Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Norge Parts

Best Seller
Norge Dryer Drum Belt 92-1/4" 4-Rib
Genuine Whirlpool part
By: Whirlpool
Part Number: 341241

Get your dryer spinning smoothly again - install the Whirlpool 341241 OEM Drum Belt in minutes.

Why this belt?

  • Exact factory spec: 92 ¼-inch length × ¼-inch width, 4 ribs / 3 grooves - built to Whirlpool standards, not a generic copy.
  • Broad compatibility: Fits most Whirlpool-made dryers - Kenmore 110-series, Roper, Estate, Maytag, KitchenAid, Admiral, Crosley, Amana & more.
  • Quiet, durable rubber: Reinforced EPDM resists cracking and stretch for years of reliable tumbling.

Fixes these common dryer problems

Problem How the belt solves it
Drum won’t turn Transfers motor rotation to drum
Loud squealing / thumping Replaces stretched or frayed belt
Burning-rubber smell New belt stops slippage & heat build-up
Damp clothes / long cycles Restores correct drum speed & airflow


DIY install — about 15 minutes

  1. Unplug dryer; remove lint screen housing & front panel.
  2. Release belt tension at idler pulley; lift drum slightly to slide old belt off.
  3. Loop new belt around drum, idler pulley and motor pulley (ribbed side down).
  4. Re-assemble, run test cycle - enjoy quiet, consistent tumbling.

This part fixes the following symptoms
  • Heat stays on after drum has stopped
  • Will not tumble
  • Touchpad does not respond
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You Broken dryer belt   Bob B. • St Louis , MO • September 12, 2015

Unpluged dryer first. Then took the lint filter out and removed the two philips screws inside the lint filter lid. Then take a paint scraper just under the top of the dryer two inches from the left front corner and pushed in a little to release the snap connector and did the same on the right side. Then lifted top over. Then take a 5/16 socket or nut driver and remove the two screws on on the left inside panel, then the right side. Lean front out a little and remove the two wires one the back... Read more

More
$14.64
Compare At:
$17.42
You Save:
$2.78

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Dryer Gas Valve Coil Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279834

The Dryer Gas Valve Coil Kit is an OEM replacement part for Whirlpool dryers, as well as Kenmore and Samsung dryers. It is a set of coils that control the flow of gas fuel to the burner. The gas valve regulates the precise amount of gas needed to properly combust and generate heat for drying clothes. 

Causes of a bad gas valve coil can be wear and tear from regular use, lime or mineral buildup on the coils over time, or physical damage to the coils.

Symptoms of a bad gas valve coil kit include:

  • Inconsistent or incomplete drying  
  • Slow or intermittent drying
  • Burning smell from the gas dryer
  • Improper burner ignition or non-ignition

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Timer will not advance
  • No heat or not enough heat
  • Shuts off too soon
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Flame to dry clothes would go out after about a minute and wouldn't reignite   Wendell M. • Brown Deer , WI • June 19, 2014

I'm starting with a quick background on my dryer. About 18 months ago the belt on the dryer started slipping and squealing. I had a can of belt dressing spray so I popped the top open and sprayed the belt. It actually worked for about a year before it started squealing again. For the next 6 months I had to spray it more and more often. Then the clothes stopped drying. Obviously, at this point, I had to get off my lazy ass and fix the dryer. Searched my dryer's model number on the internet and... Read more

More
$27.21
Compare At:
$32.11
You Save:
$4.90

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Replacement Icemaker
Genuine Whirlpool part
By: Whirlpool
Part Number: D7824706Q

The Replacement Icemaker is an OEM replacement part for Whirlpool made refrigerators including Whirlpool, Amana, Maytag, and many others. It is a component responsible for producing ice cubes or crushed ice, ensuring a constant supply of fresh ice for your convenience. Measuring approximately 11 inches long and 5 inches wide, this ice maker assembly is made of durable plastic and metal

Symptoms of needing a replacement icemaker include:

  • No ice production or significantly reduced ice output
  • Ice cubes appearing misshapen or clumped together
  •  Leaks or water buildup in the icemaker area
  • Strange noises or grinding sounds coming from the icemaker

Causes of a faulty icemaker can include normal wear and tear over time, water supply issues, clogging or blockages, or electrical malfunctions.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

Please note: that this ice maker is a replacement only and not suitable for add-ons or brand-new installations. It does not include the harness or hardware. For wire harness(Plug)order WPD7813010. For cover order WPW10289690. For shut off bail arm order WP67004028.

