Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Kitchenaid Defrost Thermostat, Sensor

Best Seller
Kitchenaid Defrost Thermostat
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10225581

The Defrost Thermostat is an OEM part for Whirlpool refrigerators. It is responsible for monitoring the temperature of the evaporator coils. When the coils reach a certain temperature, the thermostat signals the defrost heater to turn on and melt any ice or frost buildup. This ensures proper airflow and prevents excessive ice formation.

Causes of a bad defrost thermostat can be attributed to normal wear and tear over time or electrical malfunctions.  

Symptoms of a bad defrost thermostat include:

  • Excessive ice buildup in the freezer section.
  • Inadequate cooling in the refrigerator compartment.
  • Frost or ice accumulating on the evaporator coils.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Frost buildup
  • Freezer not defrosting
  • Freezer section too warm
  • Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You Fridge side wasn't staying cold massive ice build up in freezer ice blockage in fan duct   Christopher M. • Yorba Linda , CA • December 15, 2014

Condenser was encased in solid block of ice due to automatic defrost not working. Replaced thermostat and ADC control board. Working fine now. Most tedious part was using a heat gun to melt all the ice off the condenser coils. You will need a couple small wire nuts to splice the new thermostat into the existing harness (they are not included). Service tech wanted over $400 to repair, fixed it myself for half that. Thanks ! Read more

More
$33.95
Compare At:
$40.74
You Save:
$6.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kitchenaid Thermistor Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002355

The Thermistor Kit is an OEM part for Whirlpool refrigerators and freezers. This component plays a role in monitoring and controlling the temperature within your appliance. A thermistor is a type of resistor whose resistance changes with temperature changes, allowing the refrigerator's control system to accurately maintain the desired cooling levels based on the readings it provides. 

Causes of a bad thermistor can include wear and tear from constant use, exposure to extreme temperatures that can damage the component, or electrical issues such as short circuits.

Symptoms of a bad Thermistor Kit include:

  • The refrigerator or freezer is too cold or not cold enough
  • The appliance cycles on and off more frequently or for longer periods than normal
  • Unexplained changes in temperature settings

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Fridge too cold
  • Freezer too cold
  • Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You Amana model afd2535deb freezer cold fridge too warm not defrosting   Dan R. • Woodruff , SC • November 09, 2015

Toughest part of this repair is figuring out how to get things apart. Amana doesn't provide you a repair manual showing how to disengage the various plastic covers. Initially disassembled the bottom freezer compartment so I could get to the evaporator coils; they were completely frozen in block of ice, restricting air flow to the fridge above. Obviously, the auto defrost cycle had not been running, or was short-cycling. Manually defrosted. Found this link for running diagnostic tests on the... Read more

More
$42.95
Compare At:
$51.54
You Save:
$8.59

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kitchenaid Defrost Bimetal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4387503

The Defrost Bimetal is an OEM part for Whirlpool refrigerators. It acts as a safety thermostat that monitors and controls the temperature during the defrost cycle. This component ensures that the defrost heater turns off when the evaporator coil reaches a specific temperature, preventing overheating and potential damage.

Causes of failure may include a malfunction due to wear and tear over time, electrical failure, or damage from moisture and ice.  

Symptoms of a bad Defrost Bimetal include:

  • The refrigerator is constantly running without cycling off
  • Frost buildup on the evaporator coils, leading to reduced cooling efficiency
  • The refrigerator or freezer compartment is too warm
  • Unusual fluctuations in refrigerator temperature

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms
  • Frost buildup
  • Freezer too cold
  • Freezer not defrosting
  • Fridge too cold
See more...
Do-It-Yourself Stories from Customers like You Frost buildup. Food not completely frozen. Running continuously and refrigerator too warm   Robert K. • Louisville , KY • February 07, 2021

By reading stories of other customers who had bought this part, the first thing I looked for when troubleshooting my near-18 year old Frigidaire was for the top to be erupted or raised up on the bimetal defrost. It was truly a case of “look for the simple explanation first.” Once I determined that the bimetal defrost appeared to be the culprit, I ordered the part from Appliance Parts Pros. The back panel (evaporator cover) on my freezer was totally encrusted with ice. So I'm waiting for this to... Read more

More
$31.95
Compare At:
$38.02
You Save:
$6.07

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kitchenaid Icemaker Cycling Thermostat
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627985

The Icemaker Cycling Thermostat is an OEM part for Whirlpool refrigerators. This thermostat plays a crucial role in the icemaker's operation by monitoring the temperature in the icemaker and ensuring it is at the appropriate level for proper ice production. It reads the temperature to determine when the icemaker should cycle on and off.

