Your privacy choices: We and our partners use cookies for analytics and ads. Decline all turns them off.
Privacy Policy · Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix excessive vibration and loud spinning noise in your washer. Balance ring assembly stabilizes the drum during spin cycles. Advanced DIY repair.
With all the bouncing around the shocks appeared to be done in but that was not the issue. The key was the balance ring. It had leaked all the fluid out causing all the beads to clump. This caused the drum to wobble wildly and not spin at speed. Getting to the ring to replace it is not a trivial task and took me several hours. Would have been much easier with help as the drum is quite heavy. The on-line video's are very handy and should be watched before attempting this job to save you a... Read more
Washer won't start or shows door lock error? This door lock switch keeps the door secured during wash cycles. DIY repair in 15-20 minutes with video.
First I took off the spring loaded wire ring holding down the seal to the door with needle nose pliers. Pulled back the seal. Removed the 3 screws holding the part on the front of the washing machine. Slid the piece out. Took the protector guard off the off piece and unplug the wires. Put the wires into new part. Put the protector on the new part. Slid the part back into place. Screwed it back in. Put the seal back on. Put the wire spring loaded ring back around the seal. Total time 15 minutes... Read more
Fix tE error codes with a new water temperature thermistor. This sensor monitors wash water temp. DIY-friendly repair takes under 10 minutes.
I first check the schematics to find the heat sensor. On my model it's c on the control panel. I checked the continuity on the orange and white wires. It showed some continuity but not much. I then went to the heater element and found the orange and white wires going to the thermistor. Turns out the heater element and thermistor need repalced. Read more
Fix washer leaks from worn filter gaskets or drainage issues. This pump filter assembly traps lint and debris. Simple DIY replacement in under 30 minutes.
Took out the original and put in the replacement. Read more
Fix loud noises, leaks, or wobbling during spin. This washer spider arm assembly replaces cracked or corroded parts. Moderate DIY difficulty, 2-3 hours.
Google is your friend. Appliancepartspros is your friend too!! I used the diagnostics to see why my 6 year old Samsung front loader makes a strange noise followed by a bad smell after it attempts the spin cycle. I used the manual that's taped to the back of the unit to put it in service mode, this helped me discover 2 things; My stay-at-home wife is not lying, she does a ton of laundry (over 4000 washes since we got the washer) AND it gets almost up to 700 rpms in the spin cycle and then... Read more
Fix water leaks behind the detergent drawer with this washer upper nozzle connector. Located under the top panel. Easy 5-minute DIY repair with basic tools.
When I opened the rear cover and check the temperature sensor, I noticed the wire connection was damp. I dried it up with a hair dryer and it worked again for a few days. Then the problem came back. When I gone back to inspect the second time, i noticed a lot of water on the floor. I knew there was a leak. I followed the disassemble samsung washer video from "Repair clinic.com" to open the top cover, then i realized the assembly hose was busted. I ordered the parts from this site and... Read more
The Washer Door Lock Bezel Cover-Switch Assembly is an essential component for maintaining the functionality and security of your Samsung washer. This genuine OEM part ensures a perfect fit and reliable performance, matching the original design of your appliance. The assembly combines both the bezel cover and the switch, providing a seamless replacement that restores the door locking mechanism to its optimal state. By choosing this Washer Door Lock Bezel Cover-Switch Assembly, you benefit from enhanced durability and precise operation, preventing issues such as door leaks or malfunctioning locks. Installation is straightforward, allowing you to easily replace a damaged or worn-out part without the need for professional assistance. Compatible with a wide range of Samsung washer models, this genuine OEM part guarantees compatibility and longevity. Investing in this high-quality assembly helps maintain your washerGÇÖs efficiency and extends its lifespan, ensuring that your appliance continues to deliver excellent washing performance. Trust in this reliable component to keep your washer running smoothly and securely.
Ordered part by looking at parts diagram and followed You tube instructions. Easy and quick! Read more
Washer won't start or door won't open? A faulty door lock assembly is the likely cause. This repair takes about 15 minutes with basic tools.
Ordered part took seal off to gain access..couple of screws and connectors..bk in business Read more
This is a small check valve that connects to the drain pump assembly on a washing machine. It prevents water from flowing back into the tub after it has been pumped out during the drain cycle. Replace this valve if you notice water draining back into the drum after a wash cycle completes, or if you find standing water remaining in the tub.
REPLACED BACKFLOW CHECK VALVE DIAPRHAM & PUMP Read more
Size: 5 foot long. Rubber fill hose used on most automatic washing machines. Two hoses used per machine.
Replaced flow meter and control valve Read more
Drains water from your washer to the standpipe. Replace if cracked, leaking, or clogged. Approximately 95 inches long. Confirm fit with your model.
Fix leaking during rinse or spin cycles with this washer check valve ball. Prevents water siphoning and maintains proper water levels. Easy DIY repair.
Replacing the upper nozzle connector did the trick. I could not see damage in the older upper nozzle, it is possible that I could have fixed this just by tightening the parts - but i am happy I purchased both the upper nozzle and check valve ball, it feels good to have installed brand new parts in the washer. Read more
The washer motor rotor assembly is the outer rotating component of a direct-drive washer motor that works with the stator to generate the electromagnetic force that spins the wash basket. It is a core part of the motor system that drives both the wash and spin cycles. Replace this part if your washer won't spin or agitate, makes a loud grinding or humming noise during a cycle, or if the machine shakes excessively during operation.
Actually, I am returning your parts. THERE IS NOTHING WRONG WITH THEM! My wife actually found out that we had a warranty on our washer that we didn't know about. But, I can comment that I did chat with your customer service and you guys were very helpful. Read more
Secures the washer drum during transport or moving. Prevents damage by immobilizing the tub. Replace missing or lost bolts before relocating your washer.
We are moving soon. In checking, I found that a front loading washing machine tub must be stabilized using shipping bolts. I found the correct items on line at AppliancePartsPros.com. "Chris" of your staff was very helpful. He informed me that my washer required only 3 shipping bolt assemblies, instead of the four I expected to buy. The bolts were delivered two days after my order. Read more
Fix washer leaks caused by a failed nozzle connector. This water distribution part secures the connection in your washer's system. DIY repair.
After discovering the cause of the leak was horrific engineering on Samsung's part. I ordered the nozzle connector (which was the failed part) and the check valve ball. Repairs were done in short order, and the machine was up and running again. So with the cost of the parts (crazy amounts for shipping), over $300 for a new floor (as the other was totally ruined by the flood of water from the machine) and three days of my time to reconstruct the laundry room, I'd say all went well. Read more
Fix a washer stuck mid-cycle or showing overfill errors with a new water level pressure switch. This part detects water levels to control fill cycles.
Machine was a front load washer, after doing some research found that problem is usually caused by pressure sensor or the spider arm which attaches motor to tub. Read more
Opt-Out Request Honored
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.