We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix ice buildup on evaporator coils or inconsistent cooling with this refrigerator temperature sensor. Easy DIY repair with our video guide.
Poped off plastics caseing inside the frigerator. Unscrewed 4 screws holding black fan inplace. Followed yellow wire to locate white sensor. Need to be careful not to break styrofoam, don't force it, it should seporate from plastic easy as long as the 4 screws are out. Swap it for the new one and button it back up. While I was in there I replaced the defrost sensor and the other sensor next to the heating rod. Also I know there is an issue with drain hole plugging up with ice so I extended the... Read more
Most orders arrive by Tuesday, November 24
Removes chlorine, lead, and mercury for clean, fresh-tasting water. Replace every 6 months or when flow decreases. Confirm fit with your model number.
I called your company with the serial number of the fridge, and had the best service locating the exact items i needed. I placed by order . and company called to confirm my order and the method of my payment. Thank you very much Read more
Refrigerator not cooling or ice building up? The evaporator fan motor circulates cold air. Common DIY repair when fridge runs warm or makes noise.
Replaced fan motor, temperature sensor and defrost thermostat. Note: I had to replace connector on new defrost thermostat. Connector on new part did not fit mating connector in refrigerator.. spliced in old connector for new one. Read more
The Refrigerator Flap Door Hinge is a crucial component for ensuring your Samsung refrigerator operates smoothly and efficiently. Designed specifically for Samsung refrigerator models, this genuine OEM part guarantees a perfect fit and reliable performance. The hinge facilitates seamless opening and closing of the flap door, maintaining proper alignment and preventing any unwanted gaps that could affect your applianceGÇÖs cooling efficiency. Made from durable materials, the Refrigerator Flap Door Hinge is built to withstand regular use, ensuring long-lasting functionality. Installing this hinge is straightforward, allowing you to restore your refrigeratorGÇÖs performance without hassle. By choosing this genuine OEM part, you ensure that your refrigerator continues to operate as intended, preserving the freshness of your stored items and enhancing the overall user experience. Whether your existing hinge is worn out or damaged, the Refrigerator Flap Door Hinge provides a dependable solution to keep your Samsung refrigerator in optimal condition.
I loosened middle hinge by the 2 screws which holds a power cord that clips together, then slid the hinge flap upward to release from the door. My bottom clip hinge was broken away from spring and the only way to attach a new hinge clip was to carefully separate the hinge flap. This can be done by squeezing the flap to see where the separation seams are. Small narrow screwdrivers along with a spatula will do without damaging the plastic. This allowed for acess to the spring which connects to a... Read more
Ice maker stopped working or won't eject cubes? This ice maker assembly restores automatic ice production. Easy DIY install—just 2 screws and 1 harness.
After searching for information, the best guess was a defrost problem, so I first fully defrosted and reset the ice maker (this is the recommendation of Samsung and others on the net). This did not fix the problem. Next best guess was water fill valve, but after removing ice maker from fridge, determined it had cubes in it but would not eject. So, finally decided to order replacement ice maker. If you search the next for this model (DA97-13178A) there are instructions for removal of the ice... Read more
The Refrigerator Door Interlock Switch is essential for maintaining the proper operation of your refrigerator. This genuine OEM part ensures that your refrigerator doors close securely, allowing the appliance to maintain the correct temperature and efficiency. By accurately detecting whether the door is open or closed, the switch helps prevent energy loss and ensures that your food stays fresh longer. Designed specifically for Samsung refrigerators, this interlock switch offers a reliable and precise fit, making it a perfect replacement for any faulty or worn-out switches. Installing this genuine OEM part is straightforward, helping you restore your refrigeratorGÇÖs functionality quickly and easily. With the Refrigerator Door Interlock Switch , you can trust that your Samsung refrigerator will operate smoothly, providing you with peace of mind and a consistent cooling performance. Upgrade your appliance with this dependable component and enjoy the benefits of a well-functioning refrigerator.
Perfect, everything works now Read more
The Refrigerator Y-Clip Assembly is essential for maintaining the stability and alignment of your bottom-mount Samsung refrigerator. This genuine OEM part ensures a precise fit, supporting the internal components of your appliance effectively. Crafted from durable materials, the Y-Clip Assembly helps prevent unnecessary movement and potential damage, enhancing the overall longevity of your refrigerator. Installing this part is straightforward, allowing you to restore your fridgeGÇÖs functionality quickly and efficiently. The Refrigerator Y-Clip Assembly is compatible with a variety of Samsung bottom-mount refrigerator models, providing a reliable solution for your repair needs. By choosing this genuine OEM part, you ensure that your refrigerator operates smoothly and maintains its optimal performance. Trust in the quality and compatibility of the Y-Clip Assembly to deliver a seamless and durable repair, improving your applianceGÇÖs reliability and your overall customer experience.
