Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Front caster wheel for refrigerators. Installs at the base to allow smooth rolling and repositioning. Replace if wheel is cracked, broken, or won't roll.
Used the video with the parts and replaced the wheels. The only thing we did wrong was using the front wheel axle instead of the back wheel axle on the back wheels. I will just order two more front wheel axles which are longer than the back axle. Thank you for the video, it made this repair easier. Read more
Fix a refrigerator that won't dispense water or ice with this dispenser switch. Requires removing the display cover and disconnecting housing connectors.
I replaced the control board and the microswitch. Read more
The Pantry Drawer Cover is an OEM part for Samsung refrigerators. It is designed to fit and protect the pantry drawer, keeping your food items organized and fresh. It helps to maintain freshness and prevent spoilage of perishable goods by providing insulation and temperature regulation within the drawer.
Causes of a bad pantry drawer cover can include wear and tear over time, accidental damage, or improper handling. A damaged or faulty cover may result in inadequate insulation, leading to temperature fluctuations and potential food spoilage.
Symptoms of a bad Pantry Drawer Cover include:
Replace your damaged or worn-out Pantry Drawer Cover with this genuine part. This OEM Samsung part can also be used on Kenmore/Sears appliances.
I used Live Chat with ApplianceParts Pros and I had a great gal who would not quit till we found the proper part for my refrigerator. I applaud your customer service especially Cindy H.! The part arrived quickly and I had already read from previous people on your website who had fixed same part what their experience was and it helped when I had to install mine. One mentioned that it was flexible so I knew what I needed to do. Flexible is the KEY word on this particular part. I inserted one... Read more
Secures the glass panel over your refrigerator's crisper drawers. Replace if cracked, broken, or missing to restore proper shelf support and appearance.
Order a new fixer Read more
Replacement axle pin for refrigerator front caster wheels. Installs through wheel assembly to secure rolling casters. Needed when bent, broken, or worn.
Samsung does not make it easy to replace the casters. The shafts holding the casters are crimped at the ends and had to be cut off with little room for any tools. I had to jack up the fridge and I used a hacksaw blade with a handle to cut through the wheel shafts. I didn't want to use a reciprocating saw. I couldn't find a way to crimp the new shafts so I drilled small holes at the ends and used cotter pins to retain the shafts in place.The rear caster had no room to slide the new one in... Read more
Spring component that provides tension for the freezer door handle mechanism. Replace if spring is broken, missing, or no longer holding proper tension.
I looked at the blow up drawing to figure out what parts I might need. I then watched a you tube video to see how to take the handle off. I kind of figured out on my own how to remove the ruined cap handle. It took me a few minutes to figure it out and more time to remove both the handle and the broken part. Turns out I did not need the spring nor the shaft cap handle. Very proud of myself. Saved a huge amount of money. Only problem was that I could only put in one screw as the previous... Read more
Replaces cracked, frozen, or leaking water reservoir in bottom-mount refrigerators. Installs behind crisper drawers. Includes dual tanks and connector.
Ordered tank and heater, installed, so far so good. Thanks for the speedy order Roman Read more
The Refrigerator Door Mullion is a high-quality component designed to enhance the functionality and appearance of your Samsung refrigerator. This genuine OEM part ensures a precise fit and seamless integration with your appliance, maintaining the structural integrity of the refrigerator door. Crafted from durable materials, the mullion provides essential support for door components, helping to prevent leaks and maintain consistent cooling performance. Installing the Refrigerator Door Mullion is straightforward, making it an ideal choice for DIY repairs. By replacing a damaged or worn mullion with this genuine OEM part, you can restore your refrigeratorGÇÖs performance and extend its lifespan. Compatible with a wide range of Samsung refrigerator models, the DA61-03234A offers reliable performance and peace of mind. Choose the Refrigerator Door Mullion to ensure your Samsung refrigerator continues to operate smoothly and efficiently, providing you with a dependable cooling solution for years to come.
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more
Fix water pooling under crisper drawers. This evaporator shield with drain pan stops leaks caused by corrosion. Moderate DIY repair with video guide.
Repair required removing all of the interior drawers & shelves and the interior back panel. There you will find the defrost heater. Behind the defrost heater is a metal plate as well as one on the back of the front interior cover. Both were corroded and in need of replacement. I ordered Samsung part #’s AP5577767, plate drain & AP5587916, evaporator plate and replaced both. Read more
Replaces cracked, broken, or scratched pantry drawer cover on your refrigerator. Includes clear plastic viewing window and white frame. Clips into place.
Replaced original parts- Only skill needed was finding plastic push tabs. No tools required. Most of time was used for removing food from refrigerator before looking for tabs. Read more
Center cap covers the middle hinge on French door refrigerator mullions. Replaces broken, cracked, or missing caps for a clean finished look.
Replacement rail assembly for refrigerator vegetable drawers. Installs on the side wall to support drawer gliding. Needed when original is cracked or broken.
Removed the bottom shelf by releasing the 2 clips near the water filter, then lifted the front of the shelf and slid it out. Removed 2 screws from the broken Vegetable Rail and replaced it with the new one. Slid the shelf back into place and locked it down into the clips. Done. Took longer to remove everything from the shelf than it did to fix it. Less than 5 minute repair. Read more
Fix frozen water tanks and no water from door dispenser. This heater prevents ice buildup in storage tanks. DIY-friendly repair with video guide.
Fix fluctuating temperatures or food freezing in your refrigerator with a new pantry temperature sensor. Common fix for uneven cooling issues.
Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more
Replacement vegetable drawer rail assembly for bottom-mount refrigerators. Installs in the crisper compartment to support produce drawers. Needed when broken or snapped.
I removed the broken rail saving the 2 Phillips head screws for installation of new drawer rail. Removal of the shelf above the drawers was required and was accomplished by pushing a button on the front of the shelf support. The installation was a snap and took about 10 minutes after removal of food items. The part was the correct one as verified by the model number on the inside of the refrigerator door. Thanks AppliancePartsPros.com! Read more
The Refrigerator Screw-Tapping is an essential component for maintaining your Samsung refrigerator's functionality. This genuine OEM part ensures precise threading, allowing screws to be securely fastened without damaging the surrounding materials. Designed specifically for Samsung refrigerators, it guarantees a perfect fit and reliable performance. Whether you are replacing a damaged screw-tapping or performing a repair, this Refrigerator Screw-Tapping simplifies the process, saving you time and effort. Its high-quality construction provides durability and long-lasting support for your appliance. By choosing the Refrigerator Screw-Tapping , you ensure your refrigerator remains sturdy and functional, enhancing its overall lifespan. This genuine OEM part is easy to install and seamlessly integrates with your existing setup, making it an ideal choice for DIY repairs. Trust in the quality and compatibility of this Samsung part to keep your refrigerator operating smoothly and efficiently.
The start button had been tricky to use. You had to push it in just a certain way to get the dryer to start. Eventually it was non-responsive. All other controls worked and there was no error code displayed. The repair was to replace the whole control board which cost around $100. Heavy sigh.. Be sure to keep track of all your screws. BTW it was not the thermal fuse. All the online videos say this is the first thing to look for when the dryer will not start. Be sure to check with the person... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.