This part fixes the following symptoms
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • Ice maker won't dispense ice
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Ice maker stopped producing ice   William W. • Southampton , NJ • July 31, 2015

My first hour: I investigated first by pulling out refridgerator to see if the water line hose was kinked. I started under the kitchen sink where it begins, coming from faucet water supply. Then I followed it to the back of the fridge to see if anything looked odd. Next I went to the ice maker itself. I investigated the ice maker by removing the freezer food sliding tray and hanging tray, and then unscrewing the door off the slides. When I looked inside at the ice maker, I saw the tube where... Read more

More
$95.95
Compare At:
$119.43
You Save:
$23.48

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Appliance Light Bulb
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009

Original Whirlpool light bulb, 40 watt.

Symptoms of needing to replace the light bulb include:

  • Dimming or flickering light
  • Complete lack of illumination inside the appliance
  • Visible signs of damage or burnout on the bulb itself

Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.

Do-It-Yourself Stories from Customers like You Jennair jjw9630cas double oven doors did not close all the way and the light would not go out   Wayne W. • East Longmeadow , MA • February 13, 2016

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

More
$17.76
Compare At:
$20.96
You Save:
$3.20

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Flame Sensor
Genuine Whirlpool part
By: Whirlpool
Part Number: WP338906

The Flame Sensor is an OEM replacement part for Whirlpool gas dryers. This component plays a critical safety role by monitoring the presence of the gas burner flame during the drying cycle.

Causes of needing to replace the flame sensor can include normal wear and tear over extended use, exposure to high temperatures or corrosion, or physical damage to the sensor itself.

Symptoms that may indicate a faulty flame sensor include:

  • The dryer not heating or producing heat properly
  • Error codes related to the gas system or ignition failure
  • The dryer shutting off unexpectedly during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models. 

This part fixes the following symptoms
  • Shuts off too soon
  • No heat or not enough heat
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You 11 year old kenmore elite gas drye stopped working initial diagnosis: burner would light but would shut off in 3 or 4 minutes   Jay W. • Dallas , TX • April 05, 2015

I used Fixya as an initial source describing my problem. I got two responses which were very helpful. One that the "coils" were probably the problem. Two, that the problem could be the thermostat or a thermistor in the dryer. I verified that AC was coming from the timing control, that both the two terminal and three terminal coils,the igniter and shut off thermostat all had continuity. I then applied AC directly to the coils: the two terminal coil ""clanked" and I interpreted that as the coil... Read more

More
$34.95
Compare At:
$41.59
You Save:
$6.64

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Oven Temperature Sensor Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001656

The Oven Temperature Sensor Kit is an OEM part for Whirlpool ovens. This sensor is essential for monitoring the oven's internal temperature, ensuring that it reaches and maintains the correct temperature for baking and cooking. The sensor is approximately 7 inches long.

Over time, the oven temperature sensor can fail due to repeated heating and cooling cycles, exposure to spills or grease, or electrical issues. When the sensor malfunctions, it can result in inaccurate temperature readings, affecting cooking performance and food quality.

Symptoms of a bad oven temperature sensor include:

  • The oven not reaching the set temperature
  • Food cooking unevenly or not fully
  • The oven overheating or underheating
  • Error codes related to temperature issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Oven is too hot
  • Little to no heat when baking
  • Won't start
  • Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You Jenn Air stove JDS9860CDB00 error code 1d11 oven not shutting off.   Joe D. • New Berlin , WI • March 20, 2019

First of all Appliance Parts Pros is the best!! I would not have had the confidence to make this repair myself without their outstanding videos and Q&A sections on their website. And their prices for parts are very competitive. Like many stories on the website, my oven would heat up beyond the temperature set point. When it reached the target temperature, the lower heating element (I think this is the “bake” element) would shutoff, but the top element (“broil” element I believe) would remain on... Read more

More
$41.95
Compare At:
$49.92
You Save:
$7.97

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Top Burner Receptacle Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 330031

The Top Burner Receptacle Kit is an OEM part for Whirlpool ranges and cooktops designed to provide a reliable electrical connection between the stove's top burners and the power source. This kit typically includes receptacles, wire terminals, and mounting hardware necessary for the installation, ensuring that each burner receives the proper electrical current to heat efficiently. 

Causes of a bad top burner receptacle can include corrosion due to spills or moisture, physical damage from heavy use, or natural wear and tear over time. 

