Kitchenaid Duty Moisture Sensor Bags Parts

Best Seller

Genuine Whirlpool part

Kitchenaid Dryer Thermal Fuse

4.9 (2224)

By: Whirlpool

Part Number: WP3392519

Stop dryer downtime in its tracks — install the Whirlpool WP3392519 OEM Thermal Fuse in minutes.

OEM Quality Fast 1–2 Day Shipping* Free Tech Help

Why choose this fuse?

Guaranteed OEM: built by Whirlpool to Whirlpool specs — no risky aftermarket clones.
Broad compatibility: works with Whirlpool, Kenmore, Maytag, KitchenAid, Roper & more.
Quick delivery: over 94 % of APP orders arrive in 2 days or less.

Fixes these common dryer problems

Problem	How the fuse is involved
Dryer won’t start	Blown fuse interrupts motor circuit
No heat / not enough heat	Heater circuit disabled for safety
Cycle ends early	Over-temp trip stops cycle
Control panel dead	Power to controls interrupted

4-step DIY installation (≈10 min)

Unplug dryer and remove rear panel.
Locate thermal fuse on blower housing.
Transfer wires; secure new fuse with ¼-inch nut-driver.
Clean the vent & lint path before testing to prevent repeat failure.

*Video tutorial below.

Ready to get heat back?
Click Add to Cart now & enjoy industry-leading 1–2 day delivery on

This part fixes the following symptoms

Won't start
Timer will not advance
No heat or not enough heat
Touchpad does not respond

Do-It-Yourself Stories from Customers like You No heat Dennis G. • Kearny , NJ • January 14, 2017

I did the recommended checks of parts as listed on the website. I would recommend as one other person did but I did not listen the first time and that is to check all the parts don't stop at the first part you find bad. As I had to make two orders paying shipping twice because I thought I found a bad part when testing the igniter but the thermal fuse was also bad and since in a different part of the machine I did not take the time to check it, bad mistake. Also one tool mentioned in the video... Read more

$17.95

Compare At:: $21.54
You Save:: $3.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kitchenaid Dryer Cycling Thermostat

4.9 (654)

By: Whirlpool

Part Number: WP3387134

This Dryer Cycling Thermostat is an OEM replacement part for Whirlpool dryers. It monitors internal temperatures and cycles power to the heating element accordingly. The thermostat ensures the drying air reaches and maintains the optimal heat level selected for fast, effective drying results.

Symptoms of a bad cycling thermostat include:

The dryer not heating or heating inconsistently
Frequent trips of the circuit breaker
Slower than normal drying times
Burned clothes due to overheating

Causes of failure may be related to normal wear over time, dust buildup affecting sensor readings, or incorrect thermostat calibration.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Too hot
Timer will not advance
Takes too long to dry
Doesn't shut off

Do-It-Yourself Stories from Customers like You My 22 year old dryer just stopped getting hot Michael M. • Brunswick , GA • November 04, 2015

After 22 years my Kenmore (Whirlpool) dryer stopped getting hot. So I went ahead and reviewed the videos and figured I could repair it myself. It should be noted that the only part that failed the Ohm test was the thermal fuse. However, I figured that since I have it apart, I might as well go ahead and replace the heating element and the cycling thermostat. Here is a rundown of what I did and how long it took: • Taking the back off and vacuum <1 minute • Finding the components (from the... Read more

$26.95

Compare At:: $32.34
You Save:: $5.39

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kitchenaid Dryer Thermal Cut-Off Kit

4.9 (718)

By: Whirlpool

Part Number: 279816

This dryer thermal cut-off kit is an authentic OEM replacement part for Whirlpool and Kenmore dryers. It is designed to prevent the dryer from overheating.

This Kit Includes:

High Limit Thermostat (250°F Limit)
A Cut Off Fuse (309°F Limit)
Female Spade Terminals
Jumper Wires

Over time, these components can fail due to electrical issues, lint buildup blocking the exhaust vent, or normal wear and tear. A malfunctioning thermal cut-off kit can result in overheating, which can pose a safety hazard and affect the dryer’s performance.

Symptoms of a bad Thermal Cut-Off Kit include:

Dryer not heating
Dryer overheating
Dryer shutting off mid-cycle
No response when attempting to start the dryer

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Timer will not advance
No heat or not enough heat
Too hot
Doesn't shut off

Do-It-Yourself Stories from Customers like You My 22 year old dryer just stopped getting hot Michael M. • Brunswick , GA • November 04, 2015

$45.95

Compare At:: $55.14
You Save:: $9.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kitchenaid Thermistor

4.9 (336)

By: Whirlpool

Part Number: WP8577274

The Thermistor is an OEM part for Whirlpool brand dryers. It is a temperature-sensing resistor that monitors air temperature changes during the drying cycle. The thermistor provides feedback to the control board on heating element performance and internal air condition.

