Washer Drum Support Roller Parts
Genuine Ge part
By: Ge
Part Number: WH03X32097
Transmission pulley and nut for top-load washers. Transfers motor power to the drum for spinning and agitation. Replace if cracked, worn, or damaged.
Do-It-Yourself Stories from Customers like You
Clothes still wet after spin cycle Robert B. • Vicksburg , MS • December 20, 2025
New water pump and new drive belt
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 285219
The Suspension Pad Kit is an OEM part for Whirlpool washers. It is a kit that includes 3 suspension pads designed to provide stability and reduce vibration during the washer's operation. These pads are designed to absorb shocks and prevent excessive movement.
You should replace the suspension pad kit if the pads become worn out or damaged. Causes of bad suspension pads can include regular wear and tear, overloading the washer, or continuous exposure to high levels of vibration and movement.
Symptoms of bad suspension pads include:
- Excessive shaking or vibrating during the wash or spin cycles
- Loud banging noises coming from the washer
- The washer moving or "walking" during operation
- Uneven or unbalanced loads despite proper loading
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
It was dancing around the floor when it went into the spin cycle Harry W. • Landisburg , PA • January 19, 2020
First went through the troubleshooting guide on the website and read the various stories and watched the repair videos for replacing the springs and suspension pads. Then before ordering any parts disassembled the machine only to the point of removing the cabinet to see if there were any obvious issues. The springs appeared OK but I couldn't tell of they were fatigued or not and all were in place but the tub suspension pads were definitely worn out. I then put the machine back together and went...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304485917
Shock absorber kit for front-load washers. Includes 2 absorbers, pins, and hardware. Replace when broken, cracked, or worn to restore stability.
Do-It-Yourself Stories from Customers like You
Very noisy then ultimately bearing failure and a broken shock mount Brian B. • Canton , NY • September 23, 2014
I watched the video posted by Jerrod Sessler on yellow van handyman.com. Then I had to unstack the dryer from the washer, remove all covers, disconnect all hose connections, shock mounts and springs and remove the tub assembly. Then I disassembled the tub assembly and remove seal and both bearings from the rear half. At this point I cleaned everything. I installed new bearings and seal, installed the basket and assembled both tub halves using a new gasket and silicone, and reinstalled the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10822553
Shock absorber mounts to the washer tub to dampen spin cycle vibrations. Replace if cracked, broken, or worn to restore stability and reduce noise.
Do-It-Yourself Stories from Customers like You
Our whirlpool duet washer was very noisy during spin cycles Linda M. • Kiel , WI • September 25, 2014
We looked online at AppliancePartsPros.com under the symptoms and found it was most likely caused by the shocks. Of course there was a repair video showing how to replace all four shocks step by step, and there was a link for purchasing the four shocks at the bottom of the video. Our repair didn't go quite as quickly as on the video because we are novices, but we were able to do the repair ourselves and, once again, saved ourselves a ton of money! Now we have a very quiet washer and dryer again...
Read more
More
Genuine Ge part
By: Ge
Part Number: WH16X26908
Suspension rod and spring assembly for top-load washers. Mounts between cabinet and wash basket to absorb vibration. Replace if worn, stretched, or broken.
Do-It-Yourself Stories from Customers like You
Out of balance when trying to go into spin cycle. Ken R. • Eugene , OR • August 18, 2020
Cleaned off the oil or grease that somehow was all over the drive belt. Installed new drive belt.
Installed 2 new left (blue) and 2 new right (red) rod and spring assembly.
This fixed the out of balance issue during spin cycle.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10247710
This kit includes suspension rods and dampers that support the wash tub inside a top-load washing machine, absorbing vibration and movement during the spin cycle. The rods connect the outer tub to the cabinet frame to keep the tub centered and stable. Replace this kit if your washer shakes excessively, makes loud banging noises during spin, or if the tub appears to hang unevenly.
Do-It-Yourself Stories from Customers like You
I had a unbalance issues and then lid lock issues no codes Linn P. • Dixon , IL • October 14, 2014
I read through the issues related to my problems. I purchased both parts so if one was fixed then the other still needed to be fixed I would have the part. I watched both videos for replacing the parts which made things so much easier. I will say prying in the front clips was the biggest issue out of the whole repair. I repaired the suspension issue by replacing the 4 rods. The very last rod that I replaced was indeed bent. I closed the top and ran one load and then the lid lock issues...
Read more
More
Genuine Ge part
By: Ge
Part Number: WH16X26909
Left suspension rod and spring assembly that supports and stabilizes the washer tub. Replace if worn, damaged, or causing excessive vibration noise.
Do-It-Yourself Stories from Customers like You
Out of balance when trying to go into spin cycle. Ken R. • Eugene , OR • August 18, 2020
Cleaned off the oil or grease that somehow was all over the drive belt. Installed new drive belt.
Installed 2 new left (blue) and 2 new right (red) rod and spring assembly.
This fixed the out of balance issue during spin cycle.
Read more
More
Genuine Ge part
By: Ge
Part Number: WH03X32218
Motor pulley with nut for top-load washers. Transfers power from motor to drum. Replace if pulley teeth are stripped, cracked, or sheared off.