Symptoms of a bad Top Burner Receptacle Kit include:

  • A burner that doesn't heat up
  • Intermittent heating or fluctuating temperatures
  • Visible signs of damage or corrosion on the receptacle
  • Sparks or short circuits when attempting to use a burner

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Our range needed 4 new range top elements due to wear   Dale D. • Orlando , FL • December 05, 2014

Personally I have experience working with electricity and knowing if I bought the part required this would be an easy fix. I got my model number and contacted Appliance Parts Pros and placed my order for the new elements, terminal blocks, and for appearance purposes 4 new Drip Pans. Excellent service and quick shipping. I ordered my parts on Sunday and received them on Tuesday. This was a simple repair that only required a screwdriver to remove the old terminal block from the range hood, wire... Read more

More
$15.66
Compare At:
$18.79
You Save:
$3.13

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Washer Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21352320

The Washer Drive Belt is an OEM part for Whirlpool washing machines. It is crucial for transmitting the power from the motor to the drum, enabling the washing machine to tumble and spin during the wash and spin cycles. The drive belt wraps around the motor and drum pulleys, providing the necessary traction and tension to operate efficiently.

Causes of a bad Washer Drive Belt can include stretching over time, which reduces its efficiency to grip the pulleys properly, or fraying and cracking due to age and normal wear and tear. Misalignment or improper installation can also lead to premature belt failure.

Symptoms of a bad Washer Drive Belt include:

  • The washing machine failing to spin or agitate.
  • A burning smell or unusual noises during operation, indicating slippage or rubbing.
  • Visible signs of wear like cracks, fraying, or noticeable looseness on the belt.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Burning smell
  • Will not agitate
  • Spins slowly
  • Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You The drive belt on my maytag washing machine was worn out   Donnie B. • Campobelly , SC • July 23, 2014

I Purchased a new belt and replaced it. If I had not watched the video telling me how it is done the job would have been much more difficult. After watching the video I changed the belt in less than 2 minutes. I ordered the belt from Appliance Parts Pros and got it the next day. I am thankful that when I started my search I landed on your web site. Thanks for the quick service and the video. Read more

More
$15.95
Compare At:
$23.33
You Save:
$7.38

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Oven Bake Element
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74010750

The Oven Bake Element is an OEM part for Whirlpool ovens. This crucial component is responsible for providing the heat necessary for baking. Located at the bottom of the oven, the bake element heats up when electricity passes through it, allowing your oven to reach the desired cooking temperature. This OEM Replacement Part has push-on terminal ends and measures approximately 23-5/8"wide x 15-3/8" long, with 3-3/8" inserts

Symptoms of a failing oven bake element include:

  • Lack of heat production when the oven is turned on
  • Uneven baking results
  • Visible damage to the element such as blistering or splits
  • A trip in the circuit breaker when the oven is activated

Causes of bake element failure typically include thermal stress causing material fatigue, accidental damage during cleaning, and electrical issues such as short circuits.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

If you are unable to use your old connectors order TJMA02875-1.

This part fixes the following symptoms
  • Little to no heat when baking
  • Oven not heating evenly
  • Element will not heat
  • Oven is too hot
See more...
Do-It-Yourself Stories from Customers like You The baking element was on fire   Charles M. • Bandera , TX • March 30, 2014

I finally found the right serial number and found the part at Appliance Parts Pros. I was skeptical that they would send the element that had the correct rear brace fixture. when it came 2 days later i opened the box the Part was correct and it took about 15 minutes to replace since there are only two screws. My oven works fine now. THX Read more

More
$39.95
Compare At:
$47.14
You Save:
$7.19

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Thrust Bearing Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002213

The Thrust Bearing Kit is an OEM part for Whirlpool washing machines. This kit is essential for the proper operation of the washer's transmission system, allowing the drive system to engage smoothly and efficiently. 

Over time, components within the thrust bearing kit can wear down or become damaged due to the constant stress and movement they endure during the wash cycle. This wear can lead to issues with the washing machine's ability to agitate or spin correctly.

Symptoms of a bad Thrust Bearing Kit include:

  • The washing machine is noisy during operation
  • The washer struggles to agitate or spin
  • The washing machine may fail to spin at all, leaving clothes wet at the end of the cycle
  • Excessive vibration during use

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Spins slowly
  • Pumps but will not spin
  • Will not agitate
See more...
Do-It-Yourself Stories from Customers like You Washer squeaked when tub is stopped during spin cycle   Daniel K. • Grafton , WI • July 22, 2018

My Maytag washer make a loud screech when the washer tub needed to be stopped by the brake. Last year, I had replaced the suspension springs, the snubber ring, the drive belt and the drain pump. Those repairs worked fine, but a few weeks later, the screeching noise started. So I figured it was the brake system. I thought it would be better to replace the brake rotor and stator together as a set since I was going to disassemble both and they were 18 years old anyway. I decided to replace the... Read more

More
$43.95
Compare At:
$59.58
You Save:
$15.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Stove Top Drip Pan
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10196405

The Stove Top Drip Pan is an OEM replacement part for Whirlpool ranges. It is the shallow metal pan located below the stove burner elements that collects grease and food particles. The drip pan helps direct spills and drips away from the burner area to the bottom drawer for easy cleanup. 