Symptoms of a failed thermistor include:

Inaccurate temperature readings and selections
Improper or incomplete drying
Safety issues from overheating due to lack of feedback
Error codes displayed on the control panel

Causes can be related to normal wear and environmental exposure over time. Failure prevents the dryer from achieving optimal drying conditions.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Too hot
Shuts off too soon

Do-It-Yourself Stories from Customers like You First longer to dry then no heat in dryer Bobbie M. • King George , VA • October 06, 2017

I am not an electrician, just a housewife with limited funds and a desire to DIY. I used the provided videos for knowing how to replace everything except the heating element which I just guessed based on other reviews and seeing how the other parts worked. Our dryer is 11 years old Whirlpool Gold HE and I have only ever cleaned the lint tray. My husband replaced the belt about five years ago and he did clean out the inside of the dryer. Started by ordering a thermal fuse because it was... Read more

$35.58

Compare At:: $41.98
You Save:: $6.40

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kitchenaid Hi-Limit Thermostat

4.9 (197)

By: Whirlpool

Part Number: WP3977767

The Hi-Limit Thermostat is an OEM part for Whirlpool dryers. It functions as a critical safety device that monitors and controls the temperature within the dryer, preventing it from overheating. When the dryer reaches a temperature that is too high, this thermostat will cut off the power to the heating element to mitigate the risk of fire.

Symptoms of a bad Hi-Limit Thermostat include:

Dryer not heating adequately or at all
Clothes taking longer than usual to dry
The dryer repeatedly shutting off during a cycle
Excessive heat emitted from the dryer even on lower settings

Causes of a bad Hi-Limit Thermostat can include a malfunction due to electrical issues, lint buildup causing restricted airflow and increased temperature, or failure of other components like the cycling thermostat that can cause the dryer to overheat.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Clothes dryer was not heating Joseph N. • Dallastown , PA • December 07, 2016

I used the Appliance Parts Pros d.i.y. video to get some oversight on the repair; ordered the parts (heating element, Hi-Limit T-stat and Dryer Thermal Cut-Off kit). I unplugged the electric; disconnected the exhaust duct; moved the clothes dryer so that I could remove the back sheet metal panel. The electrical connection at the heater "Stacon" terminal was corroded and broken - an open circuit. This had happen about 10 years before and I was familiar with this problem. After removing the... Read more

$19.95

Compare At:: $23.94
You Save:: $3.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kitchenaid Thermal Cut Off Kit

4.9 (234)

By: Whirlpool

Part Number: 279973

The Thermal Cut-Off Kit is an OEM replacement part for Whirlpool dryers, responsible for protecting the dryer from overheating by interrupting the power flow to the heating element if the dryer air temperature reaches a dangerously high level.

Symptoms of a bad Thermal Cut-Off Kit include:

The dryer not heating up
Excessive heat buildup within the dryer drum
Clothes not drying properly

Causes of failure can include restricted airflow from a clogged lint filter or venting system or a malfunctioning heating element causing excessive temperatures. These issues can lead to the thermal cut-off being triggered to prevent overheating, necessitating the replacement of the kit.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Note: It's possible some models may use part number 280148 in place of this. Look at photo's for verification.

This part fixes the following symptoms

Too hot

Do-It-Yourself Stories from Customers like You First longer to dry then no heat in dryer Bobbie M. • King George , VA • October 06, 2017

$43.95

Compare At:: $52.30
You Save:: $8.35

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kitchenaid Moisture Sensor Bar

4.9 (173)

By: Whirlpool

Part Number: WP3387223

The Moisture Sensor Bar is an OEM replacement part for Whirlpool dryers. It is a component located inside the dryer drum that senses the moisture level of clothes during tumble drying cycles. The moisture sensor bar utilizes sensors or probes to gauge how dry clothes are getting and signals the dryer to shut off once clothes reach the desired dryness level selected by the user.

Symptoms of a bad moisture sensor bar include:

Dryer failing to shut off automatically at the end of cycles, leaving clothes over-dried
Cycles taking excessively long to complete
Dryer not sensing moisture levels properly to allow automatic ending of cycles

Causes of a faulty moisture sensor bar are usually due to normal wear and tear over time. Dust or lint buildup can also affect its ability to provide accurate readings.