Causes of a bad icemaker cycling thermostat can include electrical malfunctions, temperature sensor issues, or wear and tear.

Symptoms of a bad icemaker cycling thermostat may include:

  • Inconsistent ice production.
  • The icemaker not cycling properly.
  • The icemaker not dumping the ice into the ice bin.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You Ice maker wouldnt make ice   Ty G. • Lewis Center , OH • December 30, 2014

I used your online troubleshooting tips and watched the videos on your site. I determined my thermostat was defective, ordered the thermostat which arrived in two days and I replaced the thermostat and I now have a full bin of ice !!! The do it yourself video was extremely helpful and made the repair very easy. Thanks so much for the great service and quick delivery !!! Read more

More
$53.95
Compare At:
$64.74
You Save:
$10.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kitchenaid Defrost Thermostat
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67003426

The Defrost Thermostat is an OEM part for Whirlpool refrigerators. It monitors the temperature of the evaporator coil and signals the defrost heater to turn on when necessary, preventing frost buildup on the coil.

You should replace the defrost thermostat if it becomes faulty or damaged. Causes of a bad defrost thermostat can include electrical issues, exposure to moisture, or general wear and tear over time.

Symptoms of a bad defrost thermostat include:

  • Frost buildup on the evaporator coil
  • The refrigerator running constantly or not cooling properly
  • Water leaks inside the refrigerator
  • The defrost heater not activating during the defrost cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Freezer not defrosting
  • Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You Amana model afd2535deb freezer cold fridge too warm not defrosting   Dan R. • Woodruff , SC • November 09, 2015

Toughest part of this repair is figuring out how to get things apart. Amana doesn't provide you a repair manual showing how to disengage the various plastic covers. Initially disassembled the bottom freezer compartment so I could get to the evaporator coils; they were completely frozen in block of ice, restricting air flow to the fridge above. Obviously, the auto defrost cycle had not been running, or was short-cycling. Manually defrosted. Found this link for running diagnostic tests on the... Read more

More
$51.78
Compare At:
$61.62
You Save:
$9.84

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kitchenaid Defrost Thermostat Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001937

The Defrost Thermostat Kit is an OEM part for Whirlpool refrigerators. It regulates the temperature in the freezer during the defrost cycle, ensuring that the defrost heater activates to melt any frost buildup and then turns off to maintain the proper freezer temperature. This thermostat opens at 42°F and closes at 30°F. This mechanism allows for short, controlled heating periods to melt frost without affecting the contents of the appliance.

You should replace this defrost thermostat kit if it becomes defective. Common causes of a bad defrost thermostat include electrical failures, prolonged exposure to extreme temperatures, or wear and tear over time.

Symptoms of a bad defrost thermostat include:

  • Frost buildup in the freezer
  • The refrigerator running continuously without cycling off
  • The freezer not maintaining the correct temperature
  • Water leaks from the freezer during the defrost cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Freezer not defrosting
  • Freezer too cold
  • Fridge too warm
  • Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You Freezer was cold but refrigerator was warm   Beth M. • Marengo , IL • August 06, 2018

After we moved into our new home, we realized that the freezer was very cold and the fins were frosting over, and the refrigerator wasn't cold. We had to take it apart and manually defrost it about once every 8 to 10 days. After research online, we found Appliance Parts Pros videos, which clearly explained how to fix it ourselves, a savings of at least $1,000 or more, since a new one of this size would have been in the arena of $1,200 to $2000. We ordered the three most likely parts to be bad,... Read more

More
$64.61
Compare At:
$76.89
You Save:
$12.28

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kitchenaid Temperature Sensor
Genuine Whirlpool part
By: Whirlpool
Part Number: W10316760

The Refrigerator Temperature Sensor is an OEM replacement part for Whirlpool refrigerators. It is a crucial component responsible for accurately monitoring and regulating the temperature inside the refrigerator and freezer compartments.

Symptoms of a faulty temperature sensor include:

  • Inconsistent or fluctuating temperatures in the refrigerator or freezer
  • The refrigerator running continuously or not cooling properly
  • Error codes or indicators related to temperature control issues

Causes of a bad temperature sensor can include normal wear and tear over time, electrical malfunctions, sensor failure, or damage from moisture or condensation.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models. 