Symptoms of a bad drip pan include:

  • Grease or food spilling below the burners outside of the pan
  • Burner elements showing signs of corrosion or damage from drips
  • The drip pan no longer fitting properly or securely in place

Causes can be warping or damage of the drip pan over time due to exposure to heat. Dents and structural changes compromise its ability to direct drips properly.

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

If you require a compatible 6-inch drip bowl, suggest considering our WPW10196406 model for a perfect fit. For a black option include the 6-inch W10290353RW and 8-inch WPW10290350 models.  

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Our range needed 4 new range top elements due to wear   Dale D. • Orlando , FL • December 05, 2014

Personally I have experience working with electricity and knowing if I bought the part required this would be an easy fix. I got my model number and contacted Appliance Parts Pros and placed my order for the new elements, terminal blocks, and for appearance purposes 4 new Drip Pans. Excellent service and quick shipping. I ordered my parts on Sunday and received them on Tuesday. This was a simple repair that only required a screwdriver to remove the old terminal block from the range hood, wire... Read more

More
$9.95
Compare At:
$11.94
You Save:
$1.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Stove Top Drip Pan
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10196406

The Stove Top Drip Pan is an OEM replacement part for Whirlpool ranges. It is the shallow metal pan located below the stove burner elements that collect grease and food particles. The drip pan helps direct spills and drips away from the burner area to the bottom drawer for easy cleanup. 

Symptoms of a bad drip pan include:

  • Grease or food spilling below the burners outside of the pan
  • Burner elements showing signs of corrosion or damage from drips
  • The drip pan no longer fitting properly or securely in place

Causes can be warping or damage of the drip pan over time due to exposure to heat. Dents and structural changes compromise its ability to direct drips properly.

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This drip pan measures about 7-2/3 inches in diameter. Matching 8 inch drip bowl: WPW10196405. Same drip bowls in porcelain black: 6 inch W10290353RW and 8 inch WPW10290350. You may also consider buying a second set for when company comes over or for the holidays.

Do-It-Yourself Stories from Customers like You Our range needed 4 new range top elements due to wear   Dale D. • Orlando , FL • December 05, 2014

Personally I have experience working with electricity and knowing if I bought the part required this would be an easy fix. I got my model number and contacted Appliance Parts Pros and placed my order for the new elements, terminal blocks, and for appearance purposes 4 new Drip Pans. Excellent service and quick shipping. I ordered my parts on Sunday and received them on Tuesday. This was a simple repair that only required a screwdriver to remove the old terminal block from the range hood, wire... Read more

More
$10.47
Compare At:
$12.46
You Save:
$1.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Flat Style Oven Igniter Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 12400035

The Flat Style Oven Igniter Kit is an OEM part for Whirlpool ovens. It is designed to ignite the gas in the oven burner, facilitating the start of the heating process. This igniter is crucial for ensuring your oven heats up quickly and efficiently, providing the necessary flame for cooking and baking.

Symptoms of a bad Oven Igniter include:

  • The oven failing to heat up or taking a long time to reach the desired temperature.
  • A noticeable gas smell when the oven is turned on, indicating the gas is not igniting.
  • The igniter glowing without producing a flame, which can point to a lack of adequate temperature to ignite the gas.

Causes of a bad oven igniter can include the wear and breakdown of the igniter element over time, a faulty electrical connection, or a disruption in the gas supply.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Little to no heat when broiling
  • Gas igniter glows, but will not light
  • Little to no heat when baking
  • Gas smell
See more...
Do-It-Yourself Stories from Customers like You Magic chef broken oven igniter   Richard C. • Kew Gardens , NY • July 13, 2015

Followed linked video instructions and replaced with new flat style Oven Igniter Kit. Some repair info background, while out shopping for a replacement oven ($1000 plus) a terrific salesman listened to the issue with my current oven and recalled his same issue and solution. I thanked him for his time and recommendation. I went home and searched "oven Ignitor" where I was led to this website. The video showed the same exact flat oven igniter and how easy it would be to replace it. I immediately... Read more

More
$47.95
Compare At:
$57.06
You Save:
$9.11

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Snubber Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21002026

The Snubber Ring is an OEM part for Whirlpool washing machines. This part dampens the vibration and noise produced during the washer's spin cycle. Positioned at the base of the tub, the snubber ring provides a cushion that absorbs the impact between the moving parts and the stationary frame of the washer. 