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You First longer to dry then no heat in dryer Bobbie M. • King George , VA • October 06, 2017

$9.95

Compare At:: $11.74
You Save:: $1.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kitchenaid Flame Sensor

4.9 (231)

By: Whirlpool

Part Number: WP338906

The Flame Sensor is an OEM replacement part for Whirlpool gas dryers. This component plays a critical safety role by monitoring the presence of the gas burner flame during the drying cycle.

Causes of needing to replace the flame sensor can include normal wear and tear over extended use, exposure to high temperatures or corrosion, or physical damage to the sensor itself.

Symptoms that may indicate a faulty flame sensor include:

The dryer not heating or producing heat properly
Error codes related to the gas system or ignition failure
The dryer shutting off unexpectedly during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models.

This part fixes the following symptoms

Shuts off too soon
No heat or not enough heat
Takes too long to dry

Do-It-Yourself Stories from Customers like You 11 year old kenmore elite gas drye stopped working initial diagnosis: burner would light but would shut off in 3 or 4 minutes Jay W. • Dallas , TX • April 05, 2015

I used Fixya as an initial source describing my problem. I got two responses which were very helpful. One that the "coils" were probably the problem. Two, that the problem could be the thermostat or a thermistor in the dryer. I verified that AC was coming from the timing control, that both the two terminal and three terminal coils,the igniter and shut off thermostat all had continuity. I then applied AC directly to the coils: the two terminal coil ""clanked" and I interpreted that as the coil... Read more

$34.95

Compare At:: $41.59
You Save:: $6.64

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kitchenaid Defrost Thermostat

4.9 (134)

By: Whirlpool

Part Number: WPW10225581

The Defrost Thermostat is an OEM part for Whirlpool refrigerators. It is responsible for monitoring the temperature of the evaporator coils. When the coils reach a certain temperature, the thermostat signals the defrost heater to turn on and melt any ice or frost buildup. This ensures proper airflow and prevents excessive ice formation.

Causes of a bad defrost thermostat can be attributed to normal wear and tear over time or electrical malfunctions.

Symptoms of a bad defrost thermostat include:

Excessive ice buildup in the freezer section.
Inadequate cooling in the refrigerator compartment.
Frost or ice accumulating on the evaporator coils.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Frost buildup
Freezer not defrosting
Freezer section too warm
Fridge too warm

Do-It-Yourself Stories from Customers like You Fridge side wasn't staying cold massive ice build up in freezer ice blockage in fan duct Christopher M. • Yorba Linda , CA • December 15, 2014

Condenser was encased in solid block of ice due to automatic defrost not working. Replaced thermostat and ADC control board. Working fine now. Most tedious part was using a heat gun to melt all the ice off the condenser coils. You will need a couple small wire nuts to splice the new thermostat into the existing harness (they are not included). Service tech wanted over $400 to repair, fixed it myself for half that. Thanks ! Read more

$33.95

Compare At:: $40.74
You Save:: $6.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kitchenaid Thermal Cut-Off Kit

4.9 (209)

By: Whirlpool

Part Number: 279769

The Thermal Cut-Off Kit is an OEM part for Whirlpool dryers. This safety kit is designed to protect the dryer from overheating by interrupting the heat source when the dryer air temperature reaches dangerously high levels. The kit typically includes one high-limit thermostat and one thermal cut-off fuse. These components are critical for preventing potential fire hazards by ensuring that the dryer operates within safe temperature ranges.

Symptoms of a failing thermal cut-off kit include:

Dryer not heating up at all, as the thermal fuse may have been triggered
Excessive heat in the dryer, prior to the fuse being triggered
Frequent stopping of the dryer during cycles

Causes of thermal cut-off failure often involve restricted airflow (from lint buildup or obstructed vents), component failure within the heating system, or issues with the dryer cycling thermostat that cause abnormal heating.

This OEM part is also compatible with Kenmore, Maytag, KitchenAid, Roper, and other brands manufactured by Whirlpool.

This part fixes the following symptoms

No heat or not enough heat
Too hot

Do-It-Yourself Stories from Customers like You Old Whirlpool dryer model LE8650XWW0 would not heat purchase in 1993. Byron V. • Huntsville , AL • December 08, 2017

Since the dryer was 24 years old I opted to replace all the possible problem components, instead of just the bad one. The parts aren't that expensive and do to their age I figured it was worth it to avoid having to go back into the dryer in a few months. The repair was surprisingly easy and went pretty much as the video instruction AppliancePartPros provided with one exception. Because, my model was much older than that used in the video, I had a more difficult time replacing the Heating... Read more

$34.95

Compare At:: $41.94
You Save:: $6.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kitchenaid High Limit Thermostat

4.9 (38)

By: Whirlpool

Part Number: WP661566

Thermostat has 1/4 inch terminals.

