Kenmore Refrigerator 596.55669500 (59655669500, 596 55669500) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: D7824706Q
The Replacement Icemaker is an OEM replacement part for Whirlpool made refrigerators including Whirlpool, Amana, Maytag, and many others. It is a component responsible for producing ice cubes or crushed ice, ensuring a constant supply of fresh ice for your convenience. Measuring approximately 11 inches long and 5 inches wide, this ice maker assembly is made of durable plastic and metal
Symptoms of needing a replacement icemaker include:
- No ice production or significantly reduced ice output
- Ice cubes appearing misshapen or clumped together
- Leaks or water buildup in the icemaker area
- Strange noises or grinding sounds coming from the icemaker
Causes of a faulty icemaker can include normal wear and tear over time, water supply issues, clogging or blockages, or electrical malfunctions.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.
Please note: that this ice maker is a replacement only and not suitable for add-ons or brand-new installations. It does not include the harness or hardware. For wire harness(Plug)order WPD7813010. For cover order WPW10289690. For shut off bail arm order WP67004028.
This part fixes the following symptoms
-
Ice maker dispenses too little ice
-
Ice maker not making ice
-
Ice maker won't dispense ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Ice maker stopped producing ice William W. • Southampton , NJ • July 31, 2015
My first hour: I investigated first by pulling out refridgerator to see if the water line hose was kinked. I started under the kitchen sink where it begins, coming from faucet water supply. Then I followed it to the back of the fridge to see if anything looked odd. Next I went to the ice maker itself. I investigated the ice maker by removing the freezer food sliding tray and hanging tray, and then unscrewing the door off the slides. When I looked inside at the ice maker, I saw the tube where...
Read more
More
$95.95
- Compare At:
-
$119.43
- You Save:
-
$23.48
Genuine Whirlpool part
By: Whirlpool
Part Number: EDR4RXD1
The Water Filter is an OEM part for Whirlpool refrigerators. It is designed to filter and purify the water for your refrigerator, ensuring clean and fresh drinking water and ice.
A bad refrigerator water filter can be caused by regular use and the buildup of contaminants over time. It may also become less effective if not replaced according to the manufacturer's recommended schedule.
Symptoms of a bad refrigerator water filter include:
- A decrease in water flow or water pressure.
- An unpleasant taste or odor in the water.
- The presence of particles or sediment in the water.
- Cloudy or discolored ice cubes.
If you notice any of these signs or if it has been more than six months since your last filter replacement, it's time to replace the refrigerator water filter with this genuine OEM part. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Not dispensing water
-
Ice maker dispenses too little ice
-
Ice maker won't dispense ice
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Broken water valve Terry H. • Brighton , CO • March 24, 2014
Ordered part and replaced it
Read more
More
$83.95
- Compare At:
-
$100.74
- You Save:
-
$16.79
Genuine Whirlpool part
By: Whirlpool
Part Number: W10613606
The Compressor Start Relay is an OEM part for Whirlpool refrigerators. This component helps to kickstart the compressor, facilitating the refrigeration cycle that cools the interior of the fridge.
Such issues can stem from electrical failures within the relay, physical damage, or wear and tear from regular use. When the relay does not function correctly, it can lead to inconsistent cooling and, in severe cases, cause the compressor to overheat and fail prematurely.
Symptoms of a failing Compressor Start Relay include:
- The refrigerator not cooling properly or not cooling at all
- A noticeable clicking sound emanating from the back of the refrigerator, indicating the relay is trying to start the compressor but failing
- The refrigerator starts and stops frequently, unable to maintain a constant temperature
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Clicking sound
-
Won't start
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Fan would run but compressor would not start-resulting in no cooling. Thomas F. • De Soto , WI • March 14, 2014
Removed back cover and installed new start device. Plugged in refridgerator and it runs like new.
Read more
More
$53.27
- Compare At:
-
$74.44
- You Save:
-
$21.17
Genuine Whirlpool part
By: Whirlpool
Part Number: W11396033
The Door Switch is an OEM part for Whirlpool refrigerators. This switch is crucial for controlling the interior lights and the activation of certain refrigerator functions when the door is opened or closed.
