Microwave Run Vent User Control Display Board Parts

My Advantium worked fine except the clock and cooking instructions were dim and bounced in a circular pattern over the left side of the display. I tried unplugging it and once or twice that seemed to help. When I finally decided to take the control panel off I had a difficult time until I saw an old remark from a 2009 forum discussion from a guy that said there were about a dozen screws to remove to get to the control panel. That meant the entire cover had to come off! Wow! Glad I didn't break... Read more

First I replaced the flickering digitron after reading elsewhere that it may be just a weak display. The new digit on was still flickering but a little differently. Our oven was still working with either display until suddenly it wasn't one morning. After finding AppliancePartsPros and reading that others had to go further by replacing the transformer and power boards, that's when I looked closer at those parts. There was some smoke evidence on the cover over the transformer and the back of... Read more

First I replaced the flickering digitron after reading elsewhere that it may be just a weak display. The new digit on was still flickering but a little differently. Our oven was still working with either display until suddenly it wasn't one morning. After finding AppliancePartsPros and reading that others had to go further by replacing the transformer and power boards, that's when I looked closer at those parts. There was some smoke evidence on the cover over the transformer and the back of... Read more

Needed installation parts. I ordered the parts from the company I purchased the appliances from. A week went by and no parts, called, emailed and called again to find out when the parts would arrive to be able to Re-schedule the installation. After the run around, I found AppliancePartsPros website and placed my order with them. I received the parts I needed within the time they promised. I was able to schedule my installation to enjoy my new appliance. It's been almost 4 weeks and still no... Read more

Needed installation parts. I ordered the parts from the company I purchased the appliances from. A week went by and no parts, called, emailed and called again to find out when the parts would arrive to be able to Re-schedule the installation. After the run around, I found AppliancePartsPros website and placed my order with them. I received the parts I needed within the time they promised. I was able to schedule my installation to enjoy my new appliance. It's been almost 4 weeks and still no... Read more

Bought a new home with microwave venting into kitchen. Ordered damper assembly needed to vent through the wall to the outside. Removed microwave, followed directions in original installation instructions, turned fan over, cut hole in wall, installed wall cap and replaced oven. Problem solved. Read more

Replaced the "Encoder Board". My GE Advantium control panel came of fairly easily. There was 2 screws on top to remove a vent director giving access to a single screw that held the control panel in place. Once I removed that screw, I had to slide the control panel upwards by about 1/2" before it came off. At this point, I took several photographs of the wire connections to make sure I could reassemble them correctly... there were many! After unplugging the wire harnesses and connections, I... Read more

Ordered parts from appliance parts pros and downloaded instructions.. Read more

We bought a house with an over-the-range microwave, which just recirculated air into our house--not effective for smoky meals! We removed the microwave and cut a hole to send the exhaust out the back of the microwave (and out of our house), but realized we were missing this damper and frame that go on the back of the microwave for rear exhaust. The parts fit perfectly and now we can enjoy a smoke-free kitchen! Read more

We followed the manufacturer's instructions about re-positioning the fan motor and installing the vent damper (easy). We constructed a duct system from the microwave to the outside of the house (challenging). We used 3.25" x 10" metal duct to start the system through the wall behind the microwave, where we added framing to reinforce a cut stud. We ran the duct up a closet wall and through its ceiling into the attic. We had to make an offset duct piece from 3.25" x 10" metal duct to clear a... Read more

This damper was added to the outside vent duct line as an additional block against outside air intrusion. Under spousal orders I had just changed the microwave vent to the outside (the proper way to go, but much more difficult to accomplish) but then there was some "flowback" when the wind was pressing against the back of the house (westward facing), and I was ordered to reduce this flow before the winter arrived in full force. There is this same damper on the microwave unit itself, but I... Read more

I contacted Appliance Parts Pros, and told them what the problem was and what it was doing. They sent me an email with the parts number needed to complete the repair. This was a built in a cabinet unit and I required help removing it and reinstalling it. The repair was relative easy once I had the parts and it took approximately four hours,. It took longer getting to the defective parts than replacing them. ... Read more

After looking at your site, the parts diagram, and consulting via chat, we ordered the wave guide replacement part. Installed the new wave guide and the appliance works perfectly. We also cleaned the inside of the appliance per the instructions in the guide. Read more

After researching on the internet, I decided replacing the wave guide cover would be much cheaper than replacing the microwave. Plus I couldn't even find one that worked with the existing trim kit. Had a bit of difficulty removing the old cover, but the folks at Appliance Parts Pro answered my email question within 24 hours. I received the replacement part a day or so later. GREAT CUSTOMER SERVICE! Thanks! Read more