Washer Dryer Combo Roller Nut Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 349241T
Rear drum support roller kit for dryers. Mounts behind the drum to maintain alignment and smooth rotation. Replace when rollers are worn or damaged.
Do-It-Yourself Stories from Customers like You
Thumping/vibrating/rattling pretty bad fixed 100%! Doug P. • Durham , NC • November 15, 2015
I am very glad to find the AppliancePartsPros.com website! Their instructional videos and easy parts reference made all the difference. I had originally planned to have someone come to fix my dryer, but no one was available for at least a week. I checked out their site, and after watching the videos I felt confident I could repair my appliance. I determined that a drum roller wheel had gone bad. Apparently it was going bad over the last five years since the dryer always seemed to rattle a...
Read more
More
$18.23
- Compare At:
-
$21.51
- You Save:
-
$3.28
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001541
Replacement drum support roller for dryers. Installs on the drum assembly to allow smooth rotation. Replace when cracked, worn, or making noise.
Do-It-Yourself Stories from Customers like You
Dryer squealing on startup Sandy R. • Manhattan , KS • September 08, 2015
I replaced the belt, belt tension pulley, both dryer drum roller axles and both drum support rollers. Although I bought 2 tumbler bearing kits, because those still look good I am saving them for when they go bad. The videos were fantastic! I also took pictures as I went of wiring so there would be no question where things went when reassembling. It should be noted some models have extra terminals near the sensor terminals... just be aware and look closely/take pics as you are taking things...
Read more
More
$22.53
- Compare At:
-
$30.18
- You Save:
-
$7.65
Genuine Whirlpool part
By: Whirlpool
Part Number: 279640
Replacement idler pulley for dryer drum belt systems. Maintains proper belt tension. Replace if pulley is cracked, worn, or bearings are damaged.
Do-It-Yourself Stories from Customers like You
I had no error code, it is just that when you press start you would hear a click and no actions. Nicholas M. • Miami , FL • June 12, 2020
It was the day of my birthday June 6th when my wife came to me to tell me that the dryer was not working. Immediately I started to look for a new dryer from Best Buy and the rest. Then I said It would be better if I waited for 4th of July at which time I could find a better deal. This is when I decided to take it apart to see what was wrong. Initially, I thought of the belt that could be broken and I rotated the drum by hand and I heard a noise of the belt at times falling on the drum. I was...
Read more
More
$26.95
- Compare At:
-
$31.80
- You Save:
-
$4.85
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304507499
The Idler Arm Assembly is an OEM part for Frigidaire dryers. It is an essential component of the dryer's drum support system, responsible for maintaining the proper alignment and smooth rotation of the drum during operation. The idler arm assembly typically consists of an idler arm, pulley, and bearings, working together to support the weight of the drum and facilitate its rotational movement.
Symptoms of a bad idler arm assembly in a dryer include:
- Loud squeaking or grinding noises during operation
- Excessive vibration or shaking of the dryer
- Difficulty in starting or maintaining the drum's rotation
- Potential damage to other components due to misalignment
Causes of a bad idler arm assembly can include wear and tear over time, damage from foreign objects entering the drum, or issues with the bearings or pulley components. A faulty idler arm assembly can lead to improper drum alignment, increased friction, and potential damage to other parts of the dryer.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Clothes dryer was stalling and turning off Stanley F. • Manhattan Beach , CA • February 06, 2018
Main problem was worn bearings in the motor, which was replaced. Additional issues were worn pulley on tensioner and impeller slipping on motor shaft. Pulley was replaced and hose clamp was used to secure blower on shaft.
Read more
More
$51.62
- Compare At:
-
$61.94
- You Save:
-
$10.32
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90767
The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.
This part fixes the following symptoms:
- Loose or wobbly components within the appliance
- Panels or parts that are not securely attached
- Rattling or unusual noises due to loose parts
- Damaged or missing screw
The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS!
p.s. In doing my research come to find Maytag did little to insulate control panel from oven...
Read more
More
$7.56
- Compare At:
-
$8.90
- You Save:
-
$1.34
Genuine Ge part
By: Ge
Part Number: WH01X10608
Secures the drive pulley to the motor shaft in your laundry center washer. Replace if stripped, missing, or loose to restore a solid pulley connection.
