We use cookies and similar tools for site analytics and advertising. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix washer leaks from worn filter gaskets or drainage issues. This pump filter assembly traps lint and debris. Simple DIY replacement in under 30 minutes.
Took out the original and put in the replacement. Read more
Fix water leaks behind the detergent drawer with this washer upper nozzle connector. Located under the top panel. Easy 5-minute DIY repair with basic tools.
When I opened the rear cover and check the temperature sensor, I noticed the wire connection was damp. I dried it up with a hair dryer and it worked again for a few days. Then the problem came back. When I gone back to inspect the second time, i noticed a lot of water on the floor. I knew there was a leak. I followed the disassemble samsung washer video from "Repair clinic.com" to open the top cover, then i realized the assembly hose was busted. I ordered the parts from this site and... Read more
Fix ND error codes and drainage issues with this washer check valve. Prevents backward water flow in drain pump. DIY-friendly repair with video guide.
Washer said error no drain. Cleaned the filter and still no drain. So the next step was to check the hose for any debris and when I went to pull the hose off it broke, at the same time I found the check valve flap broke in the drain pump and it was blocking the hose. So I replaced the check valve on the drain pump and replaced the hose. Read more
Replaces a broken, corroded, or cracked drum spider assembly. This structural support connects the drum to the shaft in front-load washers.
I noticed my 5-year-old Samsung, front-loading washing machine started to sound like my kids were using it as a drum kit. I immediately checked it out and the stainless drum was wobbling so badly that I just took it for an unbalanced load of clothes. My gut was telling me that something was wrong because I had not remembered the machine being so loud before. I removed the clothes from the washer and I ran it empty to confirm my suspicions: the wobble was still there. I would say it had a 2"-3"... Read more
Size: 5 foot long. Rubber fill hose used on most automatic washing machines. Two hoses used per machine.
Replaced flow meter and control valve Read more
The Washer Dispenser Drawer Housing Cover Assembly is designed to seamlessly replace the housing cover of your washer's dispenser drawer. This genuine OEM part ensures a perfect fit and reliable performance, maintaining the functionality of your Samsung washer. Crafted from durable materials, the assembly protects the internal components of the dispenser drawer, preventing leaks and ensuring smooth operation. Installing this cover is straightforward, allowing you to restore your washer quickly and efficiently without the need for professional assistance. The Washer Dispenser Drawer Housing Cover Assembly not only enhances the appearance of your appliance but also extends its lifespan by safeguarding critical parts from wear and tear. Compatible with a variety of Samsung washer models, this genuine OEM part guarantees compatibility and durability. By choosing this high-quality replacement, you ensure your washer continues to operate effectively, providing you with the dependable performance you expect from your appliance. Enhance your washerGÇÖs functionality and maintain its pristine condition with this essential dispenser drawer housing cover assembly.
Ordered new dispenser assembly and replaced it. Fixed the problem. Read more
Replace your washer door boot seal to stop leaks and prevent mildew. This rubber gasket creates a watertight seal between drum and door. Confirm fit.
I took apart the washer to find both of the weight balancers had broken in 2 and were banging around. They had also caused the boot seal to rip. I removed the broken weight balancers and replaced them along with a new boot seal. There was one small spot with the seal wasn't fully attached to the outer drum so I had to take it back apart to fix that minor error on my part. Otherwise, it was a fairly easy fix. Read more
Replace a broken or worn shock absorber that no longer dampens drum movement. Installs between the drum and base to reduce vibration and noise.
Machine was a front load washer, after doing some research found that problem is usually caused by pressure sensor or the spider arm which attaches motor to tub. Read more
Fix leaking during rinse or spin cycles with this washer check valve ball. Prevents water siphoning and maintains proper water levels. Easy DIY repair.
Replacing the upper nozzle connector did the trick. I could not see damage in the older upper nozzle, it is possible that I could have fixed this just by tightening the parts - but i am happy I purchased both the upper nozzle and check valve ball, it feels good to have installed brand new parts in the washer. Read more
The washer motor rotor assembly is the outer rotating component of a direct-drive washer motor that works with the stator to generate the electromagnetic force that spins the wash basket. It is a core part of the motor system that drives both the wash and spin cycles. Replace this part if your washer won't spin or agitate, makes a loud grinding or humming noise during a cycle, or if the machine shakes excessively during operation.