Do-It-Yourself Stories from Customers like You The refrigerator was freezing the food   Gary A. • Bonney Lake , WA • January 15, 2021

Watched a video. Ordered a thermistor. Made the fix. $100 total including expedited shipping. Diagnosing the problem was more stressful than fixing. Read more

More
$46.95
Compare At:
$55.87
You Save:
$8.92

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kitchenaid Defrost Thermostat
Genuine Whirlpool part
By: Whirlpool
Part Number: WP10442411

The Defrost Thermostat is an OEM part for Whirlpool refrigerators. It monitors the temperature of the evaporator coils and triggers the defrost cycle when the coils get too cold, preventing frost buildup and ensuring efficient cooling.  It operates by closing the heater circuit to initiate the defrost cycle. It opens the circuit when the temperature rises above 55 degrees Fahrenheit. It then resumes operation when the temperature drops to 20 degrees Fahrenheit.

Causes of a bad defrost thermostat can include regular wear and tear, exposure to moisture, or electrical issues. Over time, the thermostat may lose accuracy or stop working altogether, leading to frost accumulation or inefficient cooling.

Symptoms of a bad defrost thermostat include:

  • Excessive frost buildup in the freezer
  • The refrigerator running continuously or not cooling properly
  • The defrost heater not activating
  • The refrigerator cycling on and off frequently

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Freezer not defrosting
  • Frost buildup
  • Fridge too warm
  • Fridge runs too long
See more...
Do-It-Yourself Stories from Customers like You Amana br18vw refrigerator wasn't staying cold   Adrian B. • Chicago , IL • February 08, 2015

I am not new to APP, fixed a tub belt on a Maytag dryer in the past. My frig started getting warm so I went onto to one of those "lists" sites and found a appliance repair place. The guys were great and came out right away. The tech said it was the cold control and $260 later my part was replaced, about 30 minutes. Great I thought until my frig started getting warm again. Those cold sensors on the beer bottles are a great indicator. Not wanting to spend another $260 I looked up on APP to see if... Read more

More
$29.95
Compare At:
$43.93
You Save:
$13.98

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kitchenaid Bimetal Defrost Thermostat
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10165425

The Bimetal Defrost Thermostat is an OEM part for Whirlpool refrigerators. It plays a vital role in the defrost system, regulating the freezer temperature to prevent excessive frost buildup. The thermostat serves as a safety device by shutting off power to the defrost heater if the temperature gets too high, thereby protecting the appliance from overheating and potential damage. Its specifications include a 5-1/4" orange wire, a 25" brown wire, and a 1/2" clip.

You should replace the bimetal defrost thermostat if it becomes faulty. Over time, it can deteriorate due to normal wear and tear, electrical problems, or exposure to extreme temperatures, leading to malfunctioning of the defrost cycle.

Symptoms of a bad bimetal defrost thermostat include:

  • Excessive frost accumulation in the freezer
  • The refrigerator running continuously or not maintaining the proper temperature
  • The defrost heater failing to activate

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Freezer not defrosting
See more...
Do-It-Yourself Stories from Customers like You Coil in freezer iced up and refrigerator would not cool   David M. • Ambridge , PA • December 10, 2015

My unit has a bottom freezer that is a drawer. I had to remove the drawer, rack, glides, glide tracks, and ice maker to remove the rear panel. This was a little difficult but after researching a few videos on line I learned some tricks that made it easier. I used a hair dryer to melt the ice. This is best done with 2 people having one at the back to sponge the water into a bowl from the pan to avoid a water mess. Using a bolt meter I checked the heating element and found it had continuity. I... Read more

More
$54.34
Compare At:
$64.66
You Save:
$10.32

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kitchenaid Defrost Thermostat
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4387499

The Defrost Thermostat is an OEM part for Whirlpool refrigerators. The thermostat monitors the temperature of the evaporator coil and signals the defrost heater to turn on or off to prevent frost buildup, ensuring efficient cooling.

Causes of a bad defrost thermostat can include wear and tear over time, exposure to extreme temperatures, or electrical malfunctions.  