More
$75.22
- Compare At:
-
$89.51
- You Save:
-
$14.29
Genuine Ge part
By: Ge
Part Number: WE2M302
Secures dryer panels, brackets, and internal assemblies. Replace missing, stripped, or damaged screws to restore proper alignment and prevent vibration.
Do-It-Yourself Stories from Customers like You
Dryer door did not close Wendy G. • Yonkers , NY • November 09, 2019
It was easy, I got the model number of my dryer, then I went on google and found your website. You got a perfect diagram of the door of my dryer. After I saw the video relate it to my problem, I purchased the parts that I need it to fix it, I didn’t need my husband to do it for me. I gave him a surprise after he got home for work. It was all done.
Thanks
Read more
More
$12.35
- Compare At:
-
$13.59
- You Save:
-
$1.24
Genuine Frigidaire part
By: Frigidaire
Part Number: 316008401
Size: 3/4 inch od x 1/4 inch id.
Do-It-Yourself Stories from Customers like You
Replaced screws on oven handle and door Jason D. • Bowling Green , KY • February 14, 2016
Secured the inner and outer door together and screwed handle back in place.
Read more
More
$12.16
- Compare At:
-
$13.38
- You Save:
-
$1.22
Genuine Ge part
By: Ge
Part Number: WH38X10018
Mounts on the transmission shaft to transfer motor power for agitation and spin. Replace if worn, cracked, or causing belt tracking issues.
Do-It-Yourself Stories from Customers like You
Transmission pulley gone bad John J. • San Diego , CA • December 03, 2019
By replacing it.
Read more
More
$21.95
- Compare At:
-
$25.90
- You Save:
-
$3.95
Genuine Frigidaire part
By: Frigidaire
Part Number: 131302800
This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.
- Fastens the drum baffle/lifter (vane) to the rotating drum
- Helps maintain proper tumble and load turnover
- Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
- Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes
What's included: One screw
- Disconnect power before servicing; shut off gas
- Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
- Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
- Start all screws before final tightening to seat the baffle evenly
Do-It-Yourself Stories from Customers like You
The pump hose had a tear in it and the water hoses were in bad shape Steven V. • El Cerrito , CA • September 21, 2014
Unscrewed the front lower panel ( 2 screws ). Disconnected the pump hose clamp and removed the hose. I loosened the lower back panel and pulled out the drained hose from the rear. Replaced with new hose put back clamp and panels. Very easy
Read more
More
$17.95
- Compare At:
-
$21.54
- You Save:
-
$3.59
Genuine Lg part
By: Lg
Part Number: 4011FA4353B
Secures the stator to the motor assembly in your washer. Replace if bolt is stripped, spinning freely, or missing to restore proper motor stability.
Do-It-Yourself Stories from Customers like You
The washer sounded like a jet plane when it went through the spin cycle very loud noise Lane C. • Pleasant Garden , NC • February 24, 2015
I originally thought the washer had a bad bearing, but once I got it disassembled it the spider arms were broken. This required the replacement of the tub assembly. While replacing the tub I replaced all of the water bellows. The parts came quickly, the live chat and videos were very helpful. This washer has to be completely disassembled to replace the drum, so mark all the screw locations, tag and bag everything and take lots of pics. It was a very rewarding project and hundreds of dollars...
Read more
More
$11.60
- Compare At:
-
$13.69
- You Save:
-
$2.09
Genuine Lg part
By: Lg
Part Number: 1SZZER4002A
This Screw (drawing) is a factory fastener used to secure appliance panels and components. Replacing a stripped, corroded, or missing screw restores a tight fit, reduces vibration, and helps keep assemblies correctly aligned.
