Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Cap2762mqo Parts

Best Seller
Washer Water Level Pressure Switch Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WP353244

Washer overfilling or not filling properly? A damaged pressure switch hose prevents accurate water level sensing. Easy 15-minute DIY fix with video.

Do-It-Yourself Stories from Customers like You My kenmore washer model 11029828801 was agitating during the fill cycle and the tub would only partially fill also at the end of the spin cycle rinse water was spraying in resoaking the clothes   Jay S. • Hammond , IN • February 07, 2017

I read the FAQ section of Appliance Pros parts web site. I found out I needed to replace the temperature control switch, WPW10248240, to correct my problem. This switch also controls the tub filling water level based on air pressure via the attached vinyl tubing. I ordered the switch and the tubing, WP353255, in case mine was no longer any good, and I also ordered the retaining clips for the control cabinet, (2) of WP8312709, because they can be damaged when accessing the controls. My new... Read more

More
$53.21

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Sound Dampening Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP63134

The Sound Dampening Ring is an OEM replacement part for Whirlpool washing machines. Located within the clutch housing, it serves to minimize noise transmission from internal components.

Causes relate to years of absorbing internal impacts fatiguing the damping material. Buildup of grime and detergent residue in its ridges may diminish noise-isolating effectiveness over time.

Symptoms of failure include:

  • Excessive humming or clanking sounds from the transmission area
  • Increased cabinet vibrations felt externally during operation
  • Improper sound insulation leads to a louder overall noise profile

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

Do-It-Yourself Stories from Customers like You Our washer quit spinning   Howard H. • Walton , KS • November 16, 2015

I did some research to diagnose the problem.After watching the videos I determined it needed a clutch kit. I didn't know the first thing about washing machines,but I ordered the parts and with the provided video,it was a piece of cake. Our washer works great now! Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer U-Type Clip Nut
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98234

U-type clip nut slides onto sheet metal panels to create threaded anchor points for screws. Replace if broken, missing, or worn during repairs.

Do-It-Yourself Stories from Customers like You Idler pulley broke.   Bob D. • Oak Lawn , IL • August 18, 2020

Replaced part. But the door was missing a screw and nut, so bought them and replaced them. Read more

More
$11.78

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Lid Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10119828

 

The Washer Lid Screw is an OEM part for Whirlpool washing machines. This 6-32 x .340 screw secures the washer lid to the hinge assembly, ensuring the lid opens and closes smoothly and stays securely in place during operation.

Causes of a bad washer lid screw can include wear and tear from frequent use, corrosion due to exposure to moisture, or damage from over-tightening or mishandling. A compromised screw can lead to issues with the lid's stability and functionality.

Symptoms of a bad washer lid screw include:

  • The washer lid feeling loose or wobbling
  • Difficulty in opening or closing the lid
  • Visible rust or corrosion on the screw
  • The lid not staying securely in place

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Whirlpool cabrio washer cracked lid (model wtw7800xw2)   Mike M. • West Hartford , CT • November 29, 2016

I just replaced the glass lid and broken plastic frame with the all metal one. Call 877 477 7278 for appliancepartspros and order the following Whirlpool parts (prices as of November 2016): 1 lid part number WP8572026 (AP6013408) for $119.81 2 hinges WP8563964 (AP6004844) for $6.17 each 4 screws WPW10119828 (AP6015313) for $1.97 each Total $140.03 plus $8.95 shipping, grand total $148.98 Note that it does not say that this lid will fit model 7800, but the lid will fit this model. The... Read more

More
$7.94

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Gear Case Oil
Genuine Whirlpool part
By: Whirlpool
Part Number: 350572

Lubricates transmission gears for smooth wash and spin cycles. Replace when degraded or after transmission repairs. Verify compatibility with your model.

Do-It-Yourself Stories from Customers like You Teeth stripped from gear in transmission   Robert G. • Wentzville , MO • June 17, 2015

The parts I purchased from Appliance Parts Pro fit perfectly and were reasonably priced. I received them the next day, which made the Wife (and me) very happy. Although Appliance Parts Pro did not have a repair video for this, I was able to find one online and the machine is washing like new again. The website is well laid out and easy to find what your looking for. Between the available parts and the videos they provide, anyone who is reasonably handy should be able to repair their machine as... Read more

More
$54.25

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Lid Hinge Bearing
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21258

The lid hinge bearing is used for the lid hinges on washers and dryers. When functioning properly, it allows the lid to open and close properly. If this is a problem with the bearing, it could make the lid difficult to move. In some cases, when the lid will not close, it means that the machine will not function correctly. Damaged lid hinge bearings should be replaced as soon as possible.The lid hinge bearings see a lot of work since they are in use whenever the lid of the washer or dryer opens and closes. They could become cracked and broken over time. Replacing the bearings is a relatively simple repair that owners can make on their own.This lid hinge bearing is for use with many models of washers and dryers from Whirlpool, KitchenAid, Roper, Estate, Inglis, Maytag, Admiral, Amana, Crosley, and Magic Chef. This is a genuine OEM replacement part that has been sourced from the manufacturer. The piece is sold individually, so if owners need to replace more than one hinge, they will need to buy multiples.

Do-It-Yourself Stories from Customers like You Whirlpool washer   David L. • Linn , MO • August 31, 2015

With the parts supplied from your company. The lady that took my order was good at her job. All the parts were correct and fit. I thank you for the service that recieved. Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Motor Shield
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3946532

Washer motor shield deflects water, lint, and debris away from the drive motor. Replace if cracked or missing to prevent motor damage. Simple install.

More
$20.49

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Cabinet Retaining Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62780

Used to lock washer cabinet to rear wall of washer.