Symptoms of a failing Door Switch include:
- Interior lights staying on when the refrigerator door is closed
- Interior lights not turning on when the door is opened
- The refrigerator unexpectedly starting or stopping
- Alarms or indicators malfunctioning, signaling an open door when it is closed
Causes of a bad door switch can involve mechanical failure due to wear and tear from frequent use, damage from impacts (such as slamming the door), or electrical issues like a short circuit or faulty wiring.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Light switch on bottom freezer compartment flakey (intermittant) Alfred M. • Pahoa , HI • September 07, 2014
I watched the video on replacing the switch on a side freezer where prying out to original switch did not look difficult. I then got on the floor and tried to pry out my switch. Had a terrible time (locking tab or switch body hardened with time?) and mangled the switch terribly and the upper panel of the freezer somewhat, but the switch did come out. AND THEN the top freezer panel with the switch and light assembly fell out into my hands! I was able to unplug one Molex connector and the...
Read more
More
$29.30
- Compare At:
-
$34.87
- You Save:
-
$5.57
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002355
The Thermistor Kit is an OEM part for Whirlpool refrigerators and freezers. This component plays a role in monitoring and controlling the temperature within your appliance. A thermistor is a type of resistor whose resistance changes with temperature changes, allowing the refrigerator's control system to accurately maintain the desired cooling levels based on the readings it provides.
Causes of a bad thermistor can include wear and tear from constant use, exposure to extreme temperatures that can damage the component, or electrical issues such as short circuits.
Symptoms of a bad Thermistor Kit include:
- The refrigerator or freezer is too cold or not cold enough
- The appliance cycles on and off more frequently or for longer periods than normal
- Unexplained changes in temperature settings
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Fridge too cold
-
Freezer too cold
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Amana model afd2535deb freezer cold fridge too warm not defrosting Dan R. • Woodruff , SC • November 09, 2015
Toughest part of this repair is figuring out how to get things apart. Amana doesn't provide you a repair manual showing how to disengage the various plastic covers. Initially disassembled the bottom freezer compartment so I could get to the evaporator coils; they were completely frozen in block of ice, restricting air flow to the fridge above. Obviously, the auto defrost cycle had not been running, or was short-cycling. Manually defrosted. Found this link for running diagnostic tests on the...
Read more
More
$42.95
- Compare At:
-
$51.54
- You Save:
-
$8.59
Genuine Whirlpool part
By: Whirlpool
Part Number: 833697
This OEM Replacement Part is a high-quality, 2-watt condenser fan motor for Whirlpool refrigerators.The motor is designed to optimize your refrigerator's cooling performance. This 115-volt motor operates with a clockwise rotation.
Symptoms of a bad condenser fan motor kit include:
- Gradual rise in interior freezer temperatures
- Inability to maintain consistent cooling performance
- Loud buzzing or grinding noises coming from inside
- Tripped breakers or failure to restart after service
Causes stem from normal wear of ball bearings as the high-efficiency motor operates continuously. Exposure to dust or debris introduced through openings accelerates wear over many years of use.
This OEM part is also compatible with brands including Kenmore, KitchenAid, and Danby.
This part fixes the following symptoms
-
Fridge runs too long
-
Noisy
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Conderser motor went out David W. • Durand , MI • April 03, 2014
After reviewing the 'how to' video on AppliancePartsPros.com, I unplugged the refrigerator and removed the back cover to access the motor. I then unplugged the wiring and removed the bad motor. I cut the clip plug and wired it to the new motor, installed the fan blade from the old motor and re-installed the new motor. After connecting the clip plug and re-installing the back cover, I plugged the refrigerator in and checked the interior about 5 minutes after the repair. Everything has been...
Read more
More
$61.95
- Compare At:
-
$73.72
- You Save:
-
$11.77
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2169142
The Evaporator Fan Motor Blade is an OEM part for Whirlpool refrigerators. It is a crucial component of the refrigerator's cooling system, attached to the evaporator fan motor to circulate air over the evaporator coils. This circulation helps distribute cold air throughout the refrigerator and freezer compartments, ensuring consistent temperatures and efficient operation.
Symptoms of a bad Evaporator Fan Motor Blade include:
- Unusual noise coming from the fan area, indicating the blade may be hitting another component or is unbalanced,
- Insufficient cooling in the refrigerator or freezer compartments,
- The refrigerator running longer than usual to maintain the desired temperature.
Causes of evaporator fan motor blade failure typically include physical damage from interference with other components, wear from continuous use, or buildup of ice or debris that unbalances the blade.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Loud noise coming from freezer. Periodic grinding like an old fan/motor. Jimmy F. • Evanston , IL • July 26, 2022
The fridge is 20+ years old in a home we recently moved into.
It sounded like a motor getting stuck on something or grinding weird... was hoping it wasn't something more serious. Found this site, clicked 'noisy' and got the replacement evaporator fan motor blade as well as the motor evaporator.
