Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Plastic end cap for refrigerator freezer door handles. Replaces cracked, broken, or missing caps. Snaps onto handle ends to restore appearance.
The parts ordered were the correct ones as shown on the diagram provided on the website. The ship was quick (although expensive) and about 20 minutes after arrival the new parts were installed and the wife is happy again. 1. remove the top caps covering the brackets. (carefully) pull up on the front of the cover until it clicks and then slide toward the front and they come out. 2. you will need a phillips head screwdriver to remove the white and black brackets. After removing the screws the... Read more
Flipper assembly that installs vertically on the French door liner to seal the center gap. Replace if cracked, broken, or no longer closing properly.
Looked at new part and realized there were only 2 screws that held the flap onto the door. Removed 2 caps off of screws with small knife and saved them. Removed 2 screws and the flap fell off into my hands. Disconnected wire harness. Connected wire harness for new flap and carefully pushed harness back into recess in door. Put screws back with caps. Closed the door to test and another wonderful job completed by homeowner! Read more
Replaces cracked or clogged drain cap assembly in refrigerator compartment. Installs behind rear wall to prevent water buildup under crisper drawer.
Found one of the drain valves was clogged causing condensation to overflow on the floor behind the refrigerator. Order the parts on Monday morning and they arrived tuesday afternoon. Replace both of the valves in 15 minutes. Easy repair and save a bundle over a service call. Read more
Ice maker not producing ice or water flow stopped? The fill tube heater prevents freezing in the water line. Moderate DIY repair with video guide.
Turn off the water to the ice maker. Unload the freezer and remove the freezer door so you have room to work. Remove the ice maker by removing 2 screws in the front then pull the unit toward the front and unplug the wiring connection. The pipe will now be exposed. Remove the flexible piece from the front of the pipe that directs the water flow to the ice cube tray. Remove the wire tie on the front of the pipe and peel off the insulation surrounding the pipe. The heater will now be exposed.... Read more
Seals your freezer door to maintain temperature and prevent air leaks. Replace if torn, worn, or moldy. Confirm fit with your model number.
I looked up my fridge on AppliancePartsPros.com and easily identified the parts I needed (2 door gaskets and 1 freezer gasket). Ordered them on Friday to be sent standard mail and all seals arrived on Saturday. I was thrilled and within 15 minutes my seals were replaced and working perfectly. Thanks so much having a user friendly website and speedy service. I will definitely use you again and recommend you highly. Read more
The Evaporator Defrost Heater Bracket for Refrigerator is essential for maintaining your Samsung refrigerator's optimal performance. This genuine OEM part securely holds the evaporator defrost heater in place, ensuring effective defrost cycles that prevent frost buildup. By maintaining proper heater alignment, it helps your refrigerator operate efficiently, reducing energy consumption and extending the appliance's lifespan. Specifically designed for Samsung refrigerator models, this bracket guarantees a perfect fit and seamless integration with your existing system. Installing the Evaporator Defrost Heater Bracket restores the defrost mechanism's reliability, ensuring your fridge stays cool and your food remains fresh. Made from durable materials, this genuine OEM part withstands regular use and provides long-lasting support. Whether you're replacing a worn or damaged bracket, this component is the ideal solution to keep your refrigerator functioning smoothly. Trust in the Evaporator Defrost Heater Bracket for Refrigerator to deliver consistent performance and enhance your appliance's defrosting capabilities.
Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more
Fix warm fridge temps and ice buildup with this evaporator fan motor. Common when fan makes grinding noise or stops running. DIY repair in 2-3 hours.
I took all the items out of the refrigerator. Removed the screws that hold the cover over the evaporator motor. Than for three hours used a hair drier to remove ice. The panel was frozen on if you pull on it it will break. Soaked up all the water removed the panel and took the fan blade off. That was difficult because it looks like a regular screw head however, you need to push in that which will cause it to release the blades and than push it onto the new motor. Than replace the panel put the... Read more
If your refrigerator won't cool properly or freezes food, the temperature sensor may be faulty. Moderately easy DIY repair with our video guide.
Customers temp sensor and defrost heater went out in his fridge and we replaced both parts bought thru yall and it works great. another satisfied customer. were completely satisfied with your products. we only use yall :) Read more
Refrigerator compressor won't start after power surge? This overload protector prevents electrical damage to your compressor. DIY repair in 30 minutes.