Do-It-Yourself Stories from Customers like You Slightly imbalanced load in the washer created a a lot of noise.   Marvin F. • Williamsburg , VA • March 13, 2014

Replaced springs and the ordered clips holding the control panel to the washer outer cabinet. Clips had been elongated from earlier repair work. A DIY tutorial was a great help. Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9741232

Quantity of ONE. Size: 8-18 x 5/8 inch. (#8 screw, 18 threads per inch, 5/8 inch long)

Do-It-Yourself Stories from Customers like You Leaking around dishwasher door previous repair missing parts   Patrick R. • Peachtree City , GA • November 15, 2014

I ordered new seals from AppliancePartsPros.com. Finding the right seals was very easy, all based on model number of the appliance. While looking my unit over for other signs of wear, I noticed that a repair done by the prior homeowner to the lower wash arm was done improperly: a seal there was set protruding from the cover, the cover was missing screws, and the arm was missing the upper bushing. So I ordered a new seal, the missing screws, and both the top and bottom bushings (just to be... Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10109200

This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.

  • Fastens panels, brackets, or internal parts to the cabinet/frame
  • Helps maintain alignment to reduce vibration and rattling
  • Replaces lost, stripped, or corroded screws
  • Common symptoms: loose panels/trim, rattles, or a screw that won't tighten
What's included: One screw. Install notes:
  • Disconnect power; shut off water or gas if applicable
  • Match thread and length to the original; replace one at a time to keep alignment
  • Start threads by hand to avoid cross-threading; use the correct driver
  • Tighten snugly—do not overtighten, especially into plastic or thin sheet metal

Do-It-Yourself Stories from Customers like You Missing baffles   Anna S. • Shoreview , MN • January 31, 2016

I ordered two replacement baffles and screws, then lifted the top of the dryer to access the drum and installed the two new baffles. Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Brake Shoe
Genuine Whirlpool part
By: Whirlpool
Part Number: 285438

Washer won't stop spinning smoothly or makes loud jerking noise when stopping? The brake shoe stops the tub during spin cycles. DIY repair in 1-2 hours.

Do-It-Yourself Stories from Customers like You No spin every thing else worked made high speed ticking noise   Anthony D. • Follansbee , WV • May 12, 2015

First I looked at the many you tube vids, and there are many. appliance parts pros pretty much shows you how to deal with the parts. I changed the brake shoes and the clutch assembly which also comes with the driver cam. I also changed the metal brake operating cam. I think that brake lockup or improper brake release was the problem that broke the plastic cam driver. This was the broken plastic part making all the ticking noise. I first changed the coupling on the motor but that wasn't bad. in... Read more

More
$95.24

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Locking Nut
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3359452

This locking nut is used for many purposes on a range of machines including household appliances. This nut is often used for leg leveling for machines. It will help with vibrations from washers and dryers. If the nut is used for this purpose and goes missing or becomes damaged, it could cause the machine to vibrate more and seem louder.Nuts are made from metal and are built to last a long time. However, there can still be issues that arise. In some cases, the nuts might go missing if they become loose and the machine is moved. They could also corrode over time and need to be replaced. The replacement of the nut is typically a fast and simple repair.The nut is a genuine OEM replacement part sourced from the manufacturer. It can work with washers, dryers, and combo machines, and is compatible with models from Whirlpool, Kenmore, Maytag, and Roper. The part is sold individually. Owners may want to have several on hand.

Do-It-Yourself Stories from Customers like You Whirlpool washer was shaking and moving in spin cycle   Charles B. • Sioux Falls , SD • September 25, 2018

Replaced 2 springs and brackets. Also replace rear legs and front legs and re leveled. Works fine. Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Rear Panel Support Bracket
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8519200

Structural bracket that secures the rear panel to the washer chassis. Replace if cracked, broken, or missing to restore proper alignment and cabinet stability.

Do-It-Yourself Stories from Customers like You No spin/agitate.   Daniel S. • Landenberg , PA • November 11, 2022

In the end, with a new coupler. But I relearned old lessons the hard way. The washer is in a rental unit and the tenant complained of no spin. My first intuition was that the coupler failed again because I bought a cheaper one elsewhere a couple of years ago and not the brand name available here at AppliancePartsPros. But we’ll come back to that. Lesson #1: Verify the symptoms firsthand. I dug in right away, popped out the motor and the coupler appeared okay. When I spun it by hand, it turned... Read more

More
$12.40

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Thrust Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62658

Washer thrust ring acts as a bearing spacer between the outer tub and basket drive, controlling end-play and reducing friction. Replace when worn to restore smooth, quiet operation and prevent premature wear.

Do-It-Yourself Stories from Customers like You Washer driver block was worn out   Melissa J. • Battle Creek , MI • March 15, 2015

Purchased parts from your site and did a self repair. Excellent quality , speedy delivery and easy to install. Now our 13 year old washer works as good as new. Read more

More
$8.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3390631

10 - 16 x 1/2

Do-It-Yourself Stories from Customers like You Agitator wasnt sloshing   Paige B. • Clarksville , TN • January 30, 2015

I looked inside and saw the teeth were worn off the "dogs" so I purchased the Cam Agitator repair kit and a new bolt. Getting the old bolt out was the hardest part since it was worn and rusted. I ended up having to buy a set of socket extensions and a set of stripped bolt sockets so $45 in tools and it took me an hour to get the old bolt out but putting everything back together was a breeze. I was very proud of myself, as a woman, that I fixed this problem myself and didnt have to pay a repair... Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Motor Grommet
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62691

Rubber grommet for motor mount stud.

Do-It-Yourself Stories from Customers like You Washer did not agitate   Gary S. • Kimberling City , MO • December 26, 2016

Replaced dog ears. Read more

More
$8.95

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google