Turned out I didn't really need to replace the fan blade, but since I had it and ours was old, figured I might as well put in the new parts.
Followed the videos here, which were really helpful. The...
Read more
More
$26.95
- Compare At:
-
$32.84
- You Save:
-
$5.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67005154
The Refrigerator Dual Water Inlet Valve is an OEM part for Whirlpool refrigerators. It controls the flow of water into the refrigerator for ice making and water dispensing.
Causes of a bad water inlet valve can include mineral buildup from hard water, electrical malfunctions, or wear and tear over time. These issues can hinder the valve's ability to regulate water flow properly.
Symptoms of a bad water inlet valve include:
- Leaking water from the valve
- No water or ice production
- Low water flow from the dispenser
- Unusual noises when the water dispenser or icemaker is operating
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice maker wasn't getting water to make ice Daniel G. • Franklin , NC • November 24, 2014
Re placed the water inlet valve.
Read more
More
$72.95
- Compare At:
-
$86.81
- You Save:
-
$13.86
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10128551
The Evaporator Fan Motor is an OEM part for Whirlpool refrigerators. It is responsible for circulating air over the evaporator coils, which helps to maintain a consistent temperature throughout the refrigerator and freezer compartments. It operates at a power requirement of 115V, 60Hz, and 0.14A, featuring a shaft that measures 1/8" in diameter and 5/8" in length.
Causes of a bad evaporator fan motor can include electrical failures, wear and tear from continuous use, or obstruction from debris that hinders the fan's movement. A malfunctioning fan motor can lead to uneven cooling and compromised performance of the refrigerator.
Symptoms of a bad evaporator fan motor include:
- Inconsistent temperatures in the refrigerator or freezer
- Unusual noises coming from the fan area
- The refrigerator running continuously without cycling off
- Frost buildup on the evaporator coils
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Evaporator fan stopped working Robert M. • Metairie , LA • December 25, 2016
The fan has a very thin wire in it's coil, and when that wire breaks, you need a new fan. In a previous repair, i noticed that an ice build-up had dislodged the wiring on my fan and severed the coil winding. I was able to undo the winding a couple of turns and get it working again.
But more recently, the fan stopped and there was no repairing it. So i ordered a new fan from AppliancePartsPros.com and it got here in very good time. The new fan was slightly different as the prongs seemed to be...
Read more
More
$54.26
- Compare At:
-
$72.13
- You Save:
-
$17.87
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67003903
The Damper Control is an OEM part for Whirlpool refrigerators. It regulates the airflow between the freezer and refrigerator compartments, maintaining the appropriate temperatures in each section. This component ensures that cold air is distributed properly, contributing to the overall efficiency and performance of the refrigerator.
Common causes of a bad damper control can include wear and tear over time, electrical failures, or mechanical obstructions. A malfunctioning damper control can lead to temperature imbalances, affecting the preservation of food.
Symptoms of a bad damper control include:
- Inconsistent temperatures between the freezer and refrigerator
- Freezer overly cold while the refrigerator is too warm, or vice versa
- Frost buildup in the refrigerator compartment
- Unusual noises coming from the damper area
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
It was freezing our vegetables Gray L R. • Walla Walla , WA • February 13, 2017
I replaced the thermistor and the damper control. I couldn't have done it without the videos showing me how to get stuff apart
Read more
More
$111.95
- Compare At:
-
$133.22
- You Save:
-
$21.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67004106
The Water Filter Head and Tube Assembly is an OEM part for Whirlpool refrigerators. It is located inside the refrigerator, near the upper corner, or on the rear wall. It houses the water filter and serves as the connection point between the filter and the water line.
Causes of a faulty or damaged water filter head and tube assembly can include regular use, wear and tear, or leaks due to loose connections or cracks.
Symptoms of a bad water filter head and tube assembly may include:
- Reduced or slow water flow from the dispenser
- Water leaks around the assembly or filter area
- Difficulty in installing or removing the water filter
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
No water pressure when press water dispenser Tomas Q. • Copperas , TX • July 22, 2014
If you have a problem of water pressure when you press for water at the dispenser your problem migth be your filter head assembly. Thanks to appliAncepartspros for their assistance
Read more
More
$91.95
- Compare At:
-
$109.42
- You Save:
-
$17.47
Genuine Whirlpool part
By: Whirlpool
Part Number: R0181181
The Door Closure Kit is an OEM replacement part for Whirlpool refrigerators. The kit includes all the necessary parts to ensure your refrigerator door closes and seals properly - including two black and two white cams used for both the door and the hinge.
