Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Met1041zas6 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W10777162

The Screw is an OEM part for Whirlpool ranges. This screw is used to secure various components within the range, ensuring that parts such as panels, control boards, or burners are firmly attached and remain stable during operation.  

Causes of a bad range screw can include regular wear and tear, over-tightening, or exposure to high heat.  

Symptoms of a bad range screw include:

  • Loose or unstable components within the range
  • Difficulty in securing parts during maintenance or repair
  • Visible damage or wear on the screw
  • Parts becoming misaligned or rattling during operation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Left door hinge would not allow door to close square to opening   Jay R. • Clearwater , FL • October 19, 2019

Replaced the hinge receiver with a new one. The old one was bent slightly inside where it could not be seen. I think someone pushed the door down to far or fell on it. 2 screws to remove it, take out storage drawer and reach up little ways to remove and replace the receiver. Replace the 2 screws. The receiver comes with 2 screws but I ordered an extra ( never used it ). The sides of the receiver were spread just a tiny bit but were enough to cause a problem. Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Oven Temperature Sensor
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7430P044-60

Oven displaying error codes or baking unevenly? The temperature sensor monitors cavity heat and signals the control. Moderate DIY repair in 30-45 minutes.

Do-It-Yourself Stories from Customers like You Oven acting erratically flashing bake indication shut down during cooking checked control panel diagnostics per service sheet in back of oven code indicated sensor open circuit detected   Jay G. • Columbia , SC • July 19, 2014

I replaced the sensor. Turn off power, be sure oven is cold Remove oven door (put in broil position, pull straight up, set door aside, carefully release tension on arms and gently park them against the door frame - do not let them smack into the steel or it will crack the ceramic coating) Remove oven rack Remove 2 screws holding sensor to back of oven cavity wall Gently pull leads forward to find connector, it is supposed to be able to be pulled out from the front. However, my connector got... Read more

More
$103.33

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer U-Type Clip Nut
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98234

U-type clip nut slides onto sheet metal panels to create threaded anchor points for screws. Replace if broken, missing, or worn during repairs.

Do-It-Yourself Stories from Customers like You Idler pulley broke.   Bob D. • Oak Lawn , IL • August 18, 2020

Replaced part. But the door was missing a screw and nut, so bought them and replaced them. Read more

More
$11.78

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Lid Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10119828

 

The Washer Lid Screw is an OEM part for Whirlpool washing machines. This 6-32 x .340 screw secures the washer lid to the hinge assembly, ensuring the lid opens and closes smoothly and stays securely in place during operation.

Causes of a bad washer lid screw can include wear and tear from frequent use, corrosion due to exposure to moisture, or damage from over-tightening or mishandling. A compromised screw can lead to issues with the lid's stability and functionality.

Symptoms of a bad washer lid screw include:

  • The washer lid feeling loose or wobbling
  • Difficulty in opening or closing the lid
  • Visible rust or corrosion on the screw
  • The lid not staying securely in place

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Whirlpool cabrio washer cracked lid (model wtw7800xw2)   Mike M. • West Hartford , CT • November 29, 2016

I just replaced the glass lid and broken plastic frame with the all metal one. Call 877 477 7278 for appliancepartspros and order the following Whirlpool parts (prices as of November 2016): 1 lid part number WP8572026 (AP6013408) for $119.81 2 hinges WP8563964 (AP6004844) for $6.17 each 4 screws WPW10119828 (AP6015313) for $1.97 each Total $140.03 plus $8.95 shipping, grand total $148.98 Note that it does not say that this lid will fit model 7800, but the lid will fit this model. The... Read more

More
$7.94

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Drain Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: 285664

Replace a cracked, leaking, or worn washer drain hose. 48 inches long with clamp included. Installs between pump and standpipe for proper drainage.

Do-It-Yourself Stories from Customers like You Drain hose too short and home depot fix leaked   Sara B. • Liberty Hill , TX • August 21, 2015

Ordered a new drain hose and extension part. The prices including shipping were more reasonable than driving back and forth to the store just to piece meal parts together. Very frustrating. I ordered the parts that were specific to our washing machine, it took maybe 5 minutes to install, and everything fit perfectly. Now we're washing again and no leaks! Read more

More
$32.64

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Heating Element
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387749

Dryer not heating or taking multiple cycles to dry clothes? The heating element generates warmth during the drying cycle. DIY-friendly repair.

