Remington Log Splitter Parts

This throttle return spring is a genuine MTD part, sold individually. This throttle return spring can be used as a replacement part in a snowblower or a log splitter. The purpose of a throttle return spring for one of these small engine outdoor appliances is to facilitate the opening and closing of the throttle in conjunction with the operator releasing or engaging the gas pedal of the appliance.If the throttle return spring can no longer facilitate the opening and closing of the throttle, the throttle return spring should be removed and replaced by this genuine OEM replacement part before the log splitter or snowblower is used again.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This throttle return spring is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, and Yard Man.

This is a genuine carburetor insulator gasket that is designed to fit select models of lawn mowers. The carburetor insulator gasket is responsible for insulating the carburetor to create a strong seal between it and the engine block and insulate it from the excess heat. This gasket is subject to constant pressure and extreme heat, which can cause it to compress, warp, or become otherwise damaged as a result of regular use. Gaskets should be on the routine maintenance schedule and should be inspected every time other repairs are performed. Without functional gaskets, the engine may run poorly or may not run at all. This genuine OEM carburetor gasket is manufactured by MTD. It can be used in select machines from this brand, as well as those from Troy-Bilt, Cub Cadet, HUSKEE, Yard Man, and Yard Machines. There are hundreds of compatible units that take this gasket. The gasket is made of durable composite materials and sold as an individual unit. Hardware and additional components will require another purchase. Be sure to allow the engine to cool and use the appropriate tools for proper installation without damaging the gasket. Always drain the fuel system before working on the carburetor or internal engine components.

This governor spring is a genuine MTD part, sold individually. This governor spring can be used as a replacement part in lawn mowers, tillers, leaf blowers, log splitters, and wood chippers. The purpose of a governor spring for these outdoor appliances is to facilitate the opening and closing of the throttle which helps the appliance maintain its even pace and speed while in operation.The governor spring in an outdoor appliance might have to be replaced if it loses its spring tension. This could occur as the result of a collision with a hard object or due to general wear and tear over long-term use. If this damage prevents the governor spring from serving its typical function, it should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This governor spring is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Troy-Bilt, Yard Machines, Huskee, Yard Man, and MasterCut.

This recoil spring and pulley assembly is used in a variety of small gasoline engines that power devices such as mowers, lawn tractors, and log splitters, among other yard and landscaping devices. The assembly works by tightly coiling the spring in the starter housing. When the starter rope is pulled, the tension on the spring is suddenly released, creating a spark that fires the air/fuel mixture. The combustion starts the engine. The constant tightening and releasing of the tension at times will cause wear on the spring, resulting in the need to replace the spring and pulley assembly. To replace the recoil starter assembly, begin by removing the housing. Next, untie or starter rope and check to see if it is frayed and needs to be replaced as well. Remove the old assembly and install the new unit. Remember when re-tensioning the spring to wind the pulley in the opposite direction. Holding the pulley tightly so the spring does not release, attach the cap. Reattach the rope and coil it around the pulley. It is advisable to wear gloves for this task because the pulley and springs have sharp edges. This OEM certified replacement assembly is compatible with Yard-Man, Husky, Cub Cadet, MTD, Yard Machines, and Troy-Bilt yard equipment.

This valve spring retainer is a genuine OEM replacement part that is designed for use with select snowblowers and snow throwers. The valve spring retainer is responsible for holding the valve spring in place, which then controls the valvetrain. The retainer secures the spring so that it can provide the right amount of pressure to ensure that the system can operate without valve b, which can damage the engine or cause faulty operation. If the valve spring retainer fails or is damaged, which can happen with regular use over time, it will need to be replaced to ensure the spring remains in place during the operation of the machine. The retainer is a metal collar-type piece and although it is durable, it could wear out or break due to several different potential situations. Regardless of the cause, a replacement must be made with an OEM part like this. This genuine part is manufactured to specific OEM standards by MTD, and is compatible with more than 150 units from MTD, Yard Machines, Yard Man, Troy-Bilt, Husky, and Cub Cadet. It is sold individually. Be sure to wear gloves and allow the unit to cool completely before performing any type of repairs.

This is an exhaust valve adjuster that makes up part of the engine in several types of lawn and garden equipment. It's made of durable metal and works with the valves in the tool. Whenever a valve opens, the exhaust valve adjuster moves the valve a small degree. The purpose of this is to prevent deposits of carbon from building up on the valve and the valve seat. Having cleaner valves helps drop emissions and can prevent guttering and burning of the valve seat and face.If the exhaust valve adjuster is damaged, it will need to be replaced. This involves taking the motor out of the equipment and pulling apart the engine. Store the parts so they will be easy to put back together later. Add oil to the exposed metal surfaces before taking out and cleaning the valves and heads. Remove the exhaust valve adjuster that is damaged and replace it with a new component.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The exhaust valve adjuster is compatible with lawnmowers, log splitters, and snowblowers manufactured by Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Yard-Man, and Huskee.

This is an oil dipstick assembly that is a crucial part of many types of lawn and garden equipment. The dipstick is made of quality plastic and metal and is located inside the oil fill tube. The purpose of the part is to indicate how much oil is currently in the engine. Regular use can cause this component to wear out or become damaged over time. When this occurs, it's not possible to determine how much oil is present so the oil dipstick assembly will need to be replaced.Replacing the oil dipstick assembly is a simple and quick process. No tools are needed to make the replacement. Turn off the equipment and access the oil fill tube. Unscrew and remove the old oil dipstick tube before replacing it with the new component. The equipment can then be used as normal.This oil dipstick assembly is a genuine OEM replacement part that is directly sourced from the manufacturer. The part is sold on an individual basis. This component is made for use with lawnmowers, snowblowers, tillers, leaf blowers, log splitters, and wood chippers created by MasterCut, Yard-Man, Huskee, MTD, Yard Machines, Troy-Bilt, Cub Cadet, and Craftsman.

