guide rail is the sliding track that supports and guides a freezer or refrigerator drawer for smooth opening and closing. Replacing a worn or damaged rail restores stable movement and proper drawer alignment. What it does:

• Provides a stable track for the drawer to slide in and out smoothly
• Prevents drawer sagging, sticking, or misalignment during use
• Reduces scraping, grinding, or noisy movement from a damaged rail
• Helps the drawer fully seat and latch properly when closed

• One guide rail as shown

• Disconnect power to the appliance before servicing to avoid shock
• Remove the drawer per the appliance manual to access the rail assembly
• Inspect mounting clips and screws; reuse only parts that are undamaged
• Align the rail fully and secure fasteners; test drawer motion before returning to service

This left-side basket cradle replaces a damaged or worn support that holds and stabilizes a removable basket. It restores proper basket alignment and prevents rubbing or sagging so the basket operates smoothly. What it does:

• Supports the left side of the basket to keep it level and secure during use
• Prevents the basket from rubbing against the cabinet or other components
• Restores proper fit and alignment for smooth sliding and operation
• Helps eliminate noise and uneven movement caused by a broken cradle

• Disconnect power to the appliance before starting any repair
• Remove the basket to access the cradle; retain all fasteners for reassembly
• Align the cradle and snap or fasten it into place; verify the basket slides and seats correctly
• If hardware is damaged or missing, replace with OEM-specified fasteners

This track is the replacement support rail that guides and stabilizes a sliding component so it moves smoothly and stays aligned. Replacing a worn track restores proper slide action and reduces binding or scraping. What it does:

• Guides a drawer, rack or assembly along a straight path to prevent tipping or catching
• Keeps the sliding component aligned for smooth opening and closing
• Reduces noise and wear caused by a worn or damaged rail
• Common symptom: drawer or rack sticks, drops, or moves unevenly when operated

• Disconnect power (or unplug appliance) before starting repairs to reduce shock risk
• Keep track of all screws, clips and any retained fasteners during removal
• Use basic hand tools; support the sliding component while removing/installing the track

Left hand side

This slide and bracket assembly restores smooth, supported movement for a refrigerator or freezer drawer. It replaces a worn or broken glide and helps the drawer open and close properly for reliable food access. What it does

• Provides the sliding track and mounting bracket that support a refrigerator/freezer drawer
• Restores smooth glide and proper alignment when original slide is bent, cracked or worn
• Helps eliminate drawers that stick, sag or fall out when opened
• Supports the drawer weight and guides it into place during use

• One slide and bracket assembly as shown

• Disconnect power to the appliance or remove food before starting to reduce risk of injury
• Typical install requires removing the drawer to access and replace the slide and bracket; retain screws or clips for reuse only if in good condition
• Inspect mating parts (drawer edges, cabinet track) for damage and replace if needed to ensure proper fit

This Is A Lh Meat Pan Track Only(Pan Not Included)

Left hand side. For the right hand side order 241674402

This ice cream shelf rail guides and secures the freezer's ice cream shelf so tubs stay level and accessible. It restores proper shelf alignment and prevents sliding or rattling of the ice cream compartment shelf. What it does:

• Holds the ice cream shelf in place so frozen goods stay stable during door movement
• Guides shelf slides to keep the shelf aligned and prevent binding
• Reduces shelf rattling and noise from the ice cream compartment
• Helps restore proper shelf seating after a broken or worn rail

• High-level replacement; remove shelf and slide to access rail mounting points
• Use common hand tools; support shelf while loosening or tightening fasteners
• Disconnect power only if working near electrical components; exercise caution with sharp edges
• If screws or clips are missing or damaged, replace them before final reassembly

This slide rail replaces a damaged or worn drawer support to restore smooth opening and closing of the appliance drawer. It provides a stable guide that helps the drawer track properly and reduces sticking or uneven movement. What it does:

• Guides the drawer along its track for smooth, controlled motion
• Prevents drawer sagging and binding caused by worn or bent rails
• Helps maintain proper alignment so the drawer opens and closes evenly
• Commonly replaced when drawers feel loose, jam, or pull unevenly

• One replacement slide rail

• Turn off power and remove contents from the drawer before starting work
• Remove the drawer per the appliance service instructions to access the rail
• Compare the new rail to the old part to ensure correct orientation and fit
• Use proper hand tools; avoid forcing parts to prevent damage to surrounding components

This mounting bracket secures internal components to the appliance chassis to keep parts aligned and reduce movement during operation. It restores stable support so attached parts function reliably and quietly. What it does:

• Secures a component or assembly to the appliance frame to prevent shifting or sagging
• Maintains proper alignment of parts for reliable operation
• Helps reduce vibration and noise caused by loose or unsupported components
• Worn or broken brackets can cause rattling, misalignment, or intermittent part failures

• One mounting bracket

• Disconnect power before servicing to avoid electrical shock
• Use appropriate hand tools; keep fasteners for reinstallation unless new ones are specified
• Inspect surrounding components and mounting hardware; replace any stripped or damaged screws

This Support (mounting bracket) secures internal components and shelves so they stay aligned and stable during normal use. It restores proper support to prevent shifts or sagging that can interfere with door or shelf operation. What it does:

• Replaces a damaged or broken support bracket that allows shelves or panels to shift or sag
• Restores proper alignment for stable shelf or component mounting
• Helps eliminate rattling or movement caused by a loose or cracked support
• Fits where a single bracket is used to anchor interior parts

• One Support (mounting bracket)

• Disconnect power before beginning any repair and work with an empty compartment
• Removal usually requires basic hand tools (screwdriver or nut driver); retain fasteners for reuse unless damaged
• Inspect surrounding parts for wear and replace additional damaged supports as needed

This is a GE refrigerator right drawer slide rail. The drawer slide rail makes opening the refrigerator drawers easier by providing them a track to slide on. If the drawers on the refrigerator have gotten hard to open or are jammed, the problem is most likely with the slide rails. These parts can become damaged over time from general wear or overuse. Any heavy impacts could also bend or warp these rails, warranting the need for a replacement. Do not attempt to bend the drawers to fit the rails, as this may cause further damage. To install the new slide rail, make sure the old one is removed, and the holes for the screws are clear. The new part should come with new fastening screws. Line the rails up with the corresponding holes and insert the screws one by one. Insert the second slide piece onto the drawer with the appropriate screws for this piece. Tilt the drawer at an angle and position the rollers into the rail and slowly insert the drawer.This is a genuine OEM replacement product sourced directly from GE. This part is compatible with GE and Hotpoint appliances.

This is for the left hand side