Symptoms of a bad defrost thermostat include:

  • Excessive frost buildup in the freezer
  • The refrigerator not maintaining the correct temperature
  • The defrost heater not activating
  • The refrigerator running continuously or not running at all

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Well we did not know what the problem was at first! refridgerator was warming up   Michaela S. • Rochester , WA • June 06, 2015

Watched a few of your well put together videos and could not afford a new Refrigerator right now because it was a built in so decided with the frost on the bottom of the freezer grill and the Refrigerator warming up decided to replace the Heater Element and Thermostat Defrost which took some time but so far so good lets hope that is all that is needed saved over 10,000.00 dollars for a new 48" built in for now! Thank you for your rushed order and videos I think you are a life saver got the part... Read more

More
$54.34
Compare At:
$64.66
You Save:
$10.32

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kitchenaid Defrost Thermostat
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2321800

The Defrost Thermostat is an OEM part for Whirlpool refrigerators. This thermostat monitors the temperature of the evaporator coil and activates the defrost heater to melt any frost that has accumulated. This process ensures efficient cooling and prevents ice build-up in the freezer.

You should replace the defrost thermostat if it becomes faulty or damaged. Causes of a bad defrost thermostat can include regular wear and tear, electrical issues, or exposure to extreme temperatures that can lead to malfunctioning.

Symptoms of a bad defrost thermostat include:

  • Frost build-up in the freezer
  • The refrigerator running constantly or not cooling properly
  • Water leaks inside the refrigerator
  • The defrost heater not activating

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You The fridge was not cooling and the freezer not freezing   Richard C. • Chesterfield , VA • August 18, 2015

Took everything out and transferred it to coolers etc. Unscrewed and took freezer unit apart ..Evaporator fan not working and made decision to replace motor and bi metal defrost thermostat. Order parts from Appliance Pros. com and the unit was put back together and so far it corrected the problem. The instructions and service were outstanding. Great Company. Read more

More
$52.29
Compare At:
$62.23
You Save:
$9.94

IN STOCK
Ships Today Guaranteed
Add to Cart
Kitchenaid Defrost Thermostat (Bi-Metal)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67006387

This defrost thermostat monitors the evaporator coil temperature and opens the circuit to end the defrost cycle once the coil warms. Replacing a failed thermostat restores automatic defrost to prevent heavy frost buildup and maintain consistent cooling performance. What it does and common signs it's needed:

  • Senses evaporator temperature to control the defrost heater: closes when cold, opens when warm to terminate defrost
  • Helps protect the freezer liner and components from overheating during defrost
  • Heavy frost or ice behind the rear freezer panel/evaporator cover
  • Poor cooling or temperature fluctuations due to airflow blocked by frost; defrost heater not energizing
What's included:
  • 1 defrost thermostat
Install notes:
  • Disconnect power before servicing
  • Remove the freezer's rear interior panel to access the evaporator; defrost any ice as needed
  • Mount the new thermostat firmly against the same evaporator tube location/orientation as the original for accurate sensing
  • Reconnect wiring, route away from the heater and moving parts, reassemble, and restore power

Do-It-Yourself Stories from Customers like You Ice making and temp control   Calvin G. • Portland , TN • October 14, 2019

Replaced defrost thermostat, replaced frig thermistor. Good experience. Excellent support and assistance for Maytag. Read more

More
$61.95
Compare At:
$73.72
You Save:
$11.77

IN STOCK
Ships Today Guaranteed
Add to Cart
Kitchenaid Defrost Thermostat (Bi-Metal)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2306462

This defrost bi-metal thermostat senses evaporator temperature during the defrost cycle and opens to stop heater power at the safe cutoff. Replacing a failed thermostat restores reliable defrosting and helps prevent ice buildup that restricts airflow and cooling.

  • Monitors evaporator temperature to control the defrost heater
  • Closes when cold to allow defrost; opens at cutoff to terminate defrost and prevent overheating
  • Helps maintain clear evaporator coils for proper airflow
  • Common symptoms: heavy frost on the back wall/evaporator, poor cooling, or defrost heater not energizing
What's included: One defrost thermostat Install notes:
  • Disconnect power before servicing; wear cut-resistant gloves
  • Access the evaporator; mount the thermostat in the original location with firm contact on the tubing
  • Transfer any original clip or insulation as found to ensure proper sensing
  • Secure all connections and route wiring away from the heater and moving parts; clear existing ice before restoring power