The High Limit Thermostat is an OEM part for Whirlpool dishwashers. This safety feature is designed to prevent the dishwasher from overheating by shutting off the power if the internal temperature exceeds a certain limit. It acts as a safeguard against potential hazards, such as fires, and ensures the dishwasher operates within safe temperature ranges.

Over time, the high limit thermostat can become defective due to normal wear or electrical issues within the dishwasher. A malfunctioning thermostat may not accurately respond to temperature changes, which can lead to overheating or the dishwasher not reaching the necessary temperature for optimal cleaning.

Symptoms of a bad High Limit Thermostat include:

Dishwasher not starting or completing a cycle
The dishwasher stops heating water, affecting cleaning performance
Overheating, which could potentially damage dishes or the dishwasher itself

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Not drying dishes properly

Do-It-Yourself Stories from Customers like You Whirlpool dishwasher not fully cleaning or drying dishes. Andrew M. • Seattle , WA • January 05, 2020

My Whirlpool dishwasher (wdf520padm3) started leaving food on dishes and not drying dishes as well as it used to, even when I ran the 'high temp' and 'heavy' cleaning options. This started happening after about 3 years of operation. To try to diagnose the issue, I started the diagnostics cycle (see below for instructions on how to do this). However, the 'Clean' LED is also not working on my dishwasher, so I was unable to read the error code after the service cycle finished. I decided to... Read more

$27.95

Compare At:: $32.98
You Save:: $5.03

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kitchenaid Thermal Fuse (Disposable, One Time Fuse)

4.9 (165)

By: Whirlpool

Part Number: WP3390719

The Thermal Fuse is an OEM part for Whirlpool dryers. It is a critical safety component designed to protect the dryer from overheating by blowing and cutting off power if the temperature exceeds safe limits. This disposable, one-time fuse is essential for preventing potential fire hazards and ensuring the appliance operates within safe temperatures.

Symptoms of a bad Thermal Fuse include:

The dryer not starting or suddenly stopping during a cycle
No heat being produced while the dryer is running
Unexplained cessation of all dryer functions

Causes of a bad thermal fuse can stem from restricted airflow due to lint buildup, a malfunctioning heating element that causes excessive temperatures, or other electrical issues within the dryer.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

No heat or not enough heat

Do-It-Yourself Stories from Customers like You My maytag bravos xl dryer would not dry properly it would run but with very little heat cycles were twice as long as previous to get clothes dry Mike C. • Lawrenceburg , IN • May 11, 2015

I replaced the "heating element" which was bad.........as well as the "Thermst-fix" and "Thermal Cutoff" which are located on the side of the element mounting location while I had the dyer all opened up and the element mounting tube removed.......I also replaced the Dryer Thermister which is located on the top of the blower fan.....To get to these parts, you must open the top of the dryer which has spring latches on both sides of the front corners... they need to be pressed in (use a putty... Read more

$19.95

Compare At:: $23.74
You Save:: $3.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kitchenaid Thermal Fuse

4.9 (234)

By: Whirlpool

Part Number: W10258275

The Thermal Fuse Kit is a genuine OEM Replacement part. This kit is designed to cut off power to the dishwasher if it overheats. The fuse ensures that your appliance operates safely and effectively. If your dishwasher is not starting, it may be due to a failed thermal fuse. Investigate what caused the dishwasher to overheat before replacing the thermal fuse.

This Kit Includes:

(1) Thermal Cutoff (TCO)
(1) Harness Assembly
(2) Zip Ties
Instructions

Specs:

Electrical specs: 86°C, 187°F fuse
Construction: metal/plastic
Fuse dimensions: 5/8""L x 5/8""W x 1-1/4""H
Harness and plug dimensions: 4-7/8""L
Zip tie dimensions: 6-3/4""L

Repair your dishwasher today with the Thermal Fuse Kit and ensure that your appliance operates safely and efficiently for years to come.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Thermal fuse and control panel for my maytag dishwasher both failed and needed to be replaced Richard C. • Cape Canaveral , FL • November 01, 2014

Ordered a new thermal fuse from your website last week and installed it three days ago. This is the second fuse in one year that needed to be replaced. The dishwasher was purchased new in 2012. Relatively easy to replace. Your website had a you tube video that showed how to replace it. Power came back on the control panel, but the start button (not a button, but a touch screen) would not work. This is the second time in two years that the control panel had to be replaced because the start... Read more

$30.95

Compare At:: $36.83
You Save:: $5.88

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kitchenaid Thermistor Kit

4.8 (45)

By: Whirlpool

Part Number: 12002355

The Thermistor Kit is an OEM part for Whirlpool refrigerators and freezers. This component plays a role in monitoring and controlling the temperature within your appliance. A thermistor is a type of resistor whose resistance changes with temperature changes, allowing the refrigerator's control system to accurately maintain the desired cooling levels based on the readings it provides.