Actually, I am returning your parts. THERE IS NOTHING WRONG WITH THEM! My wife actually found out that we had a warranty on our washer that we didn't know about. But, I can comment that I did chat with your customer service and you guys were very helpful. Read more
Secures the washer drum during transport or moving. Prevents damage by immobilizing the tub. Replace missing or lost bolts before relocating your washer.
We are moving soon. In checking, I found that a front loading washing machine tub must be stabilized using shipping bolts. I found the correct items on line at AppliancePartsPros.com. "Chris" of your staff was very helpful. He informed me that my washer required only 3 shipping bolt assemblies, instead of the four I expected to buy. The bolts were delivered two days after my order. Read more
Fix washer leaks caused by a failed nozzle connector. This water distribution part secures the connection in your washer's system. DIY repair.
After discovering the cause of the leak was horrific engineering on Samsung's part. I ordered the nozzle connector (which was the failed part) and the check valve ball. Repairs were done in short order, and the machine was up and running again. So with the cost of the parts (crazy amounts for shipping), over $300 for a new floor (as the other was totally ruined by the flood of water from the machine) and three days of my time to reconstruct the laundry room, I'd say all went well. Read more
Fix a washer stuck mid-cycle or showing overfill errors with a new water level pressure switch. This part detects water levels to control fill cycles.
The Refrigerator Screw-Tapping is an essential component for maintaining your Samsung refrigerator's functionality. This genuine OEM part ensures precise threading, allowing screws to be securely fastened without damaging the surrounding materials. Designed specifically for Samsung refrigerators, it guarantees a perfect fit and reliable performance. Whether you are replacing a damaged screw-tapping or performing a repair, this Refrigerator Screw-Tapping simplifies the process, saving you time and effort. Its high-quality construction provides durability and long-lasting support for your appliance. By choosing the Refrigerator Screw-Tapping , you ensure your refrigerator remains sturdy and functional, enhancing its overall lifespan. This genuine OEM part is easy to install and seamlessly integrates with your existing setup, making it an ideal choice for DIY repairs. Trust in the quality and compatibility of this Samsung part to keep your refrigerator operating smoothly and efficiently.
The start button had been tricky to use. You had to push it in just a certain way to get the dryer to start. Eventually it was non-responsive. All other controls worked and there was no error code displayed. The repair was to replace the whole control board which cost around $100. Heavy sigh.. Be sure to keep track of all your screws. BTW it was not the thermal fuse. All the online videos say this is the first thing to look for when the dryer will not start. Be sure to check with the person... Read more
Replacement hex screw for dryers. Fastens internal components securely in place. Order when original screws are stripped, missing, or lost during repair.
The Washer Liquid Soap Dispenser Tray is an essential component for maintaining the efficiency of your Samsung washer. This genuine OEM part is specifically designed to hold and dispense liquid detergent accurately, ensuring that each laundry cycle receives the right amount of soap for optimal cleaning performance. Crafted with durability in mind, the dispenser tray withstands regular use and resists cracking or leaking, providing a long-lasting solution for your appliance. Installing the Washer Liquid Soap Dispenser Tray is straightforward, making it an ideal choice for DIY repairs. Its precise fit guarantees seamless integration with your Samsung washer, restoring the functionality of the liquid soap dispensing system without any complications. By replacing a damaged or malfunctioning tray with this genuine OEM part, you enhance the overall performance of your washer and extend its lifespan. Compatible with a variety of Samsung washer models, this liquid soap tray offers reliable and consistent detergent delivery, helping you achieve cleaner, fresher laundry with every wash. Choose the Washer Liquid Soap Dispenser Tray for a dependable and efficient solution to keep your washer operating smoothly.
Replaced with new Detergent cup and fill cap. Cup symphony perfectly. Simple fix for frustrating problem. Read more