Do-It-Yourself Stories from Customers like You Freezer too cold   Eileen L. • Elmhurst , IL • May 17, 2015

Changed out the Bimeti - Def, or defrost thermostat. Super easy repair, took about 20 minutes total. So far it seems to have fixed it. Fingers crossed! Read more

More
$71.49
Compare At:
$84.36
You Save:
$12.87

IN STOCK
Ships Today Guaranteed
Add to Cart
Kitchenaid Defrost Bimetal Thermostat (Defrost Terminator), 1 Piece
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10160570

This defrost bimetal thermostat opens and closes with temperature to protect the evaporator from overheating during defrost. It helps clear frost buildup while preventing damage, supporting stable cooling and efficient refrigerator operation.

  • Monitors evaporator temperature and interrupts the defrost heater when the set limit is reached
  • Helps resolve symptoms like warm fridge/freezer, heavy frost on evaporator, or long/no defrost cycles
  • Can cause frequent temperature swings or compressor short cycling if failing
  • Typically mounted on or near the evaporator coil in the freezer
What's included: One defrost bimetal thermostat assembly Install notes:
  • Disconnect power before servicing; defrost ice as needed to access the evaporator area
  • Note wire locations; replace using existing connectors or approved splices
  • Ensure the thermostat clips firmly to the evaporator tubing in the original location
  • After install, restore power and confirm the unit enters and exits defrost normally

More
$61.76
Compare At:
$73.49
You Save:
$11.73

IN STOCK
Ships Today Guaranteed
Add to Cart
Kitchenaid Bimetal Defrost
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4387489

Ref Defrost Thermostat L70 Comes With Bracket

Do-It-Yourself Stories from Customers like You Noises from the fan, burnt bimetal defrost sensor   Mark G. • Truth Or Consequences , NM • March 16, 2019

Replaced the bad parts Read more

More
$51.28
Compare At:
$61.54
You Save:
$10.26

IN STOCK
Ships Today Guaranteed
Add to Cart
Kitchenaid Defrost Thermostat (Bi-Metal)
Genuine Whirlpool part
By: Whirlpool
Part Number: W10860146

This defrost thermostat senses evaporator temperature to control the defrost heater. Replacing a failed thermostat restores proper defrosting, prevents overheating during the defrost cycle, and helps maintain stable cooling performance.

  • Monitors evaporator coil temperature and closes to power the defrost heater during defrost
  • Opens the heater circuit as the coil warms to terminate defrost and prevent overheating
  • Helps clear frost from the evaporator so air can circulate between freezer and refrigerator
  • Failure may present as heavy frost/ice buildup, reduced cooling in the fresh food section, the evaporator fan hitting ice, or a defrost cycle that fails to start
What's included: One defrost thermostat Install notes:
  • Disconnect power before servicing; defrost heavy ice as needed for access
  • Located on/near the evaporator coil behind the freezer's rear panel, typically clipped to tubing
  • Match original clip orientation and wire routing; ensure firm thermal contact with the coil/tube
  • After installation, confirm operation with a continuity check at freezer temperature or run a manual defrost test per the service manual

Do-It-Yourself Stories from Customers like You Ice buildup   William C. • Hockley , TX • March 03, 2017

Replaced the Bimetal Defrost part and is working like a charm. Read more

More
$115.95
Compare At:
$139.14
You Save:
$23.19

IN STOCK
Ships Today Guaranteed
Add to Cart

If you're looking for KitchenAid defrost thermostat and sensor replacement parts, you've come to the right place. These essential components are critical in maintaining the functionality of your KitchenAid refrigerator, ensuring it operates smoothly and efficiently. Without a proper defrost thermostat and sensor, your fridge might struggle to regulate its internal temperature.

The KitchenAid defrost thermostat and sensor work together to manage the defrost cycle of your refrigerator. These parts are vital in preventing ice accumulation on the evaporator coils, which can obstruct airflow and affect cooling performance. Using OEM KitchenAid parts ensures you get high-quality, compatible components designed to fit seamlessly with your appliance, maintaining its optimal performance and longevity.

To keep your KitchenAid refrigerator in top-notch condition, having reliable defrost thermostat and sensor replacement parts on hand is essential. You can find these parts available, designed to match the quality and reliability that KitchenAid is known for. Whether you're looking to maintain or restore your fridge's functionality, these replacement parts offer an effective solution.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store