Yard Machine Small Engine Ignition Coil Parts

One of the heating elements of the stove was burnt. After removal of two screws under the ceramic glass, I replaced the 2500 w heating element (8 inch size). Read more

I ordered a replacement burner from AppliancePartsPros.com and replaced it using a u-tube video to find out how to do it. I took pictures of the wiring before I took it apart and then removed the burner element from the glass tom, but I left all the wires attached. I screwed the new element to the glass top and then one by one I unhooked each wire from the broken element and then hooked them each back onto the corresponding place on the new element. I used the digital pictures I took of the... Read more

Turned off the oven at the breaker panel and then ordered the part from AppliancePartsPros.com and received it by FedEx next day. Great price, great delivery. The installation was a snap and it is back in operation now. Thanks ApplicancePartsPro.com! Read more

• Little to no heat when baking

It took 10 minutes and a screwdriver, remember to turn off power to the oven at the fuse box. By the way, I ordered the part at 1:30pm and received it at 12:30pm the next day using normal shipping, not bad. Read more

I took the model number of the oven and typed that in followed by replacement backing element.there was a photo of the element that matched the original. They provided an online tutorial as to how to install it. It was very easy because the electrical contacts at the ends of the new baking element slid right into the electrical contacts inside the oven cavity. The only thing that you had to be careful about was loosing the electrical contacts deep inside the oven. But I didn't see it as much of... Read more

Replaced the defrost heater Read more

First, watched a how to you tube video. Then, proceeded to repair my stove. Read more

Replaced valve had some trouble removing the fitting from the valve as the new fitting was slightly too large and had to be replaced with the fitting from the old valve. Used a large crescent wrench to grip the valve at the base and I was able to apply enough force to remove both fittings transferring old fitting to new valve. The instructions were detailed and excellent. The dryer is up and running fine. Read more

The cooling coils were iced-up. The ice was blocking air flow to the refrigerator. This resulted in the freezer working fine while the refrigerator was warm. Called AppliancePartsPros and talked to Sally. Sally was a big help in troubleshooting the problem. I ordered and replaced the cooling coil heater. If you attempt to do this repair yourself, BE CAREFUL, the cooling coil fins are sharp. Read more

• Little to no heat when baking

The delivery of the element was superfast, less than 24 hrs. Unplug the Stove from the receptical! Took a phippips screwdriver and took out the 2 screws holding it, and tilted it upwards a bit and pulled the element out about 3 inches an unhooked the wires. Hooked the wires up to the new element and pushed it back into the holes and put the 2 screws back in and turned the stove on and that was all there was to that. Read more

• Oven not heating evenly
• temperature not accurate

Removed 4 screws from back panel and removed back panel. Removed 3 screws and 3 wires from heater element and removed element. Reversed procedure with new element and seal. You will need the seal! Old one crumbled apart. All took less than 10 minutes. Read more

Went to YouTube for pictorial on the repair. Found it to be an easy replacement. Made a wiring chart, followed the reverse order of wiring. Installed part checked that part floated on its spring mounts and did not touch anything. Checked my wiring a second time agents my chart-making shore all spade connections were tight. lowered and secured top turned power back on and tested part.. Part functions correctly. Read more

• Frost buildup

A real oddesy with a Samsung Refrigerator. Samsung customer servicen is a joke, but thanks to Appliance Parts Pros, I have been able to fix the various problems I have had. It is three years old, but began having serious problems about a year ago. The display was out, and the food temp in the refrigerator side varied from 30 degrees in the crispers to 56 degrees on the top shelf. None of the independent repairman I found had the diagnostic tools for Samsung, and the nearest authorized... Read more

I broke two of the elements in my GE Profile cooktop because I failed miserably at removing the glass top. It pays to do your research, kiddies. All it takes is a Number 10 Torx bit to remove 12 screws holding the glass to the body of the appliance, and it lifts straight up. I was replacing the glass because it broke during my home's construction. Anyway, you need a 1/4" nut driver to remove the mounting tabs on the bottom of the old element and transfer them to the new one. The whole swap out... Read more

I surfed the Web on " How to repair glass top stove burner that wouldn't heat". I found out how and what to check for a problem with the element.I found what I needed to know and how to trouble shoot.This was easier to repair than I thought it would be. Read more

It's was easy to replace. Unplugged the oven from the wall, unscrew the two screws that hold the element to the back of the oven and pulled it away from the oven. Then just pull off the two wires at the end of the bake element. Install the new one in the revers order, easy. Read more