Do-It-Yourself Stories from Customers like You The heating element in my electric dryer was broken   Gary R. • Lakewood , NY • October 26, 2014

Replaced it with a new element. Fairly easy to replace if you have any kind of mechanical know how. Ordered the part for a 2 day delivery and got it the next day. Read more

More
$153.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Range Infinite Switch Top Burner Control
Genuine Whirlpool part
By: Whirlpool
Part Number: W10911303

Burner won't heat or stuck on one temperature? This infinite switch controls your range surface element heat levels. DIY repair restores precise cooking.

Do-It-Yourself Stories from Customers like You Oven fan code & all knobs needed to be replaced.   Craig L. • Avon , CO • November 08, 2020

I was able to clean the Oven Temp Sensor with 99% alcohol. Then replaced All switches (after breaker was isolated). Put it all back the way I found it. Turned on breaker. Tested all functions and had no reports of Fan Code re-appearing since. Read more

More
$73.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Idler Pulley Assembly (Drive Belt Tensioner)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10547294

This idler pulley assembly keeps the drive belt properly tensioned and aligned so your appliance runs smoothly and quietly. Replacing a worn or seized idler restores reliable belt drive and helps prevent slippage, noise, and no-drive issues.

  • Maintains spring-loaded tension on the drive belt
  • Spins freely to reduce friction and belt wear
  • Helps route and align the belt between the motor and drum/basket
  • Typical symptoms of a failing idler: squealing/chirping, belt fraying or coming off, intermittent or no tumble/spin, burning rubber smell
What's included: One idler pulley assembly. Install notes:
  • Disconnect power; for gas units, also shut off the gas supply.
  • Relieve belt tension, swap the assembly, and route the belt per your unit's diagram.
  • Rotate the drum/basket by hand to check alignment.
  • Wear cut-resistant gloves and use caution around sharp edges and spring tension.

Do-It-Yourself Stories from Customers like You The tension arm for the belt on the dryer broke.   William B. • Medley , FL • April 25, 2020

Got a new arm and wheel and change the old one out. Read more

More
$27.37

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Gear Case Oil
Genuine Whirlpool part
By: Whirlpool
Part Number: 350572

Lubricates transmission gears for smooth wash and spin cycles. Replace when degraded or after transmission repairs. Verify compatibility with your model.

Do-It-Yourself Stories from Customers like You Teeth stripped from gear in transmission   Robert G. • Wentzville , MO • June 17, 2015

The parts I purchased from Appliance Parts Pro fit perfectly and were reasonably priced. I received them the next day, which made the Wife (and me) very happy. Although Appliance Parts Pro did not have a repair video for this, I was able to find one online and the machine is washing like new again. The website is well laid out and easy to find what your looking for. Between the available parts and the videos they provide, anyone who is reasonably handy should be able to repair their machine as... Read more

More
$54.25

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Lid Hinge Bearing
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21258

The lid hinge bearing is used for the lid hinges on washers and dryers. When functioning properly, it allows the lid to open and close properly. If this is a problem with the bearing, it could make the lid difficult to move. In some cases, when the lid will not close, it means that the machine will not function correctly. Damaged lid hinge bearings should be replaced as soon as possible.The lid hinge bearings see a lot of work since they are in use whenever the lid of the washer or dryer opens and closes. They could become cracked and broken over time. Replacing the bearings is a relatively simple repair that owners can make on their own.This lid hinge bearing is for use with many models of washers and dryers from Whirlpool, KitchenAid, Roper, Estate, Inglis, Maytag, Admiral, Amana, Crosley, and Magic Chef. This is a genuine OEM replacement part that has been sourced from the manufacturer. The piece is sold individually, so if owners need to replace more than one hinge, they will need to buy multiples.

Do-It-Yourself Stories from Customers like You Whirlpool washer   David L. • Linn , MO • August 31, 2015

With the parts supplied from your company. The lady that took my order was good at her job. All the parts were correct and fit. I thank you for the service that recieved. Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer
Genuine Whirlpool part
By: Whirlpool
Part Number: 285620

This small hardware washer sits under a fastener in the specified assembly to distribute load and maintain proper spacing. Replacing a worn or missing washer helps keep components tight, aligned, and operating smoothly.