This carbon canister is a device used to control the amount of gas pollution that is released from small engines found in various lawn and garden machines. This is a genuine OEM replacement part that is sourced from the manufacturer. It is an emission control device also known as a charcoal canister. As gas evaporates from the fuel tank, the carbon canister catches the fumes and releases them into the engine so that they are not dispersed into the atmosphere. Age and regular use may cause the canister to crack or break and not hold the fumes inside. Typical signs that the canister needs replaced include strong fuel odors or leaking from the canister. If the canister is flooded by fuel, the canister will not operate properly. Fuel will spill out, and the canister will need to be replaced. Before replacing the carbon canister, empty the fuel from the machine and remove the spark plug wire for added safety. This repair should be made in a well-ventilated area.The carbon canister is made from heavy-duty plastic and is sold as an individual unit. It is compatible with tillers, chippers, and other small engines manufactured by MTD, Cub Cadet, Yard Machines, and Troy-Bilt.

This silencer plate is used on a variety of outdoor lawn and garden machines to reduce the noise from the air intake. This molded plastic part sits on top of the carburetor and houses the air filter. It provides an added layer of noise muffling. Exposure to wind, rain, and heat can cause the plastic to become brittle and cracked. The silence plate should be replaced if damage is discovered during routine maintenance. A screwdriver is needed to replace the silence plate. Before working on the machine, make sure the engine is cool and remove the spark plug. Remove the air filter cover and the air filter to access the silencer plate. Remove the screws holding the plate in place. Install the new silencer plate. Tighten the screws. Install the air filter and housing cover. This silencer plate is made of durable molded plastic and is sold individually. It is a genuine OEM replacement part sourced directly from the manufacturer. This part is compatible with tillers, chippers, shredders, and small engines manufactured by Cub Cadet, MTD, and Yard Machines.

This air filter cover is a genuine OEM replacement part sourced directly from the manufacturer. It is designed to fit various lawn and garden engines. The air filter cover is a durable plastic piece that snaps to the machine to cover the air cleaner and filter to protect them from external dirt and debris that would shorten the filter's lifespan. This cover is exposed to the elements, and may be damaged by rocks and other debris during machine use. Normal wear and tear due to age can also lead to the cover's damage. If the cover is damaged, it should be replaced. The machine should not be operated without a functional air filter cover.Wear gloves when doing any work on the machinery. Unsnap the cover and remove it from the machine. Remove the spark plug before starting to prevent accidental engine operation. While the cover is off, check the air filter and air cleaner. If necessary, change these out while the cover is being serviced. Snap the new cover into place. This air filter cover is made of durable black plastic. It is sold as an individual unit that is compatible with tiller engines and other small engines manufactured by Cub Cadet, MTD, and Yard Machines.

This is a starter recoil assembly. It is used when starting small lawn equipment and other machines. It engages the flywheel. With time and use, any or all of the recoil can wear out or become damaged, including the spring, housing, rope, or pulley. If something is damaged or worn out, the entire starter recoil assembly must be replaced. Signs that the part requires a repair include an engine that won't start or has difficulty engaging.Replacing a starter recoil assembly is easy and can be done in about 15 minutes. A nut driver and screwdriver are required for the repair. Wear gloves. Make sure the equipment is completely cooled before beginning the recoil assembly replacement. After putting tension on the spring and pulley, hold the housing securely to prevent it from releasing.The starter recoil assembly is a genuine OEM-authorized replacement part. It is sold individually. The starter recoil assembly is compatible with MTD, Cub Cadet, Yard Machines, Husky, Yard-Man, and Troy-Bilt brands. It is a complete part that includes the housing, rope, pulley, and recoil spring. It works with small engines, lawnmowers, log splitters, trimmers, and other similar equipment.

This genuine MTD carburetor assembly provides all of the components to replace a carburetor, including the fastening elements. The purpose of a carburetor is to combine the fuel and air intake into a particular ratio that is ignited by the spark plugs to run the engine. This carburetor assembly contains the carburetor itself and the primer bu. The carburetor assembly might have to be ordered as a complete replacement if there is damage to the carburetor that also affects the fastening parts that attach the carburetor to the engine. If the damage cannot be attributed to a smaller part, the full carburetor assembly should be ordered as a replacement for the damaged carburetor and its attachments. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This carburetor assembly is compatible with log splitters and chipper shredders made by the following brands: MTD and Cub Cadet. This part is sold individually.

A starter handle is a piece that works in combination with several other components to start the engine in numerous machines, including lawn equipment. It works when the user pulls the starter handle grip, attached by a mechanism to the crankshaft. It turns to start the engine. If the starter handle breaks, it will have to be replaced in order to start the machine. Starter handles can become damaged from normal use, misuse, or after an accident.Replacing the starter handle is a simple project. After locating the mechanism it attaches to, typically a sturdy rope or cord, the starter handle should be tied securely to the end of the string. Wear gloves to protect the hands during the process. Test the strength of the attachment before trying to start the machine.This starter handle is a genuine OEM replacement part. It is sold as an individual piece. This starter handle is made of durable, high-quality material. It can be used in devices from MTD, Husky, Troy-Bilt, Yard Machines, and Yard-Man. It is compatible with various lawnmowers, log splitters, trimmers, and other devices with pull start engines.