Replaced a rectangular gasket in the rear of the ice maker....caulked the edges of the ice maker. Read more
Refrigerator compressor won't start after power surge? This overload protector prevents electrical damage to your compressor. DIY repair in 30 minutes.
Took a bit to diagnose. First tried cleaning coils but the problem still persisted. Next took of the back panel and put the system into diag mode. (Press energy save button and fridge button for eight seconds system ding once a second and inverter board red LED will blink a code or be on solid if no issue. See back of the refrigerator for a sticker with what the number of blinks means. My unit one blinking 1 time. So I measured the resistance of the compressor between windings (8.9 ohms between... Read more
Fix ice or water that won't stop dispensing with this dispenser control switch. Resolves stuck dispenser issues. DIY repair in under 30 minutes.
First, I modified old butter knife by bending a 90° angle about 3/4" from the tip. I slid the bent in up under the bottom of the switch cover and worked it to one side. I then rotated the knife downward using the bent end to pry the cover off. The switch is held by plastic arms on each side. The bottom right arm has a locating pin that fits into the switch. Unplugged the switch and re-installed. Read more
The Evaporator Defrost Heater Bracket for Refrigerator is essential for maintaining your Samsung refrigerator's optimal performance. This genuine OEM part securely holds the evaporator defrost heater in place, ensuring effective defrost cycles that prevent frost buildup. By maintaining proper heater alignment, it helps your refrigerator operate efficiently, reducing energy consumption and extending the appliance's lifespan. Specifically designed for Samsung refrigerator models, this bracket guarantees a perfect fit and seamless integration with your existing system. Installing the Evaporator Defrost Heater Bracket restores the defrost mechanism's reliability, ensuring your fridge stays cool and your food remains fresh. Made from durable materials, this genuine OEM part withstands regular use and provides long-lasting support. Whether you're replacing a worn or damaged bracket, this component is the ideal solution to keep your refrigerator functioning smoothly. Trust in the Evaporator Defrost Heater Bracket for Refrigerator to deliver consistent performance and enhance your appliance's defrosting capabilities.
Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more
Replacement rear caster wheel for refrigerators. Restores mobility when original wheel is broken, cracked, or damaged. Mounts to bottom rear of unit.
I have a large Samsung 4 door refrigerator. One of the rear wheels broke. To replace it, you need the wheel and the shaft. To lift the refrigerator for the repair, I had my wife stand in front of it with her foot on a board that was wedged against the front wheels. I then pushed the refrigerator up from behind and slid a 3/4" piece of plywood underneath the bottom with my foot. This gives you enough space to do the repair. After removing the back cover, it's best just to knock out the broken... Read more
The Refrigerator French Door Cap is an essential component for maintaining the sleek appearance and functionality of your Samsung French door refrigerator. Crafted as a genuine OEM part, this cap ensures a perfect fit and seamless integration with your appliance. Designed to protect the casing around the French doors, it helps prevent wear and tear, keeping your refrigerator looking new for longer. The durable construction of the Refrigerator French Door Cap provides reliable coverage against scratches and impacts, enhancing the overall durability of your fridge. Installing this cap is straightforward, allowing you to quickly restore the original look of your Samsung refrigerator without the need for professional assistance. By choosing this genuine OEM part, you can be confident in the quality and compatibility, ensuring your appliance operates smoothly. Whether you need to replace a cracked, missing, or damaged cap, the Refrigerator French Door Cap is the perfect solution to maintain the aesthetic and functional integrity of your Samsung refrigerator.
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more
Replacement axle pin that secures roller wheels to the refrigerator base. Needed when original pin is damaged, corroded, or broken during wheel replacement.
Samsung does not make it easy to replace the casters. The shafts holding the casters are crimped at the ends and had to be cut off with little room for any tools. I had to jack up the fridge and I used a hacksaw blade with a handle to cut through the wheel shafts. I didn't want to use a reciprocating saw. I couldn't find a way to crimp the new shafts so I drilled small holes at the ends and used cotter pins to retain the shafts in place.The rear caster had no room to slide the new one in... Read more
Fridge not cooling or freezer warm? A failed evaporator fan motor stops cold air circulation. This direct-fit motor restores proper airflow and temperature.
I replaced the cooling fan. Read more
Connects your refrigerator to the wall outlet. Replace if the cord is severed, the plug prongs are broken, or the ground terminal is damaged or missing.
I started by replacing the water filter assembly since it was leaking after I attempted to install a non-name-brand filter. The new assembly didn't fix the problem (but was hard to find, and AppliancePartsPros was amazing in being able to get one). Further, while replacing that I noticed that the previous owner had literally cut out the grounding pin from the power cord. I decided to replace the power cord and the Ice Maker Assembly. None of the online stores seemed to have either part listed... Read more
Fix a refrigerator that won't cool or runs warm. This condenser fan motor assembly replaces failed motors causing cooling problems. DIY-friendly repair.
Replaced the condenser fan. Read more