Over time, door closure mechanisms can wear down from continual opening and closing motions. The cushions compress and arms lose tension. Without a tight seal, cold air can escape raising energy costs.
Symptoms of a bad door closure kit include:
- Doors not closing or sealing fully
- Difficulty closing doors that don't latch securely
- Noticeable cool air loss around door edges
- Frost buildup indicating air leakage
It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Door won't open or close
-
Door sweating
-
Fridge too warm
-
Clicking sound
See more...
Do-It-Yourself Stories from Customers like You
Door didn't close the bottom cam was worn out Miguel G. • Ridgecrest , CA • October 17, 2015
Used floor jack to lift and secure door, left upper hinge point in place, removed lower hinge support, removed old cams and installed new ones and lubricated, secured and adjusted hinge .
Read more
More
$10.43
- Compare At:
-
$12.41
- You Save:
-
$1.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12568001
The Water Filter Cover is an OEM part for Whirlpool refrigerators. This cover encases and protects the water filter, ensuring it remains secure and clean while also blending seamlessly with the refrigerator's interior design.
You should replace the water filter cover if it becomes damaged or fails to secure the filter properly. Common causes of a bad water filter cover include physical damage from accidental impact, wear and tear from regular use, or warping due to temperature fluctuations.
Symptoms of a bad water filter cover include:
- Cracks or visible damage to the cover
- Difficulty securing the water filter
- The cover not fitting properly or coming loose
- Leaks around the water filter area
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water filter holder was broken John B. • Chester , VA • June 04, 2015
Used screwdriver to push in plastic tabs holding old unit to the top of the refrigerator box
Read more
More
$58.47
- Compare At:
-
$70.16
- You Save:
-
$11.69
Genuine Whirlpool part
By: Whirlpool
Part Number: W11395888
The Cartridge Bypass is an OEM part for Whirlpool refrigerators. It is designed to replace the water filter cartridge when filtration is not desired or necessary. This allows the refrigerator to bypass the filter and provide unfiltered water to the dispenser and ice maker.
Common causes of failure include wear and tear, improper installation, or physical damage from mishandling.
Symptoms of a bad Cartridge Bypass include:
- Water leakage around the filter area
- Reduced water flow or no water flow from the dispenser
- Ice maker not producing ice
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water dispenser made a lot of noise Pablo C. • Apex , NC • November 23, 2015
Water dispenser came down to a trickle and made a lot of noise, I changed the filter but it didnt help and thus the water tank/head assembly needed to be replaced.
Replacing the water Tank/head assembly was an easy task, the hardest part is removing the covers and taking care of not breaking the insulation of the water inlet hose.
For the not-so-experts like me it is also good to rememebr to have a bucket to collect all the water that comes out after the connection to the solenoid valves is...
Read more
More
$43.95
- Compare At:
-
$52.30
- You Save:
-
$8.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10289690
This ice maker cover shields the front of the ice maker assembly, protecting the module and moving parts from dust and accidental contact. Replacing a cracked or missing cover restores a clean, finished appearance and keeps components protected.
- Shields the ice maker's front components and control module
- Helps keep dust, splashes, and debris out of the mechanism
- Prevents accidental contact with moving ejector parts
- Replace if the cover is cracked, warped, missing, or will not stay attached
What's included: 1 ice maker cover Install notes:
- Unplug the refrigerator before servicing
- Access the ice maker in the freezer compartment
- Carefully release the retaining tabs and remove the old cover; note orientation
- Align the new cover and press until it snaps securely into place—do not force the tabs
Do-It-Yourself Stories from Customers like You
Ice maker quit working Peter S. • Lawton , MI • October 29, 2015
Replaced icemaker and shutoff arm. Easy project.
Read more
More
$8.36
- Compare At:
-
$9.95
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12565502
The Ice Chute Door Spring is an OEM part for Whirlpool refrigerators. This part returns the ice chute door to its closed position after ice has been dispensed, ensuring the door remains sealed to maintain proper temperature and efficiency.
Causes of a bad ice chute door spring can include wear and tear over time, corrosion from exposure to moisture, or damage due to repeated use or mishandling.
Symptoms of a bad ice chute door spring include:
- The ice chute door not closing properly
- Ice or frost buildup around the ice chute
- Warm air entering the freezer compartment
- Difficulty in dispensing ice
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Flapper for ice and water broke. Jack W. • Bandon , OR • December 02, 2017
Ordered new part, very easy to replace only took about 5 minutes to install new part and get everything going again. Part was a perfect fit and was shipped and received in only a few days. Thanks
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07