  • Distributes clamping force to prevent fastener pull-through and damage
  • Maintains correct spacing/stack-up in the original assembly
  • Helps reduce loosening, vibration, and premature wear at the joint
  • Typical signs of trouble include rattling, looseness, or misalignment at the connection point
What's included: 1 washer Installation notes:
  • Disconnect power (and turn off water supply if accessing a wet area)
  • Use your model's parts diagram to locate and install the washer
  • Replace one-for-one; reinstall any spacers or clips in the same stack sequence
  • Tighten fasteners to manufacturer guidance—do not overtighten

Do-It-Yourself Stories from Customers like You Dryer drum was beginning to stall occasionally   Dana J E. • San Marcos , CA • March 17, 2015

After shopping for a new Whirlpool Thin Twin Stack, Found appliance parts pros online and decided to take it apart to see if repair was a possibility. APPro's online instructions were easy to follow, in a couple hours it was apart, and I placed the order. Reg ground took a week from NY, so the laundry piled up that week. The parts arrived on Monday morrning, by afternoon the machine was running like new! The cause was the belt tensioner pulley had frozen. Replaced it, drum wheels,snap... Read more

More
$7.43

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Nut (3/8-16)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10080190

This 3/8-16 nut secures appliance components and helps prevent loosening and vibration. Replace a worn, stripped, or missing nut to restore a tight, reliable connection and consistent operation.

  • Provides a 3/8-16 threaded fastener connection for applicable bolts or studs
  • Helps keep brackets, panels, and other parts firmly in place
  • Replaces damaged or missing hardware that can cause looseness or rattling
  • Signs of failure include rounded corners, stripped threads, corrosion, or inability to tighten securely
What's included: 1 nut Installation notes:
  • Disconnect power and, if applicable, shut off water and gas before servicing
  • Match thread size to the original part; start threading by hand to avoid cross-threading
  • Reinstall any washers/spacers in the original order; tighten securely without over-tightening
  • If the original used a locking feature or threadlocker, reinstall per your product's service information

Do-It-Yourself Stories from Customers like You The gas dryer was very noisy   Timothy L. • Edwardsburg , MI • January 21, 2024

Replaced the Drum Roller and shaft. The hardest part was finding out the nut was left handed threads Read more

More
$7.48

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Timer
Genuine Whirlpool part
By: Whirlpool
Part Number: W11409801

The Timer is an OEM part for Whirlpool dryers, designed to control the duration of various drying cycles. This part ensures your dryer operates efficiently, cycling through its programmed times for drying, cooling, and tumbling. 

Common causes of a malfunctioning dryer timer include corrosion or wear of electrical contacts, mechanical failure from stuck gears, and electrical shorts impacting circuitry.

Symptoms of a failing Timer include:

  • The dryer not starting or stopping at the correct time.
  • The dryer skipping certain parts of a cycle or not advancing through cycles at all.
  • Inconsistent drying times, leading to clothes being either too damp or overly dry.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Washer dryer combo dryer timer replacement   Johnny R. • Lutz , FL • August 14, 2026

Removed control panel and replaced timer switch control. Read more

More
$152.38

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Belt Switch Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279782

Dryer won't start but has power and timer works? This belt switch kit stops the dryer when the belt breaks. Moderate DIY repair, 45-60 minutes.

Do-It-Yourself Stories from Customers like You Broken belt switch   Jack F. • Hermosa Beach , CA • July 08, 2016

Every time I tried to start our dryer, the "Sensing Light" came on, I heard a little "click," and the dryer would not start. According to the very helpful Appliance Parts Pros. videos, I was able to dismantle, diagnose a few components, and discover the broken part. In this case, it was a Broken Belt Switch. I ordered the part, we went on vacation for a week, and when we returned home the part was at our residence. The next day, I installed the part and all is good now. I am nearly 70 years... Read more

More
$54.25

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Range Hinge Receiver
Genuine Whirlpool part
By: Whirlpool
Part Number: W10647259

Mounts to the range frame to anchor the door hinge arm. Replace if cracked, bent, or worn to restore proper door alignment and smooth operation.

Do-It-Yourself Stories from Customers like You Oven door will not shut completely   Mitch S. • Mount Laurel , NJ • January 21, 2019

I knew for sure that the hinge with the large spring was damaged, but elected to replace both hinges and receivers. Replacing the parts was fairly easy and would have taken me less then an hour. This model has thin metal covers over the hinge assemblies. I found that squeezing in the sides of the covers help to hold them in place on the hinge while reassembling the door. My only difficulty was putting the door back on the oven. It took a little maneuvering but I managed to get it. Now the door... Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Heater Box
Genuine Whirlpool part
By: Whirlpool
Part Number: W10802681

Dryer not heating? A warped or damaged heater box lets heat escape, reducing efficiency. This housing secures the element and protects components.

Do-It-Yourself Stories from Customers like You Heater element bad   Paul R. • Lewisville , TX • January 09, 2017

Well i thought i had to replace the whole metal casing, turns out the element is separate and that was all i would have needed. but i cot my original casing apart only to find out that was a mistake. anyway i got it all repaired now and its working like new. Read more

More
$87.95

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google