Washer Panel Control Knobs Parts
Genuine Ge part
By: Ge
Part Number: WH12X10202
If your washer won't shut off or won't advance through cycles, the timer may have failed. This repair typically takes 10-15 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Washer did not shut off and did not cycle properly Dan F. • Gig Harbor , WA • August 10, 2014
Easy. Opened the front panel, removed the timer, went on line with the part number. Part arrived the next day and I installed it in 2 minutes. FIXED.
Read more
More
$169.50
- Compare At:
-
$200.01
- You Save:
-
$30.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001252
Fix a washer that won't advance through cycles, stops mid-wash, or skips stages. This mechanical timer controls wash, rinse, and spin sequences.
Do-It-Yourself Stories from Customers like You
10+ year old bad washing machine timer Johnny Q. • Philadelphia , PA • January 18, 2015
Took out old timer, and upon inspection notice some electrical arcing( burned areas). I installed new timer and worked perfectly.
Problem was that it would fill up with water, but after it was filled the timer kept going but washer was not agitating. Only thing that worked was delicates wash.
Important Disconnect/ unplug power cord!
1. Remove knob, center cap pops off revealing a pin. Slide that off and the knob should come off.
2. Removing knob should reveal 2 socket screws remove...
Read more
More
$201.37
- Compare At:
-
$237.62
- You Save:
-
$36.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001638
Fix a washer that won't agitate or advance through cycles with a timer replacement. Controls wash, rinse, and spin stages. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Washing machine quit agitating on normal cycle and only agitate on delicate Gary F. • Royal Palm Beach , FL • March 10, 2015
I called AppliancePartsPros and gave them the detail of my problem and that I thought that the timer may be bad. The guy on the phone with me talked to the technical group and came back and told me that they thought that it was the timer. The timer was ordered and the price was $50 cheaper then a local rep here at home. Anyway the part was ordered and came in less then 2 days and when I replaced it the problem was taken care of. The service, price, and time to get the part was great and I...
Read more
More
$252.39
- Compare At:
-
$297.82
- You Save:
-
$45.43
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10111389
Fix a washer that won't advance through cycles or gets stuck mid-wash. This timer controls cycle sequencing. Most DIYers complete this repair in 20 minutes.
Do-It-Yourself Stories from Customers like You
Bad timer Jrichard M. • Huntsville , AL • November 13, 2014
Ordered a new timer from Appliance Pros.com
Read more
More
$161.95
- Compare At:
-
$194.45
- You Save:
-
$32.50
Genuine Lg part
By: Lg
Part Number: EAM60991301
Fix no power, intermittent shutdowns, or breaker trips by replacing the noise filter assembly. Filters EMI from AC power to protect the control board.
Do-It-Yourself Stories from Customers like You
No power to start dishwasher Joe M. • Knoxville , TN • April 17, 2020
Checked circuit breaker to d/w first. Good. Went to website to see no power issues. Most all of them mentioned the noise filter being the problem. Removed filter from machine and found the corner melted where fuse is located. Ordered new filter, installed, and now have power to switches. All the information I found on the website really made this a easy job to get done.
Read more
More
$75.95
- Compare At:
-
$90.38
- You Save:
-
$14.43
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10491734
The Coin Slide Interface is an OEM part for Whirlpool commercial washers. It is a component that allows users to insert coins or tokens to activate the machine and initiate the laundry cycle.
Causes of a faulty coin slide interface can include regular wear and tear, damage due to misuse or vandalism, or electrical component failure. These factors can result in issues such as coin rejection, incorrect coin counting, or the inability to start the machine using coins.
Symptoms of a Bad Part:
- Will not start
- Not washing properly
- Timer will not set
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
More
$55.95
- Compare At:
-
$67.14
- You Save:
-
$11.19
Genuine Whirlpool part
By: Whirlpool
Part Number: W11116592
Fix a washer that won't advance cycles, starts on its own, or overfills with this electronic control board. Requires panel removal and wire connections.
Do-It-Yourself Stories from Customers like You
My Maytag washer was stuck on stupid! It wouldn't advance past sensing then it would overfill. David K. • Darby , PA • November 13, 2021
Put a new control board in and problem solved.
Read more
More
$255.74
- Compare At:
-
$294.04
- You Save:
-
$38.30
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001026
If your washer won't advance cycles, runs continuously, or only works on delicate, the timer may have failed. DIY-friendly repair in 15-20 minutes.
Do-It-Yourself Stories from Customers like You
My maytag washing machine model# latxxxxaae would not agitate on wash cycle William C. • Grafton , MA • February 03, 2015
The basin would fill but would not agitate, there was no sound, no grinding noises, no sound of a motor running without agitation due to a broken belt. The basin full of water was able to drain if I advanced the timer to Spin. By playing around with the timer dial further, I could get every function of the washer to operate, at least partially. So, that said electrical problem to me. I assumed the trouble was either the safety switch at the back of the lid or the timer mechanism. Tested...