- Secures panels, brackets, and mounting points as specified by the manufacturer
- Replaces screws that are lost, damaged, corroded, or stripped
- Helps address rattling, vibration, or loose-fitting parts caused by missing hardware
- Maintains proper alignment and stability of the assembly
What's included: One screw
- Disconnect power and, if applicable, shut off gas/water before servicing
- Match the screw to its original location; start threads by hand to avoid cross-threading
- Use the correct driver; tighten snugly without over-torquing into metal or plastic
- Refer to your model's parts diagram to correct location and quantity
Do-It-Yourself Stories from Customers like You
Lg washer/dryer combo unit shook upper counter balance weight loose damaging the mount lugs on the tub cover and tore the tub gasket Christine V. • Saluda , VA • March 28, 2020
The upper counter-balance weight mount design is a poor design to begin with. It started to rattle loose approximately 5yrs into the 8yrs that we've owned it. As it would start to loosen up (as evidenced by the loud banging noise exhibited during operation); I'd shut it down, pull the top off, remove the weight (it was almost always half rattled off at this point), wrap the mount lugs with friction tape (the plastic lugs were being worn down/chaffed by the balance weight), put the weight back...
Read more
More
$10.70
- Compare At:
-
$11.77
- You Save:
-
$1.07
Genuine Ge part
By: Ge
Part Number: WB1X1130
Replacement screw for securing panels, brackets, and internal components. Needed when original hardware is stripped, missing, or damaged during repairs.
Do-It-Yourself Stories from Customers like You
Broken door hinge on a ge wall mount double oven Cheryl A. • Mckinney , TX • June 18, 2018
We replaced the broken door hinge.
Read more
More
Genuine Ge part
By: Ge
Part Number: WE12M50
Idler arm assembly mounts to the dryer frame and maintains proper belt tension on the drum. Replace if the arm is cracked, bent, or the pulley is worn.
More
$71.44
- Compare At:
-
$85.73
- You Save:
-
$14.29
Genuine Whirlpool part
By: Whirlpool
Part Number: W10846509
The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear bulkhead to the tub, ensuring vibrations are reduced through solid mounting points. Properly installed screws dampen oscillating movement.
Causes of a bad screw include damage from water exposure like corrosion or breakage from stress concentrations if the tub bangs around during imbalanced loads.
Symptoms of a bad screw include:
- Loose or detached rear bulkhead allowing side-to-side play
- Excessive noise and shaking felt through the surrounding walls
- Development of micro-cracks around screw holes over time
- Potential leak paths if holes are no longer sealed
This Whirlpool replacement screw restores a stable suspension system. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Whirlpool direct drive washer major repair drive/brake assembly clutch suspension outer tub etc Carter H. • Oak Ridge , TN • July 11, 2015
Watched several repair videos on YouTube produced by AppliancePartsPros.com for this model Whirlpool washer (videos quite well done). Purchased parts from AppliancePartsPros.com; order correctly filled and parts arrived by FedEx within two working days. Performed repairs as instructed. "Plastic welded" holes in poly outer tub using similar plastic (PP) using a cheap soldering iron - worked perfectly, saved >$150 for new tub. Washer now like brand new. Suggestion - buy the spanner wrench,...
Read more
More
$7.56
- Compare At:
-
$8.32
- You Save:
-
$0.76
Genuine Whirlpool part
By: Whirlpool
Part Number: 22002315
Pulley, spinner restores proper spinner rotation by guiding the spinner assembly and maintaining belt alignment. Replacing a worn or damaged pulley reduces noise and vibration during spin and helps improve water extraction. What it does:
- Guides and supports the washer's spinner assembly for smooth rotation and correct belt tracking.
- Common symptoms of a failing pulley: loud squealing or grinding during spin, wobbling spinner, belt slippage, or poor water extraction.
- Replaces a worn, cracked or noisy pulley to restore normal spin performance.
What's included: Includes: One pulley. Install notes:
- Disconnect power (unplug or switch off breaker) and shut off water before servicing.
- Access the spinner area per your appliance's service guide—remove panels or agitator as needed to reach the pulley.
- Inspect belt, bearings and mounting hardware; replace any worn or damaged components at the same time.
- Follow manufacturer torque and reassembly instructions.
Do-It-Yourself Stories from Customers like You
Pulley kept coming off Paul B. • Gasport , NY • October 29, 2021
New pulley
Read more
More
$106.37
- Compare At:
-
$126.58
- You Save:
-
$20.21