Took a bit to diagnose. First tried cleaning coils but the problem still persisted. Next took of the back panel and put the system into diag mode. (Press energy save button and fridge button for eight seconds system ding once a second and inverter board red LED will blink a code or be on solid if no issue. See back of the refrigerator for a sticker with what the number of blinks means. My unit one blinking 1 time. So I measured the resistance of the compressor between windings (8.9 ohms between... Read more
Refrigerator not cooling or making noise? A failed fan motor stops airflow, causing warm temps and ice buildup. Moderate DIY repair with multimeter testing.
Ordered the two motors plus ordered the fan blades since I was afraid one might break during replacement. Changed out without breaking Freezer and both ice makers now working fine Read more
This Freezer Door Handle is an OEM replacement part for Samsung refrigerators. The Freezer Door Handle is a component that allows easy access and secure closure of your freezer door.
Common causes of a bad handle include wear and tear, accidental damage, or loosening of the mounting screws. When the handle is compromised, it may become difficult to open or close the freezer door smoothly, leading to potential temperature fluctuations and decreased energy efficiency.
Some symptoms that indicate a defective Freezer Door Handle:
This genuine Samsung OEM replacement part is also compatible with some Kenmore models.
Using the website, I was able to locate the part and order it Read more
Seals your refrigerator door to keep cold air in and prevent energy waste. Replace if torn, cracked, or loose. Easy DIY install—confirm fit by model.
Took off the old ones, put on the new ones. Read more
The Refrigerator Temperature Sensor Bracket is an essential component for maintaining optimal performance in your Samsung refrigerator. This genuine OEM part ensures precise temperature monitoring, which is crucial for keeping your food fresh and your appliance running efficiently. Designed specifically for Samsung refrigerators, the sensor bracket provides a secure and stable mounting point for the temperature sensor, enhancing its accuracy and reliability. By replacing a worn or damaged sensor bracket with this high-quality genuine OEM part, you can prevent temperature fluctuations and avoid potential cooling issues. Installation is straightforward, allowing you to restore your refrigerator's functionality quickly and easily. Investing in the Refrigerator Temperature Sensor Bracket means trusting in a durable and compatible solution that supports the longevity and efficiency of your Samsung appliance. Experience the peace of mind that comes with using a part designed to meet the exact specifications of your refrigerator, ensuring consistent performance and a better overall cooling experience.
Samsung refrrigerator. it started when the setting was on cubes but was putting out crushed ice. then months later the water refill was running down into the ice bucket causing a massive block of ice in the bucket. look closely at the first two or three cubes in the ice tray after they unload. mine were not dumping and staying in the tray. when the water refill kicked on it would overfill the tray (because of the leftover cubes remaining in the tray) and would run down into the ice bucket... Read more
Fix ice or water that won't stop dispensing with this dispenser control switch. Resolves stuck dispenser issues. DIY repair in under 30 minutes.
First, I modified old butter knife by bending a 90° angle about 3/4" from the tip. I slid the bent in up under the bottom of the switch cover and worked it to one side. I then rotated the knife downward using the bent end to pry the cover off. The switch is held by plastic arms on each side. The bottom right arm has a locating pin that fits into the switch. Unplugged the switch and re-installed. Read more
Replacement rear caster wheel for refrigerators. Restores mobility when original wheel is broken, cracked, or damaged. Mounts to bottom rear of unit.
I have a large Samsung 4 door refrigerator. One of the rear wheels broke. To replace it, you need the wheel and the shaft. To lift the refrigerator for the repair, I had my wife stand in front of it with her foot on a board that was wedged against the front wheels. I then pushed the refrigerator up from behind and slid a 3/4" piece of plywood underneath the bottom with my foot. This gives you enough space to do the repair. After removing the back cover, it's best just to knock out the broken... Read more
The Refrigerator Fan Assembly is an essential component for maintaining optimal performance in your Samsung refrigerator. This genuine OEM part ensures reliable airflow throughout the appliance, helping to maintain consistent temperatures and keep your food fresh longer. Designed specifically for Samsung refrigerators, the fan assembly guarantees a perfect fit and seamless integration with your existing system. Its durable construction withstands daily use, providing long-lasting functionality and peace of mind. Installing this fan assembly is straightforward, allowing you to quickly restore your refrigeratorGÇÖs efficiency without the need for professional assistance. By replacing a faulty or damaged fan assembly with this genuine OEM part, you can prevent issues such as uneven cooling or excessive noise, ensuring your refrigerator operates smoothly and effectively. Enhance the longevity and performance of your Samsung refrigerator with the Refrigerator Fan Assembly , a customer-focused solution for dependable refrigeration.
I bought new parts, motor and fan. Replace the old one. Took me no more than 15 minutes to fix it. Read more