Causes of a bad thermistor can include wear and tear from constant use, exposure to extreme temperatures that can damage the component, or electrical issues such as short circuits.

Symptoms of a bad Thermistor Kit include:

The refrigerator or freezer is too cold or not cold enough
The appliance cycles on and off more frequently or for longer periods than normal
Unexplained changes in temperature settings

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Fridge too cold
Freezer too cold
Fridge too warm

Do-It-Yourself Stories from Customers like You Amana model afd2535deb freezer cold fridge too warm not defrosting Dan R. • Woodruff , SC • November 09, 2015

Toughest part of this repair is figuring out how to get things apart. Amana doesn't provide you a repair manual showing how to disengage the various plastic covers. Initially disassembled the bottom freezer compartment so I could get to the evaporator coils; they were completely frozen in block of ice, restricting air flow to the fridge above. Obviously, the auto defrost cycle had not been running, or was short-cycling. Manually defrosted. Found this link for running diagnostic tests on the... Read more

$42.95

Compare At:: $51.54
You Save:: $8.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kitchenaid Trash Compactor Bags

5.0 (11)

By: Whirlpool

Part Number: W10165294RB

The Trash Compactor Bags are OEM parts for Whirlpool trash compactors. These heavy-duty bags are designed to fit securely within the trash compactor, ensuring that waste is contained and compressed efficiently. They are built to withstand the pressure and volume of compacted trash, preventing leaks and tears. This is a 60-pack.

You should replace these trash compactor bags regularly to maintain optimal performance. Over time, bags can become overfilled, punctured, or weakened due to the weight and sharp objects in the trash.

Symptoms of bad trash compactor bags include:

Bags tearing or leaking during use
Difficulty in fitting the bags properly into the compactor
Overflow or spillage of waste
Noticeable odor from the trash compactor

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Needed quality compactor bags David A. • New Castle , IN • July 28, 2017

Ordered quality bags for compactor easily, and delivery to door was quick. Read more

$55.36

Compare At:: $65.88
You Save:: $10.52

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Kitchenaid Turbidity Sensor

4.9 (31)

By: Whirlpool

Part Number: WPW10705575

The Turbidity Sensor is an OEM part for Whirlpool dishwashers. It detects the level of particles in the water during the wash cycle, allowing the dishwasher to adjust the cycle duration and water usage for optimal cleaning performance. This sensor ensures that dishes are thoroughly cleaned by monitoring water clarity.

You should replace the turbidity sensor if it becomes faulty or damaged. Causes of a bad turbidity sensor can include regular wear and tear, exposure to hard water minerals, or electrical malfunctions. A malfunctioning sensor can lead to inefficient cleaning cycles and poor wash results.

Symptoms of a bad turbidity sensor include:

Dishes not being cleaned properly
Dishwasher running longer than usual or shorter cycles
Error codes related to the sensor
Inconsistent wash performance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You F7 e1 error code water not getting hot. David F. • Austin , TX • September 14, 2021

My wife said we have a problem with our dishwasher (Whirlpool WDT920SADE2). The dishes were not getting clean, and the soap dispenser opened, but soap was still dribbled down the inside of the door and on the silverware caddy. I'm not the handiest guy; it took me several days to go through the trouble-shooting process, watching multiple videos and trying different things. My initial guess was that the soap dispenser was opening too late. (This turned out to be wrong.) I started off by... Read more

$31.37

Compare At:: $37.33
You Save:: $5.96

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance Type

Kitchenaid

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Kitchenaid Duty Moisture Sensor Bags Parts

Kitchenaid Dryer Thermal Fuse

Why choose this fuse?

Fixes these common dryer problems

4-step DIY installation (≈10 min)

Kitchenaid Dryer Cycling Thermostat

Kitchenaid Dryer Thermal Cut-Off Kit

Kitchenaid Thermistor

Kitchenaid Hi-Limit Thermostat

Kitchenaid Thermal Cut Off Kit

Kitchenaid Moisture Sensor Bar

Kitchenaid Flame Sensor

Kitchenaid Defrost Thermostat

Kitchenaid Thermal Cut-Off Kit

Kitchenaid High Limit Thermostat

Kitchenaid Thermal Fuse (Disposable, One Time Fuse)

Kitchenaid Thermal Fuse

Kitchenaid Thermistor Kit

Kitchenaid Trash Compactor Bags

Kitchenaid Turbidity Sensor

Appliance Type