Do-It-Yourself Stories from Customers like You
The washer would not spin. Clayton B. • Calhoun , LA • October 13, 2023
Replaced thr motor pulley and transmission pulliey and belt.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11400156
Four suspension rods with bushings that secure the washer tub and absorb vibrations. Replace if rods are cracked, worn, or bushings are damaged.
Do-It-Yourself Stories from Customers like You
Horrible vibrations when rinsing Ralph C. • Ontario , CA • October 11, 2026
Replacement suspension rods did the trick
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11130356
Suspension rod kit connects washer drum to chassis for vibration control. Replace if rods are worn, broken, or detached causing instability during spin.
Do-It-Yourself Stories from Customers like You
Not sure but constantly out of balance Jeff A. • Lakeland , FL • May 11, 2026
Replaced the suspension rods
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8182703
The Shock Absorber is an OEM part for Whirlpool washing machines. This component is essential for reducing vibrations and stabilizing the washer drum during operation, particularly during the spin cycle. It helps to absorb shocks and minimize excessive movement, ensuring the washing machine runs smoothly and quietly.
Note: The unit requires a quantity of 4. Package includes 1 only; order as needed.
Symptoms of a failing Shock Absorber include:
- Excessive shaking or vibrating of the washing machine, especially during the spin cycle
- Loud banging or thumping noises during operation
- The washing machine moving or "walking" across the floor
- Visible damage or wear to the shock absorber
Causes of a bad shock absorber can include wear and tear from regular use, heavy or unbalanced loads that put extra strain on the absorbers, or physical damage from impacts or mishandling.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Whirpool duet 10 years old drum would make a rocous during spin cycle Jose F. • Pflugerville , TX • December 06, 2014
Ordered the springs and shocks. Noticed that the washer had placement for 4 springs, but the factory only installs 2 (or they forgot to install the other two on my machine).
If you replace the springs, be sure to check for the spring bracket mount. You will also need those.
The washer is running fine. Next I'll work on the dryer.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10440786
Set of four suspension rods and springs that support the washer tub. Replace if rods are bent, broken, or loose at mounting points for proper tub support.
Do-It-Yourself Stories from Customers like You
Whirlpool top of line Timothy B. • Cocoa Beach , FL • October 11, 2020
Watching the video.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11396716
The SUSPENSION KIT is an OEM component specifically designed for Whirlpool brand top-loading washing machines. It incorporates external shock-absorbing mounts that cushion washer movement during spin cycles.
Causes of a bad suspension include general wear from years of tumbling loads. Exposure to physical impacts that stress mount points introduces further risk.
Symptoms of a bad suspension involve:
- Visible washer wobbling or imbalance during spinning
- Audible vibrations traveling into surrounding structures
- Mounting feet failing to securely anchor washer in position
Replacing it with this genuine Whirlpool part restores stability and extends product life. Vibration control safeguards inner tub bearings while enhancing user experience.
Note: set of 4. Includes suspension bushings and suspension balls.
This OEM Whirlpool replacement suspension is also compatible with Maytag, Magic Chef, Roper, and some Kenmore top-loading washer models. Dependable cushioning maximizes laundering efficiency cycle after cycle.
Do-It-Yourself Stories from Customers like You
Tub was shaking really bad Franklin G. • Hurricane , WV • January 02, 2026
New suspension rods
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10780051
Suspension rod kit connects the outer tub to the washer base for support and stability. Replace when rods are worn, broken, or causing excessive movement.
Do-It-Yourself Stories from Customers like You
Tub was banging against the side of the washer Chris Z. • Lewisburg , TN • August 11, 2014
Rebalanced the load but noticed the drum was sitting lower and the springs were wore out and it went out of balance easy, so i got the suspension rod kit and installed it and it works much better. It took me 2 hours because i didnt have adequate room to move around. Hour job if you have room.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 203956
Three-pad kit that cushions and stabilizes the wash tub assembly. Replace when pads are worn, compressed, or missing to restore proper vibration dampening.
Do-It-Yourself Stories from Customers like You
May tag washer bumper pads wore out Larry W. • Hookstown , PA • November 18, 2014
I ordered parts from appliance parts pro at 3:30 on Friday and they were delivered at bout noon on Saturday the next day. Took the machine apart removed the old pads. With the directions in the packages put it back together and the wife ran 5 loads of clothes through it. Works great. Was awesome to get the parts so quick
Read more
More
Genuine Lg part
By: Lg
Part Number: 4434ER0002H
Central hub that connects the inner tub to the drive shaft in washers. Replace if corroded, cracked, or arms have broken off causing wobble or imbalance.
Do-It-Yourself Stories from Customers like You
Burnt rubber smell at end of cycle from 11 yr old lg wm2277hw front load washer i hand spun inner drum it was rotating in an oblong manner so thought shaft was bent Kirk E. • Eagan , MN • October 22, 2015
Looked online at several websites to see if I could figure out the problem Came across AppliancePartsPros video on replacing bearings. Watched it a couple of times and determined (well, guessed) it was the bearings and/or spider. Followed the video (great job by the way) and disassembled the washer. The spider was cracked on one arm so ordered a new one from this site. I also ordered two new bearings and the bearing seal b/c learned from the web and local appliance store that they go bad in 7+...
Read more
More