Over time, wear or dust on the snubber ring can reduce its effectiveness, causing increased vibration, noise, and stress on the washing machine components, possibly leading to premature failure.

Symptoms of a bad Snubber Ring include:

  • Unusual noise during the spin cycle
  • The washing machine vibrating more than usual or "walking" across the floor
  • Increased wear and tear on other components due to excessive vibration

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms
  • Shakes and moves
  • Noisy
  • Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You Loud knocking and rattle while in spin cycle.   Daniel K. • Grafton , WI • July 30, 2017

18 year old Maytag Atlantis top load washer had a load knocking and rattle sound with excessive vibration when the tub was spinning, but not when it was agitating. They was no water leaking. I took the front panel off and carefully listened while I ran a cycle and the loud sound sounded like it was coming from the drain pump. So I took off the drive belt and noticed that it was glazed and that there was belt material on the drain pump and tub transmission pulleys. I removed the drain pump and... Read more

More
$9.95
Compare At:
$11.84
You Save:
$1.89

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Condenser Fan Motor Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 833697

This OEM Replacement Part is a high-quality, 2-watt condenser fan motor for Whirlpool refrigerators.The motor is designed to optimize your refrigerator's cooling performance. This 115-volt motor operates with a clockwise rotation.  

Symptoms of a bad condenser fan motor kit include:

  • Gradual rise in interior freezer temperatures
  • Inability to maintain consistent cooling performance  
  • Loud buzzing or grinding noises coming from inside
  • Tripped breakers or failure to restart after service

Causes stem from normal wear of ball bearings as the high-efficiency motor operates continuously. Exposure to dust or debris introduced through openings accelerates wear over many years of use.

This OEM part is also compatible with brands including Kenmore, KitchenAid, and Danby.

This part fixes the following symptoms
  • Fridge runs too long
  • Noisy
  • Freezer section too warm
  • Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You Conderser motor went out   David W. • Durand , MI • April 03, 2014

After reviewing the 'how to' video on AppliancePartsPros.com, I unplugged the refrigerator and removed the back cover to access the motor. I then unplugged the wiring and removed the bad motor. I cut the clip plug and wired it to the new motor, installed the fan blade from the old motor and re-installed the new motor. After connecting the clip plug and re-installing the back cover, I plugged the refrigerator in and checked the interior about 5 minutes after the repair. Everything has been... Read more

More
$61.95
Compare At:
$73.72
You Save:
$11.77

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Door Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: W11384469

The Door Switch is an OEM part for Whirlpool refrigerators. This switch plays a crucial role in monitoring the status of the refrigerator door. It detects when the door is open and closed and signals the refrigerator to suspend or resume cooling operations accordingly. 

Causes of a bad door switch can include general wear and tear over time, exposure to moisture, or impact damage. Please check for proper connection and that the wires are intact before replacing the switch.

Symptoms of a bad door switch include: 

  • The refrigerator fails to resume cooling after closing the door
  • The inside light fails to turn on when the door is opened
  • Abnormal energy usage due to improper door monitoring

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Do-It-Yourself Stories from Customers like You Fridge interior light kept going out   Phil D. • Phoenix , AZ • June 16, 2014

Replaced door switch - it took less than 5 minutes - works perfectly Read more

More
$29.30
Compare At:
$35.16
You Save:
$5.86

IN STOCK
Ships Today Guaranteed
Add to Cart

Norge replacement parts are essential for keeping your appliances running smoothly. Whether you're dealing with a refrigerator, washer, or dryer, having the right parts on hand ensures that your appliance can maintain its top-notch performance. Norge parts are designed to fit seamlessly and work flawlessly, making them indispensable for any home appliance.

When we think about how many times a week we rely on our appliances, it's clear how important it is to have reliable components. Norge parts help extend the life of these machines by replacing worn-out or malfunctioning parts. OEM replacement parts, which are created by the Original Equipment Manufacturer, are especially valued for their high quality and perfect compatibility with your appliance. These parts are made specifically for Norge appliances, ensuring they will fit and function just as the original parts did.

You can rest easy knowing that high-quality Norge replacement parts are readily available to keep your appliances operational. No need to worry about cumbersome fixes or compromised performance—just the confidence that comes with using parts designed to get the job done right.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store