Read more
More
$181.95
- Compare At:
-
$216.52
- You Save:
-
$34.57
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8182689
This OEM replacement part is a control board for washers. The control board is the main computer that sends signals to the washer to perform its essential functions. If the washer is no longer turning on, spinning, rinsing or draining properly, this could mean that the control board needs to be replaced. Luckily this is a relatively simple repair. To begin, start by shutting off all power to the appliance. Proceed to move the washer away from the wall to gain access to the upper back panel. Remove the upper back panel and locate the old control board. Pull it out of its mounted position and take note of the orientation of the wires attached to the old board. Reinsert the wire harness and individual wire into their correct terminals on the new board. Snap the board back into place and reinstall the upper back panel. This genuine replacement part is sold individually and is compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand washers.
Do-It-Yourself Stories from Customers like You
F11 and eventually dl (door lock) error codes prevented proper operation of the kenmore he4t washer Daniel A. • Saint Johns , AZ • June 01, 2015
After unplugging the washer from the electrical outlet, the top of the washer was removed without a problem in order to allow easy access to the Central Control Unit (CCU) at the top of the back end of the washer. A cell phone was used to photograph the wiring layout and connectors plugged into the CCU, and then all connectors and the harness were carefully removed from the CCU without incident. Attempting to remove the old CCU, the plastic retaining clips built into the old CCU housing broke...
Read more
More
$264.88
- Compare At:
-
$281.96
- You Save:
-
$17.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8542050
Fix a washer that won't advance cycles or spin with a new timer. Controls wash, rinse, and spin phases. Common DIY repair with clear instructions.
Do-It-Yourself Stories from Customers like You
Cycle not advancing on estate washer Paul P. • Alligator Point , FL • November 24, 2015
I looked on your site and found troubleshooting diagnostic and then ordered timer. The timer was not hard to remove and install new one.
Read more
More
$182.50
- Compare At:
-
$215.35
- You Save:
-
$32.85
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10384843
Washer stops mid-spin or shows F6E1 error? The motor control board regulates drive motor speed and direction. Most DIYers replace it in 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Maytag 2000 series washing machine cycle would start fill tub then stop with error code e1f6 Tom W. • Warrenton , VA • June 06, 2014
On-line chat with AppliancePartsPros told me the error code was was for motor speed and they sent me a .pdf file on what to do to T/S it. Following the sheet I checked motor and Tack resistance and wiring - all OK, so I ordered a Motor Controller Ckt board assy. It arrived in 24 hours, during that time i watched the replacement videos and removed the old part. Upon receiving the new part I installed it (15 min), tested the washer (it worked), then put all the panels back on, pushed the washer...
Read more
More
$243.77
- Compare At:
-
$255.79
- You Save:
-
$12.02
Genuine Ge part
By: Ge
Part Number: WH12X10350
Fix a washer that won't advance cycles, stops mid-cycle, or repeats steps. This timer controls fill, wash, rinse, drain, and spin sequences.
Do-It-Yourself Stories from Customers like You
Timer washer was broken Phyllis W. • Delray Beach , FL • June 20, 2014
Was most pleased that you sent an authentic GE part as promised since another company, who advertised same, sent me a refurbished piece that was totally unusable. You also saved us a considerable amount of money. Since we are not knowledgeable about installing electrical pieces, we had the condo handyman do it. It was done quickly and efficiently and works just fine.
Thank you for your good and honest service.------Phyllis Wolpow
Read more
More
$142.95
- Compare At:
-
$171.54
- You Save:
-
$28.59
Genuine Ge part
By: Ge
Part Number: WH42X10650
Rear console housing for washer controls. Supports and protects user interface components. Replace when original panel is cracked, loose, or damaged.
Do-It-Yourself Stories from Customers like You
Broken supporty in backsplash Ronald H. • Louisa , VA • December 20, 2015
Replaced the entire back splash, I would like to give kudos to AppliancePartsPro, the item was shipped in a timely manner
Read more
More
$161.66
- Compare At:
-
$192.38
- You Save:
-
$30.72
Genuine Frigidaire part
By: Frigidaire
Part Number: 137006000
Washer won't start, shows error codes, or cycles randomly? The main control board manages all wash functions. Moderate DIY repair with careful handling.
Do-It-Yourself Stories from Customers like You
Frigidaire gltf2940fs2 front load washer e90 error code Wayne A. • Tewksbury , MA • August 01, 2016
After first doing a Google/YouTube search, There was only one "hit" on my search results. Next I went to an appliance message board forum but after almost a week and more than a dozen views, no response was received. This is unusual. I've been on this board before with positive results. They also changed the "rules" for DIYers which could explain why I didn't have a lot of response from the experts.
I attempted to get the unit into diagnostics mode. I was unable to clear the E90 "general...
Read more
More
$223.30
- Compare At:
-
$265.73
- You Save:
-
$42.43
Genuine Whirlpool part
By: Whirlpool
Part Number: W10861510
White control panel console for washers. Mounts on top back area and houses display buttons. Replace if cracked, broken, or buttons unresponsive.
Do-It-Yourself Stories from Customers like You
Fixed fast and at a great price Charles M. • Cleveland , TN • May 02, 2025
Replaced UI console
Read more
More
$230.28
- Compare At:
-
$274.03
- You Save:
-
$43.75
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304505611
Fix unresponsive buttons or blank displays with this user interface control board. Restores keypad function and display readings on your laundry center.
More
$153.56
- Compare At:
-
$181.20
- You Save:
-
$27.64